Skip to content

S
Software for White Rabbit PTP Core
Commit 84ebc48c authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

general: remove references to ptp-noposix 

Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 35e279ee
Hide whitespace changes
Inline Side-by-side
Showing with 6 additions and 329 deletions
Kconfig
View file @ 84ebc48c
......@@ -165,21 +165,10 @@ config PRINTF_NONE
but not suited for wrpc-sw. See pp_printf/README for details.
endchoice
choice
prompt "Choose your preferred ptp engine"
depends on DEVELOPER
config PPSI
boolean "ppsi"
help
Select this option for the ppsi engine
config PTP_NOPOSIX
boolean "ptp-noposix"
boolean
help
Select this option for the ptp-noposix engine
endchoice
Select this option for the ppsi engine (now only option)
config DETERMINISTIC_BINARY
depends on DEVELOPER
......
Makefile
View file @ 84ebc48c
......@@ -13,7 +13,6 @@ SIZE = $(CROSS_COMPILE)size
AUTOCONF = $(CURDIR)/include/generated/autoconf.h
PTP_NOPOSIX = ptp-noposix
PPSI = ppsi
# we miss CONFIG_ARCH_LM32 as we have no other archs by now
......@@ -34,35 +33,6 @@ cflags-y = -ffreestanding -include $(AUTOCONF) -Iinclude/std -Iinclude \
-I. -Isoftpll -Iipc
cflags-y += -I$(CURDIR)/pp_printf
cflags-$(CONFIG_PTP_NOPOSIX) += \
-DPTPD_FREESTANDING \
-DWRPC_EXTRA_SLIM \
-DPTPD_MSBF \
-DPTPD_DBG \
-DPTPD_NO_DAEMON \
-DNEW_SINGLE_WRFSM \
-DPTPD_TRACE_MASK=0 \
-include $(PTP_NOPOSIX)/compat.h \
-include $(PTP_NOPOSIX)/PTPWRd/dep/trace.h \
-include $(PTP_NOPOSIX)/libposix/ptpd-wrappers.h \
-I$(PTP_NOPOSIX)/libptpnetif \
-I$(PTP_NOPOSIX)/PTPWRd
obj-$(CONFIG_PTP_NOPOSIX) += wrc_ptp_noposix.o \
monitor/monitor.o \
lib/ptp-noposix-wrappers.o \
$(PTP_NOPOSIX)/PTPWRd/arith.o \
$(PTP_NOPOSIX)/PTPWRd/bmc.o \
$(PTP_NOPOSIX)/PTPWRd/dep/msg.o \
$(PTP_NOPOSIX)/PTPWRd/dep/net.o \
$(PTP_NOPOSIX)/PTPWRd/dep/sys.o \
$(PTP_NOPOSIX)/PTPWRd/dep/timer.o \
$(PTP_NOPOSIX)/PTPWRd/dep/wr_servo.o \
$(PTP_NOPOSIX)/PTPWRd/dep/servo.o \
$(PTP_NOPOSIX)/PTPWRd/protocol.o \
$(PTP_NOPOSIX)/PTPWRd/wr_protocol.o \
$(PTP_NOPOSIX)/libposix/freestanding-startup.o
cflags-$(CONFIG_PPSI) += \
-ffreestanding \
-include include/ppsi-wrappers.h \
......@@ -179,8 +149,7 @@ tools:
# if needed, check out the submodules (first time only), so users
# who didn't read carefully the manual won't get confused
gitmodules:
@test -d ptp-noposix/libposix || echo "Checking out submodules"
@test -d ptp-noposix/libposix || git submodule update --init
@test -d ppsi/arch-wrpc || echo "Checking out submodules"
@test -d ppsi/arch-wrpc || git submodule update --init
......
arch/lm32/ram.ld.S
View file @ 84ebc48c
......@@ -66,5 +66,5 @@ SECTIONS
PROVIDE(_fstack = ORIGIN(stack) + LENGTH(stack) - 4);
}
/* We need to provide mprintf to ptp-noposix object files, if missing */
/* We need to provide mprintf to developers with old habits, if missing */
PROVIDE(mprintf = pp_printf);
check-error.c
View file @ 84ebc48c
......@@ -9,7 +9,6 @@
extern void __you_should_not_call_printf_from_wrpc_sw(void);
extern void __you_should_not_divide_ll_in_wrpc_sw(void);
#undef printf /* Under ptp-noposix, this is #defined to mprintf */
int printf(const char *fmt, ...)
{
__you_should_not_call_printf_from_wrpc_sw();
......
configs/spec_noposix_defconfig deleted 100644 → 0
View file @ 35e279ee
#
# Automatically generated make config: don't edit
#
# CONFIG_WR_SWITCH is not set
CONFIG_WR_NODE=y
CONFIG_PRINT_BUFSIZE=128
CONFIG_PRINTF_XINT=y
CONFIG_RAMSIZE=90112
CONFIG_STACKSIZE=2048
# CONFIG_PPSI is not set
CONFIG_UART=y
CONFIG_W1=y
# CONFIG_ETHERBONE is not set
# CONFIG_CMD_CONFIG is not set
#
# wrpc-sw is tainted if you change the following options
#
CONFIG_DEVELOPER=y
# CONFIG_CHECK_RESET is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_PRINTF_MINI is not set
# CONFIG_PRINTF_NONE is not set
CONFIG_PTP_NOPOSIX=y
# CONFIG_DETERMINISTIC_BINARY is not set
# CONFIG_UART_SW is not set
# CONFIG_SDB_EEPROM is not set
CONFIG_LEGACY_EEPROM=y
include/ppsi-wrappers.h
View file @ 84ebc48c
/*
* This includes stuff that is needed to link ppsi into wrpc-sw
*
* It is included by the command line (-include) like ptp-noposix's
* ptpd-wrappers.h is. It is a subset of that file, with only needed stuff
* It is included by the command line (-include).
* It is a subset of the older "ptpd-wrappers.h", in ptp-noposix
*/
#include <sys/types.h>
#include <stdlib.h>
......
monitor/monitor.c deleted 100644 → 0
View file @ 35e279ee
/*
* This work is part of the White Rabbit project
*
* Copyright (C) 2011,2012 CERN (www.cern.ch)
* Author: Tomasz Wlostowski <tomasz.wlostowski@cern.ch>
*
* Released according to the GNU GPL, version 2 or any later version.
*/
#include <stdio.h>
#include <time.h>
#include <wrc.h>
#include <w1.h>
#include "board.h"
#include "ptpd_exports.h"
#include "hal_exports.h"
#include "softpll_ng.h"
#include "minic.h"
#include "pps_gen.h"
#include "util.h"
#include "syscon.h"
#include "onewire.h"
#include "lib/ipv4.h"
#define PRINT64_FACTOR 1000000000
char* print64(unsigned long long x)
{
uint32_t h_half, l_half;
static char buf[2*10+1]; //2x 32-bit value + \0
if (x < PRINT64_FACTOR)
sprintf(buf, "%u", (uint32_t)x);
else{
h_half = (uint32_t)(x/PRINT64_FACTOR);
l_half = (uint32_t)(x-h_half*PRINT64_FACTOR);
sprintf(buf, "%u%u", h_half, l_half);
}
return buf;
}
extern ptpdexp_sync_state_t cur_servo_state;
extern int wrc_man_phase;
void wrc_mon_gui(void)
{
static uint32_t last;
hexp_port_state_t ps;
int tx, rx;
uint64_t sec;
uint32_t nsec;
#ifdef CONFIG_ETHERBONE
uint8_t ip[4];
#endif
if (!last)
last = timer_get_tics();
if (time_before(timer_get_tics(), last + wrc_ui_refperiod))
return;
last = timer_get_tics();
term_clear();
pcprintf(1, 1, C_BLUE, "WR PTP Core Sync Monitor v 1.0");
pcprintf(2, 1, C_GREY, "Esc = exit");
shw_pps_gen_get_time(&sec, &nsec);
cprintf(C_BLUE, "\n\nTAI Time: ");
cprintf(C_WHITE, "%s", format_time(sec));
/*show_ports */
halexp_get_port_state(&ps, NULL);
pcprintf(4, 1, C_BLUE, "\n\nLink status:");
pcprintf(6, 1, C_WHITE, "%s: ", "wru1");
if (ps.up)
cprintf(C_GREEN, "Link up ");
else
cprintf(C_RED, "Link down ");
if (ps.up) {
minic_get_stats(&tx, &rx);
cprintf(C_GREY, "(RX: %d, TX: %d), mode: ", rx, tx);
switch (ps.mode) {
case HEXP_PORT_MODE_WR_MASTER:
cprintf(C_WHITE, "WR Master ");
break;
case HEXP_PORT_MODE_WR_SLAVE:
cprintf(C_WHITE, "WR Slave ");
break;
}
if (ps.is_locked)
cprintf(C_GREEN, "Locked ");
else
cprintf(C_RED, "NoLock ");
if (ps.rx_calibrated && ps.tx_calibrated)
cprintf(C_GREEN, "Calibrated ");
else
cprintf(C_RED, "Uncalibrated ");
#ifdef CONFIG_ETHERBONE
cprintf(C_WHITE, "\nIPv4: ");
getIP(ip);
if (needIP)
cprintf(C_RED, "BOOTP running");
else
cprintf(C_GREEN, "%d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
#endif
/* show_servo */
cprintf(C_BLUE, "\n\nSynchronization status:\n\n");
if (!cur_servo_state.valid) {
cprintf(C_RED,
"Master mode or sync info not valid\n\n");
return;
}
cprintf(C_GREY, "Servo state: ");
cprintf(C_WHITE, "%s\n", cur_servo_state.slave_servo_state);
cprintf(C_GREY, "Phase tracking: ");
if (cur_servo_state.tracking_enabled)
cprintf(C_GREEN, "ON\n");
else
cprintf(C_RED, "OFF\n");
cprintf(C_GREY, "Synchronization source: ");
cprintf(C_WHITE, "%s\n", cur_servo_state.sync_source);
cprintf(C_GREY, "Aux clock status: ");
int n_ref, n_out, i;
spll_get_num_channels(&n_ref, &n_out);
for(i = 0; i<n_out - 1; i++)
{
const char *aux_stat = spll_get_aux_status_string(i);
cprintf(C_GREY,"%d:", i);
cprintf(C_GREEN,"%s ", aux_stat);
}
mprintf("\n");
cprintf(C_BLUE, "\nTiming parameters:\n\n");
cprintf(C_GREY, "Round-trip time (mu): ");
cprintf(C_WHITE, "%s ps\n", print64(cur_servo_state.mu));
cprintf(C_GREY, "Master-slave delay: ");
cprintf(C_WHITE, "%s ps\n", print64(cur_servo_state.delay_ms));
cprintf(C_GREY, "Master PHY delays: ");
cprintf(C_WHITE, "TX: %d ps, RX: %d ps\n",
(int32_t) cur_servo_state.delta_tx_m,
(int32_t) cur_servo_state.delta_rx_m);
cprintf(C_GREY, "Slave PHY delays: ");
cprintf(C_WHITE, "TX: %d ps, RX: %d ps\n",
(int32_t) cur_servo_state.delta_tx_s,
(int32_t) cur_servo_state.delta_rx_s);
cprintf(C_GREY, "Total link asymmetry: ");
cprintf(C_WHITE, "%9d ps\n",
(int32_t) (cur_servo_state.total_asymmetry));
cprintf(C_GREY, "Cable rtt delay: ");
cprintf(C_WHITE, "%9s ps\n", print64(cur_servo_state.mu -
cur_servo_state.delta_tx_m -
cur_servo_state.delta_rx_m -
cur_servo_state.delta_tx_s -
cur_servo_state.delta_rx_s));
cprintf(C_GREY, "Clock offset: ");
cprintf(C_WHITE, "%9d ps\n",
(int32_t) (cur_servo_state.cur_offset));
cprintf(C_GREY, "Phase setpoint: ");
cprintf(C_WHITE, "%9d ps\n",
(int32_t) (cur_servo_state.cur_setpoint));
cprintf(C_GREY, "Skew: ");
cprintf(C_WHITE, "%9d ps\n",
(int32_t) (cur_servo_state.cur_skew));
cprintf(C_GREY, "Manual phase adjustment: ");
cprintf(C_WHITE, "%9d ps\n", (int32_t) (wrc_man_phase));
cprintf(C_GREY, "Update counter: ");
cprintf(C_WHITE, "%9d \n",
(int32_t) (cur_servo_state.update_count));
}
cprintf(C_GREY, "--");
return;
}
int wrc_log_stats(uint8_t onetime)
{
static uint32_t last;
hexp_port_state_t ps;
int tx, rx;
int aux_stat;
uint64_t sec;
uint32_t nsec;
if (!last)
last = timer_get_tics();
if (!onetime && time_before(timer_get_tics(), last + wrc_ui_refperiod))
return 0;
last = timer_get_tics();
shw_pps_gen_get_time(&sec, &nsec);
halexp_get_port_state(&ps, NULL);
minic_get_stats(&tx, &rx);
mprintf("lnk:%d rx:%d tx:%d ", ps.up, rx, tx);
mprintf("lock:%d ", ps.is_locked ? 1 : 0);
mprintf("sv:%d ", cur_servo_state.valid ? 1 : 0);
mprintf("ss:'%s' ", cur_servo_state.slave_servo_state);
aux_stat = spll_get_aux_status(0);
mprintf("aux:%x ", aux_stat);
mprintf("sec:%d nsec:%d ", (uint32_t) sec, nsec); /* fixme: clock is not always 125 MHz */
mprintf("mu:%s ", print64(cur_servo_state.mu));
mprintf("dms:%s ", print64(cur_servo_state.delay_ms));
mprintf("dtxm:%d drxm:%d ", (int32_t) cur_servo_state.delta_tx_m,
(int32_t) cur_servo_state.delta_rx_m);
mprintf("dtxs:%d drxs:%d ", (int32_t) cur_servo_state.delta_tx_s,
(int32_t) cur_servo_state.delta_rx_s);
mprintf("asym:%d ", (int32_t) (cur_servo_state.total_asymmetry));
mprintf("crtt:%s ", print64(cur_servo_state.mu -
cur_servo_state.delta_tx_m -
cur_servo_state.delta_rx_m -
cur_servo_state.delta_tx_s -
cur_servo_state.delta_rx_s));
mprintf("cko:%d ", (int32_t) (cur_servo_state.cur_offset));
mprintf("setp:%d ", (int32_t) (cur_servo_state.cur_setpoint));
mprintf("hd:%d md:%d ad:%d ", spll_get_dac(-1), spll_get_dac(0),
spll_get_dac(1));
mprintf("ucnt:%d ", (int32_t) cur_servo_state.update_count);
if (1) {
int32_t temp;
//first read the value from previous measurement,
//first one will be random, I know
temp = w1_read_temp_bus(&wrpc_w1_bus, W1_FLAG_COLLECT);
//then initiate new conversion for next loop cycle
w1_read_temp_bus(&wrpc_w1_bus, W1_FLAG_NOWAIT);
mprintf("temp: %d.%04d C", temp >> 16,
(int)((temp & 0xffff) * 10 * 1000 >> 16));
}
mprintf("\n");
return 0;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment