Newer
Older
#ifndef _MEM_LAYOUT_H_
#define _MEM_LAYOUT_H_
#include "mem_layout_common.h"
#define NUM_MAX_SLOTS 12
#define NUM_MAX_BPM_PER_SLOT 2
#define NUM_MAX_BPMS (NUM_MAX_SLOTS * NUM_MAX_BPM_PER_SLOT)
#define NUM_FMC130M_4CH_SMIOS 2
#define NUM_FMC250M_4CH_SMIOS 2
/*********************** Static AFCv3 FPGA layout ***********************/
/* Should be autodiscovered by SDB */
/* Wishbone RAW Addresses */
#define FMC1_130M_BASE_RAW_ADDR 0x00320000
#define FMC1_130M_CTRL_RAW_REGS (FMC1_130M_BASE_RAW_ADDR + \
FMC_130M_CTRL_RAW_REGS_OFFS)
#define FMC1_130M_FMC_ADC_COMMON_RAW_REGS (FMC1_130M_BASE_RAW_ADDR + \
FMC_130M_FMC_ADC_COMMON_RAW_REGS_OFFS)
#define FMC1_130M_FMC_ACTIVE_CLK_RAW (FMC1_130M_BASE_RAW_ADDR + \
FMC_130M_FMC_ACTIVE_CLK_RAW_OFFS)
#define FMC1_130M_EEPROM_RAW_I2C (FMC1_130M_BASE_RAW_ADDR + \
FMC_130M_EEPROM_RAW_I2C_OFFS)
#define FMC1_130M_LM75A_RAW_I2C (FMC1_130M_BASE_RAW_ADDR + \
FMC_130M_LM75A_RAW_I2C_OFFS)
#define FMC1_250M_BASE_RAW_ADDR 0x00320000
#define FMC1_250M_CTRL_RAW_REGS (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_CTRL_RAW_REGS_OFFS)
#define FMC1_250M_FMC_ADC_COMMON_RAW_REGS (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_FMC_ADC_COMMON_RAW_REGS_OFFS)
#define FMC1_250M_FMC_ACTIVE_CLK_RAW (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_FMC_ACTIVE_CLK_RAW_OFFS)
#define FMC1_250M_EEPROM_RAW_I2C (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_EEPROM_RAW_I2C_OFFS)
#define FMC1_250M_AMC7823_RAW_SPI (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_AMC7823_RAW_SPI_OFFS)
#define FMC1_250M_ISLA216P_RAW_SPI (FMC1_250M_BASE_RAW_ADDR + \
FMC_250M_ISLA216P_RAW_SPI_OFFS)
#define DSP1_BASE_RAW_ADDR 0x00310000
#define DSP1_CTRL_RAW_REGS (DSP1_BASE_RAW_ADDR + \
DSP_CTRL_RAW_REGS_OFFS)
#define DSP1_BPM_RAW_SWAP (DSP1_BASE_RAW_ADDR + \
DSP_BPM_RAW_SWAP_OFFS)
#define WB_ACQ1_BASE_RAW_ADDR 0x00330000
#define FMC2_130M_BASE_RAW_ADDR 0x00350000
#define FMC2_130M_CTRL_RAW_REGS (FMC2_130M_BASE_RAW_ADDR + \
FMC_130M_CTRL_RAW_REGS_OFFS)
#define FMC2_130M_FMC_ADC_COMMON_RAW_REGS (FMC2_130M_BASE_RAW_ADDR + \
FMC_130M_FMC_ADC_COMMON_RAW_REGS_OFFS)
#define FMC2_130M_FMC_ACTIVE_CLK_RAW (FMC2_130M_BASE_RAW_ADDR + \
FMC_130M_FMC_ACTIVE_CLK_RAW_OFFS)
#define FMC2_130M_EEPROM_RAW_I2C (FMC2_130M_BASE_RAW_ADDR + \
FMC_130M_EEPROM_RAW_I2C_OFFS)
#define FMC2_130M_LM75A_RAW_I2C (FMC2_130M_BASE_RAW_ADDR + \
FMC_130M_LM75A_RAW_I2C_OFFS)
#define FMC2_250M_BASE_RAW_ADDR 0x00350000
#define FMC2_250M_CTRL_RAW_REGS (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_CTRL_RAW_REGS_OFFS)
#define FMC2_250M_FMC_ADC_COMMON_RAW_REGS (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_FMC_ADC_COMMON_RAW_REGS_OFFS)
#define FMC2_250M_FMC_ACTIVE_CLK_RAW (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_FMC_ACTIVE_CLK_RAW_OFFS)
#define FMC2_250M_EEPROM_RAW_I2C (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_EEPROM_RAW_I2C_OFFS)
#define FMC2_250M_AMC7823_RAW_SPI (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_AMC7823_RAW_SPI_OFFS)
#define FMC2_250M_ISLA216P_RAW_SPI (FMC2_250M_BASE_RAW_ADDR + \
FMC_250M_ISLA216P_RAW_SPI_OFFS)
#define DSP2_BASE_RAW_ADDR 0x00340000
#define DSP2_CTRL_RAW_REGS (DSP2_BASE_RAW_ADDR + \
DSP_CTRL_RAW_REGS_OFFS)
#define DSP2_BPM_RAW_SWAP (DSP2_BASE_RAW_ADDR + \
DSP_BPM_RAW_SWAP_OFFS)
#define WB_ACQ2_BASE_RAW_ADDR 0x00360000
#define WB_PERIPH_RAW_ADDR 0x00370000
#define WB_AFC_DIAG_RAW_ADDR 0x00380000
#define WB_AFC_DIAG_CTRL_RAW_REGS (WB_AFC_DIAG_RAW_ADDR + \
WB_AFC_DIAG_CTRL_RAW_REGS_OFFS)
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
/* Large Memory RAW Addresses. It lives at address 0 */
#define LARGE_MEM_RAW_ADDR 0x00000000
/* The following is a bit of a hack.
* We employ a generic API for talking to the hardware.
* So, our transport layer (PCIe or Ethernet, for now)
* should be invisible to the SMIO instances.
*
* However, PCI devices generally employ multiple BAR
* registers mapped to different parts of the device.
* For instance, in the bpm-gw FPGA firmware, the PCIe
* core has 3 BARs (BAR0, BAR2 and BAR4) mapped to the
* following:
*
* BAR0 -> PCIe control registers
* BAR2 -> DDR3 SDRAM
* BAR4 -> Wishbone (necessary to use pages mechanism)
*
* So, we define our addresses as the logic address plus
* the BAR number. With this, the PCIe transport layer
* can differentiate between multiple bars and select
* the correct one to read or write
*/
/* Wishbone Addresses */
#define FMC1_130M_BASE_ADDR (BAR4_ADDR | FMC1_130M_BASE_RAW_ADDR)
#define FMC1_130M_CTRL_REGS (BAR4_ADDR | FMC1_130M_CTRL_RAW_REGS)
#define FMC1_130M_FMC_ADC_COMMON (BAR4_ADDR | FMC1_130M_FMC_ADC_COMMON_RAW_REGS)
#define FMC1_130M_FMC_ACTIVE_CLK (BAR4_ADDR | FMC1_130M_FMC_ACTIVE_CLK_RAW)
#define FMC1_130M_EEPROM_I2C (BAR4_ADDR | FMC1_130M_EEPROM_RAW_I2C)
#define FMC1_130M_LM75A_I2C (BAR4_ADDR | FMC1_130M_LM75A_RAW_I2C)
#define FMC1_250M_BASE_ADDR (BAR4_ADDR | FMC1_250M_BASE_RAW_ADDR)
#define FMC1_250M_CTRL_REGS (BAR4_ADDR | FMC1_250M_CTRL_RAW_REGS)
#define FMC1_250M_FMC_ADC_COMMON (BAR4_ADDR | FMC1_250M_FMC_ADC_COMMON_RAW_REGS)
#define FMC1_250M_FMC_ACTIVE_CLK (BAR4_ADDR | FMC1_250M_FMC_ACTIVE_CLK_RAW)
#define FMC1_250M_EEPROM_I2C (BAR4_ADDR | FMC1_250M_EEPROM_RAW_I2C)
#define FMC1_250M_AMC7823_SPI (BAR4_ADDR | FMC1_250M_AMC7823_RAW_SPI)
#define FMC1_250M_ISLA216P_SPI (BAR4_ADDR | FMC1_250M_ISLA216P_RAW_SPI)
#define DSP1_BASE_ADDR (BAR4_ADDR | DSP1_BASE_RAW_ADDR)
#define DSP1_CTRL_REGS (BAR4_ADDR | DSP1_CTRL_RAW_REGS)
#define DSP1_BPM_SWAP (BAR4_ADDR | DSP1_BPM_RAW_SWAP)
#define WB_ACQ1_BASE_ADDR (BAR4_ADDR | WB_ACQ1_BASE_RAW_ADDR)
#define FMC2_130M_BASE_ADDR (BAR4_ADDR | FMC2_130M_BASE_RAW_ADDR)
#define FMC2_130M_CTRL_REGS (BAR4_ADDR | FMC2_130M_CTRL_RAW_REGS)
#define FMC2_130M_FMC_ADC_COMMON (BAR4_ADDR | FMC2_130M_FMC_ADC_COMMON_RAW_REGS)
#define FMC2_130M_FMC_ACTIVE_CLK (BAR4_ADDR | FMC2_130M_FMC_ACTIVE_CLK_RAW)
#define FMC2_130M_EEPROM_I2C (BAR4_ADDR | FMC2_130M_EEPROM_RAW_I2C)
#define FMC2_130M_LM75A_I2C (BAR4_ADDR | FMC2_130M_LM75A_RAW_I2C)
#define FMC2_250M_BASE_ADDR (BAR4_ADDR | FMC2_250M_BASE_RAW_ADDR)
#define FMC2_250M_CTRL_REGS (BAR4_ADDR | FMC2_250M_CTRL_RAW_REGS)
#define FMC2_250M_FMC_ADC_COMMON (BAR4_ADDR | FMC2_250M_FMC_ADC_COMMON_RAW_REGS)
#define FMC2_250M_FMC_ACTIVE_CLK (BAR4_ADDR | FMC2_250M_FMC_ACTIVE_CLK_RAW)
#define FMC2_250M_EEPROM_I2C (BAR4_ADDR | FMC2_250M_EEPROM_RAW_I2C)
#define FMC2_250M_AMC7823_SPI (BAR4_ADDR | FMC2_250M_AMC7823_RAW_SPI)
#define FMC2_250M_ISLA216P_SPI (BAR4_ADDR | FMC2_250M_ISLA216P_RAW_SPI)
#define DSP2_BASE_ADDR (BAR4_ADDR | DSP2_BASE_RAW_ADDR)
#define DSP2_CTRL_REGS (BAR4_ADDR | DSP2_CTRL_RAW_REGS)
#define DSP2_BPM_SWAP (BAR4_ADDR | DSP2_BPM_RAW_SWAP)
#define WB_ACQ2_BASE_ADDR (BAR4_ADDR | WB_ACQ2_BASE_RAW_ADDR)
#define WB_PERIPH_BASE_ADDR (BAR4_ADDR | WB_PERIPH_RAW_ADDR)
#define WB_AFC_DIAG_BASE_ADDR (BAR4_ADDR | WB_AFC_DIAG_RAW_ADDR)
#define WB_AFC_DIAG_CTRL_REGS (BAR4_ADDR | WB_AFC_DIAG_CTRL_RAW_REGS)
/************************* AFCv3 Gateware Options *************************/
/********************* FMC130M_4CH SMIO Gateware Options ******************/
/* Chip SPI slave select lines and I2C address */
#define NUM_FMC130M_4CH_LM75A 2
extern const uint32_t fmc130m_4ch_si571_addr[NUM_FMC130M_4CH_SMIOS];
extern const uint32_t fmc130m_4ch_ad9510_addr[NUM_FMC130M_4CH_SMIOS];
extern const uint32_t fmc130m_4ch_24aa64_addr[NUM_FMC130M_4CH_SMIOS];
extern const uint32_t fmc130m_4ch_lm75a_addr[NUM_FMC130M_4CH_SMIOS][NUM_FMC130M_4CH_LM75A];
extern const uint32_t fmc130m_4ch_pca9547_addr[NUM_FMC130M_4CH_SMIOS];
/********************* FMC250M_4CH SMIO Gateware Options ******************/
/* Chip SPI slave select lines and I2C address */
#define NUM_FMC250M_4CH_ISLA216P 4
extern const uint32_t fmc250m_4ch_amc7823_addr[NUM_FMC250M_4CH_SMIOS];
extern const uint32_t fmc250m_4ch_isla216p_addr[NUM_FMC250M_4CH_SMIOS][NUM_FMC250M_4CH_ISLA216P];
extern const uint32_t fmc250m_4ch_ad9510_addr[NUM_FMC250M_4CH_SMIOS];
extern const uint32_t fmc250m_4ch_si571_addr[NUM_FMC250M_4CH_SMIOS];
extern const uint32_t fmc250m_4ch_24aa64_addr[NUM_FMC250M_4CH_SMIOS];
extern const uint32_t fmc250m_4ch_pca9547_addr[NUM_FMC250M_4CH_SMIOS];
/*********************** SMIO ACQ Gateware Options ***********************/
/* FIXME: The Gateware does not support yet a way of reading which
* ACQ channels are valid. So, we hardcoded it here for now. This issue
* should be addressed soon */
/* We define 10 Channels: ADC 1, TBT AMP 1, TBT POS 1, FOFB AMP 1, FOFB POS 1,
* ADC 2, TBT AMP 2, TBT POS 2, FOFB AMP 2, FOFB POS 2 */
#define SMIO_ACQ_NUM_CHANNELS END_CHAN_ID
#endif