Explore projects

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

This project defines data structures, to be embedded in the FPGA memory address space, to enumerate the devices that have been synthetized in the current design. The same structure is also used as a simple flash file system. AKA Self-Describing Bus (SDB) Specification for Logic Cores. The layout is simple enough to be parsed both by the host and by the internal soft-core, if any.

The documentation is public, and related code is GNU GPL licensed.

The robustness of a White Rabbit Network (WRN) is a broad subject covering methods (HW & SW) which enable to increase overall reliability of a WR-based system. This includes Forward Error Correction (FEC), Quality of Service (QoS) assurance, support of network redundancy, proper network design, thorough diagnostics, and increasing the reliability of network components (i.e. switches, nodes). Here, these methods are described and their implementation sources gathered.

PUMA (Plataforma Utilizada para el Muestreo de Arapuca) is a multi-channel digitizer designed to instrument the photon detection system for the DUNE Photon Detection System. However, it may be useful for other applications that require 40 - 64 channels of 14-bit digitzier sampling at 10MSample/s - 65MSample/s. PUMA is based on the digitizer designed for the SoLiD short baseline reactor neutrino detector. It is designed to be connected to external signal conditioning modules, which are controlled by I2C. More info at the Wiki page

Placeholder for cards in Eurocard format

FMC DIO 32CH LVDS is a universal 32-channel bi-directional LVDS card. It uses a VHDCI connector compatible with standard SCSI cables. There is also micro-HDMI connector on the front panel with I2C and some LVDS signals so that standard HDMI cables can be used. Each channel may be optionally AC-coupled (0R resistors need to be removed) and is ESD-protected. All channels are terminated to 1.65V by two 50 Ohm resistors. The direction of each channel is programmed via a serial interface. The VHDCI connector has also 3.3V supply and buffered I2C interface. The direction of each channel is programmed via a serial interface. More info at the Wiki page

The VFC is a VME carrier for two VITA 57 (FMC) mezzanines. For more details please refer to the wiki pages. Obsolete project. Replaced by VFC-HD.

This project focuses on performing with high precision the core WR PTP calculations in fixed-point arithmetic. This will ensure uniform input parameters, code and precision across all WR implementations.

This is a collection of simple macro implementations for Microsemi's ProASIC3 FPGAs to allow simulating post-synthesis designs using GHDL.

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

VentilatorPAL is a high-quality and low-cost, open source ventilator. More info at the Wiki page

PROFIP is a gateway between PROFINET-IRT and WorldFIP that allows for a deterministic low-latency exchange of the cyclical process data between the two networks. More info at the Wiki page

SAMbuCa is a flexible and modular low-level control solution for mechatronics devices, developed in the PXIe format. More info at the Wiki page

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

Firmware for ROBIN-NP project.