FSI DIOT Photodetection module 8ch hardware versions
v1 | v2/v2.1/v2.2 | v2.3 | |
---|---|---|---|
Production date | 10/2021 | 07/2022 | N/A |
Units | 3 | 2 | N/A |
Initial prototype | x | ||
Enabled DC-coupling (default is AC) on channel 1 via relay | x | ||
Moved configuration flash not to collide with mechanical part of the PCI Serial connector | x | ||
Allow for 5x amplification by changing resistor | x | ||
Placed pigtails at an angle recommended by GM | x | ||
Fixes and improvements based on feedback from pcb review 1: #2 (closed), #3 (closed), #5 (closed) #10 (closed), #9 (closed), #14 (closed) | x | ||
Added clips to hold EMC shielding, holes to attach the fiber spool holder | x | ||
Add dc blocking cap on TIA's negative output: #21 (closed) | x | ||
IC1 wrongly listed not_mounted in BOM: #22 (closed) | x | ||
Improve front panel: #23 (closed), #24 (closed) | x |