Explore projects

The TimEX3 is a multipurpose compact PCI board designed to perform simple to medium complex logical functions. It is mainly used for the synchronization system of SOLEIL (signal duplication, top-up gating, etc.). This board is based on a Spartan-6 FPGA and PLX PCI9030 interface. It is designed with KiCad software, and released under CERN OHL License.

Host-side software support for the TDC FMC on the SPEC and SVEC FMC carriers.

More info at the Wiki page

HW project: https://www.ohwr.org/project/fmc-tdc/wiki

MasterFIP is an Open Hardware implementation of a WorldFIP master node.

Project holding machines and mechanical hardware tools as subproject.

This project contains gateware for the Distributed IO Tier demonstrator according to the CERN Warm Interlocks specification

Common gateware for the different level conversion circuits.

Software to support the MasterFIP, including Linux device driver, library and test program.

Software for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Software support for the SVEC board, including kernel and user-space Linux code.

The AsyncArt Project is comprised by a set of Open-Source HDL libraries and examples targeted to the efficient implementation of Globally Asynchronous, Locally Synchronous (GALS) design architectures over Commercial-Off-The-Shelf FPGA devices.

Optical flow cores process a 640x480 video sequence and estimate direction and speed of the objects in the scene (fixed-point Q7.4) up to 32 fps. A Lucas-Kanade gradient-based and a phase-based Handel-C implementations are provided.

A radiation-tolerant digital I/O module with sixteen 24 Volt optically isolated inputs and outputs. 3U module with AirMax backplane connector for DIOT crate.

This is a port of an older Linux ptpd to support White Rabbit extensions and run both in hosted and freestanding environment. In the future we plan to replace it with PPSI, which has a much better design, but ptp-noposix is currently working pretty well despite being difficult to maintain.

Quad 10MBd POF/HCS optical receiver (10Mbd) FMC card using an LPC connector.

The FMC bus abstraction implements a Linux kernel bus named fmc. This allows to deal with FMC mezzanines in a carrier-independent way

FMC DTX 4CHA is a four channel differential line driver on an FMC. Each channel is driven by a CLC006 IC with max data rate 400 Mb/s. Connector type: LEMO EPG.00.302.NLN.

More info at the Wiki page

Gateware (HDL design) for FMC ADC 400k 18b 4cha iso on SPEC and SVEC carriers.

Fanless version of the White Rabbit Switch WRS-3/18 (hardware version 3.4) with the low-jitter daughterboard integrated. More info at the Wiki page

FMC 4 channel Serial link transceiver with differential LEMO connectors. Each channel has a MAX3441EESA+ transceiver which follows the RS485 standard. More info at the Wiki page

DI/OT Peripheral Board Loop-back. More info at the Wiki page