Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds the Kconfig mechanism and the pfilter rules.

The latency test socket transmists frames of a specific ether type;
the receiver must receive all such frames.  To minimize the load on the
packet filter, this adds a single rule: we already accept all PTPv2
frames, so we now "OR" to this the new ethernet type.   If the feature
is configured off, the rule uses the same PTPv2 ethertye, thus
turning in practice into a NOP.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is used by the latency measurement, to send high-priority frames
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

One rule only!
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This shortens the rule-set by one rule, making space for pdelay.

IP is acceptable whether unicast or broadcast. Thus, remove the IP_UNI
intermediate calculation and use only IP_OK.

Most of the lines in this commit are a renaming of FRAME_OUR_MAC to
FRAME_MAC_OK, with no real effect, because we'll coalesce all valid
macs in a single bit (I planned to use it in this commit, but I did
not, still I don't want to split the patch).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This shortens the rule-set by one rule, making space for pdelay.

There is no need to use a temporary register once FOR_CPU is done.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is a safe measure before adding UDP support, which adds a socket.
And we have other ongoing net-related activities too, so I'd better
spend 16 bytes now and feel safer.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is needed to build ppsi on the host with arch-wrpc, that
I'm using to developer udp on ppsi::wrpc-sw
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Trigger start/stop of PTP from wrc_check_link job instead of PTP's job.
This picks ppsi's new master that matches the change.

We need to remove prototype for an unused function, now that the one
in ppsi changed arguments and we'd otherwise get

  error: conflicting types for 'wr_servo_reset'
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
Signed-off-by: Alessandro Rubini <a.rubini@gsi.de>

Although we love to build-test stuff and discard at link time, as soon
as we move tasks to be sections, we need to avoid building the file of
the task if not configured in.  This means lib/arp.c and lib/ipv4.c.

But, for consistency, avoid building icmp.c and bootp.c as well.
The alternative, which is ifconfig'ing the task itself results in
warnings like "'ipv4_init' defined but not used".
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This allows several functions to be static in the files where they
are defined. See temperature.c for an example.

But mainly, the idea is allowing ease addition of features (likely
Kconfig'd ones) for specific WR users, without any modification to the
main function and other generic code.  This will happen soon for snmp,
for example.

We may push this a little further, by moving all shell stuff into
shell.c, the ptp task within ppsi itself, and so on. But now my time
is over.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Socket matching depended on the order or sockets. With the new ELF
section (next commit) we get the ICMP socket before some UDP ones, so
the code matched IPV4 and the UDP service did not get the data.

Now we give priority to UDP sockets. So this commit
fixes the problem beforehand.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The threshold and the repeat interval is set by Kconfig.
The temperatures are read using the temperature framework.

Tested in host environment:

   wrc# faketemp 90 80 10
   wrc# faketemp 90 40 20
   wrc# faketemp 20 30 40

   Jan  1 10:32:09 192.168.16.7 Temperature high: \
                                  roof:90.0000 core:80.0000 case:10.0000
   Jan  1 10:33:09 192.168.16.7 Temperature high: \
                                  roof:90.0000 core:40.0000 case:20.0000
   Jan  1 10:33:18 192.168.16.7 Temperature ok: \
                                  roof:20.0000 core:30.0000 case:40.0000
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This shortens the rule-set by two rules, making space for pdelay.

By accepting all ports from 0 to 511, we get all of our services,
including snmp that will be tested soon.  This relaxed check will give
us possibly some false positives (then discarded by the CPU) while
still protecting from most of an hostile or just probing  port sweep.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The configuration is not called *_defconfig, because we can't just
build it in ./MAKEALL -- we need ppsi to be built with a different
configuration, and this is not autodetected yet (but building from a fresh
clone works).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit is not breaking the current status, but adds the
ability to build on the host, to simulate and (mainly) to help
me hack the networking code in a simpler/faster environment.

Missing features:
	- ptp
	- build in i386 (currently x86-64 is hardwired)

Also, this commit requires a change in ppsi, that I'm not going to
commit now: we must get rid of the main function (most of that
stuff is done win wrc_ptp.c, which we must replicate  in a unix-compatible
way).

This is the ppsi change

   --- a/arch-unix/Makefile
   +++ b/arch-unix/Makefile
   @@ -4,7 +4,7 @@ A := arch-$(ARCH)

    CFLAGS += -Itools

   -OBJ-y += $A/unix-startup.o \
   +OBJ-y += \
           $A/main-loop.o \
           $A/unix-io.o \
           $A/unix-conf.o \

Local changes in this commit:
      - adding CONFIG_HOST_PROCESS and the auto-generated opposites:
      CONFIG_LM32 and CONFIG_EMBEDDED_NODE (LM32 && NODE)

      - make some config option depend on !HOST_PROCESS

      - Makefile: some dependencies on HOST_PROCESS and the opposite

      - */*.mk: some dev and shell objects depend on
      CONFIG_EMBEDDED_NODE instead of CONFIG_WR_NODE (i.e.: both a
      node and an lm32)

      - new host/ subdir where some placeholders are placed

      - no sdb support on the host
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This, again, is preliminary to host builds, and has no effect.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

These changes have no effect at this point, but are the initial steps
introducing host builds. Some changes are minor cleanups, some depend
on CONFIG_HOST_PROCESS which is not defined at this point.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>