Explore projects

PCIe to VME bridge. More info at the Wiki page

Linux device driver and associated utilities for PCIe FMC carriers. Aka GnuRabbit.

AFCZ is dual FMC carrier in AMC format based on ZU7EV or ZU11EG SoC devices. It supports White Rabbit and RTM modules. More info at the Wiki page.

Gateware and software for the data acquisition path of the FSI project

Projects around SFP modules (Small-Form-factor Pluggable optical transceivers) are subprojects of this project.

Triple 10MBd POF/HCS optical receiver with single optical transmitter (10Mbd) using an LPC connector.

A USB controlled switch box with 1 to 4 switching. Can send out a reference voltage. Multiple configurations possible. Used for the calibration of ADC, TDC and Fine delay mezzanines. More info at the Wiki page

Hardware design of Conv TTL RS485

Production and functional tests for PandABox.

More info at the Wiki page

Enumerates the capacitors in an Altium design by parsing the EDIF netlist and library, showing if insufficient voltage ratings are used (derating). More info at the Wiki page

This project covers the hardware development of the White Rabbit switch.

Gateware for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Gateware (HDL design) for MasterFIP.

GTS is a tool which takes a binary for a given microprocessor (initially an LM32) and gives information about worst-case execution time.

Hardware designs for ROBIN-NP project.

4-channel 16-bit 130 MS/s (700 MHz analog input bandwidth) ADC (LTC2208) FMC module.

This project covers all efforts geared to standardize White Rabbit, with a view to providing a stable specification which everyone can use to build compliant products.

A project to host all software and hardware developments related to testing the White Rabbit switch.

FMC HPC PT100 temperature sensor interface card. Allows connection of 15 sensors in a 4-wire configuration. Used in SAMbuCa project. More info at the Wiki page

Motor driver to control stepper and DC brushed motors in constant current or speed control. Used in SAMbuCa project. More info at the Wiki page