Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The apply_dot-config script was wrong: it wouldn't force on the
empty root password. Thus, if it is set to something non-empty
and then changed (by a network dot-config) to empty, it won't work.

This bug only revealed on nfs-root setups.

Now, it's stupid to keep two symbols (ROOT_PWD_CLEAR and ROOT_PWD_CYPHER),
and I could simplify the script. And re-test. And change docs. No thanks.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

lm32-vuart was destroying the tty it was run into. And ctrl-C was
not working (the initial message "press ctrl-A" was not really
visible).

This removes part of the cruft of the program. It also adds a little
delay when no bytes are there to read from FPGA to releaf a little
the load on the ARM CPU.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

I already fixed that, but likely I made an error in "git rebase -i" before
pushing to master.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

New CSS style for sfpcalibration.php and endpointcalibration.php and
management.php to make it fit in the layout for both Firefox and Chrome
for both Windows and Linux.

Blank spaces and lines have been removed.
Now in management.php users can modify DOT_CONFIG_URL
A warning message when uploading or adding URL dotconfig is now shown.

In case dotconfig file has been modified by other users, the web
interface shows an alert, reloads dotconfig and the data structure.

WR-PPSi now supports GrandMaster, Boundary Clock and FreeRunning modes
using dotconfig.
NTP server is now in PPSi configuration. When users try to set a NTP
server in BC mode, there is an alert message because of the WR timing
override.
Help messages have been changed for management.php and ptp.php because
of these changes.
When the user tries to save changes and dotconfig file was modified by
other user, the data structure must be reloaded (changes are not done)

WRS mode and NTP server will be part of WR-PPSi section.

Because of the NTP configuration, PPSI Setup section is now WR-PTP Setup

There was a display error when Vendor Serial(VS) was the first value and
there was no Vendor Name (VN)
When an entermediate element from the SFP list was deleted, that space
was never used anymore.
When there is no more space an alarm message is now shown.

Add and delete icons added instead of plain text.
Form view has also been improved

Network configuration changes now displays an alert message (changed
also in CSS file in previous commit)

dotconfig backup includes now serial number of the wrs.
help message does not display all info in bold...
COmmand to get monitor status improved: it looks for the last field,
which is the always the status.

Form name fields for aux clock does not display now "aux.clock" for all
of them since this is not necessary.

Users can now go from the endpoint mode selection screen to the advanced
one to change endpoint's protocol, fiber, tx, rx, etc...

Changing aux clk2 configuration for wrs 3.4 does not reboot the wrs. Not
the service is restarting from /etc/init.d/wrs_auxclk.

network.php now supports no info from dotconfig, displayed as "DHCP". In
addition, after any change the WRS does not reboot and a message says
that reboot is necessary to perform changes.

system monitor can be now enabled or disabled from web interface in
management.php page.

Users could login using a substring of the username instead of the full
name. It is now fixed.

sfpcalibration.php can now add new sfp data, modify and remove using
dotconfig file.

If any data structure includes also a "help" column, this is displayed
as a "title" message when the cursor is over the form cell.

These values are now read and saved in ppsi-pre.conf since ppsi.conf is
now regenerated after everyboot.

When watchdog, monitor or snmpd system logs are not present in dotconfig
but the user wants to use them, they are now added in dotconfig file.

Network setup now uses dotconfig file instead of
/etc/network/interfaces. It supports now DHCP Only, DHCP Once and Static
IP.
After any change in the network configuration the WRS reboots. This
shall be changed when the proper script performs this action properly.
In functions.php, checking, adding and deleting "pairs" in dotconfig
have been developed to make it easier for the configuration of different
services.
Dotconfig backup file includes the current date of the backup file.

New and improved help messages have been added.

Aux Clock2 can be only used in 3.4 switches, so menu.php will only
display this feature in these new switches.

Adding blank space to HARDWARE string for SCB and BLACKPLANE.
Smaller size for endpointcalibration.php to make table fit better in
layout.
HTML charset is now utf-8 no avoid issues with special simbols.

after removing footer.png from the img/ folder (no longer needed), we
got a 404 error and also a display issue in footer. Now fixed.

Renaming CONFIG_WRS_LOG_SNMP to CONFIG_WRS_LOG_SNMPD in data structure.

sfpcalibration shows the sfp database from dotconfig. At this moment, it
only displays.

Log files for WRS_WATCHDOG, SNMP and MONIT have been added to the data
structure.

management.php now offers the possibility to enable or disable the
monitor system of the switch.

Updating the firmware from the web interface was not working because
php.ini file did not allow users to upload files bigger than 8MB.
The interface now updates this values (POST_MAX and PHP_MAX) to 30MB to
make uploading the new firmware to the WRS.