Explore projects

Tool for generating multi-purpose makefiles for FPGA projects.

Main features:

makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefiles

Hdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page

Software to support the fmc-adc-100m14b4cha mezzanine, including Linux device driver, library and test program.

A software framework for Linux device drivers aimed at supporting controls and data acquisition hardware. ZIO supports sub-nanosecond timestamps, block-oriented input and output and transport of meta-data with the data samples. Users can change the buffer type and trigger type associated with a device at run time, and all of devices, triggers and buffers are easily implemented as add-on modules.

The PF_ZIO implementation, currently in beta status, implements a network interface to the ZIO transport, which allows each I/O channel to generate or receive network frames. Applications see the network of devices and can talk with several of them from the same socket. We support SOCK_STREAM, SOCK_DGRAM and SOCK_RAW.

The uRV (Micro RISC-V) core is a small-sized implementation of a 32-bit RISC-V core, targeted specifically at FPGAs. More info at the Wiki page

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here

The DAPHNE front end board is a piece of hardware that digitizes the output signal from one of the systems of the far detector in the DUNE experiment. For more information, see the wiki

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS