Skip to content

S
Software for White Rabbit PTP Core
Commit 0945f15b authored by Tristan Gingold's avatar Tristan Gingold
Browse files
Options

Remove duplicated configs

parent dbb073c2
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 272 deletions
configs/spec_riscv_defconfig deleted 100644 → 0
View file @ dbb073c2
#
# Automatically generated file; DO NOT EDIT.
# WR PTP Core software configuration
#
# CONFIG_ARCH_LM32 is not set
CONFIG_ARCH_RISCV=y
# CONFIG_RISCV_COMP_INSTR is not set
CONFIG_TARGET_GENERIC_PHY_8BIT=y
# CONFIG_TARGET_GENERIC_PHY_16BIT is not set
# CONFIG_TARGET_WR_SWITCH is not set
# CONFIG_TARGET_AFCZ is not set
# CONFIG_TARGET_ERTM14 is not set
# CONFIG_TARGET_SIS8300KU is not set
# CONFIG_TARGET_PXIE_FMC is not set
CONFIG_WR_NODE=y
CONFIG_STACKSIZE=2048
CONFIG_PRINT_BUFSIZE=256
CONFIG_RAMSIZE=196608
CONFIG_TEMP_POLL_INTERVAL=15
CONFIG_TEMP_HIGH_THRESHOLD=70
CONFIG_TEMP_HIGH_RAPPEL=60
# CONFIG_PLL_VERBOSE is not set
# CONFIG_WRC_VERBOSE is not set
CONFIG_VLAN=y
CONFIG_VLAN_NR=1
CONFIG_VLAN_1_FOR_CLASS7=10
CONFIG_VLAN_2_FOR_CLASS7=11
CONFIG_VLAN_FOR_CLASS6=20
# CONFIG_HOST_PROCESS is not set
CONFIG_EMBEDDED_NODE=y
CONFIG_WRPC_PPSI=y
CONFIG_LATENCY_ETHTYPE=291
CONFIG_IP=y
# CONFIG_CMD_CONFIG is not set
# CONFIG_SYSLOG is not set
# CONFIG_ETHERBONE is not set
CONFIG_SNMP=y
CONFIG_SNMP_SET=y
CONFIG_SNMP_INIT=y
CONFIG_SNMP_SDB=y
CONFIG_SNMP_CMD=y
CONFIG_SNMP_AUX_DIAG=y
CONFIG_BUILD_INIT=y
CONFIG_INIT_COMMAND="vlan off;ptp stop;sfp match;mode slave;ptp start"
CONFIG_HAS_BUILD_INIT=1
CONFIG_HAS_FLASH_INIT=1
CONFIG_FLASH_INIT=y
CONFIG_AUX_DIAG=y
CONFIG_GENSDBFS=y
CONFIG_WR_DIAG=y
# CONFIG_WR_NODE_SIM is not set
CONFIG_ABSCAL=y
CONFIG_LLDP=y
# CONFIG_CMD_REFRESH is not set
# CONFIG_CMD_PPS is not set
# CONFIG_CMD_SFP_INFO is not set
# CONFIG_SFP_DOM is not set
# CONFIG_CMD_LEAPSEC is not set
# CONFIG_CMD_PTP_ADV is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TEMP_SENSORS is not set
# CONFIG_W1 is not set
# CONFIG_TRACE_MSGS is not set
CONFIG_TRACE_ALL=0
CONFIG_TRACE_MAIN=0
CONFIG_TRACE_STORAGE=0
CONFIG_TRACE_DEVICES=0
CONFIG_TRACE_BOARD=0
CONFIG_TRACE_MAC=0
CONFIG_TRACE_PHY=0
#
# wrpc-sw is tainted if you change the following options
#
CONFIG_DEVELOPER=y
CONFIG_CUSTOM_RAMSIZE=196608
CONFIG_CUSTOM_STACKSIZE=2048
CONFIG_CUSTOM_PRINT_BUFSIZE=256
# CONFIG_CMD_LL is not set
# CONFIG_DAC_LOG is not set
# CONFIG_CHECK_RESET is not set
# CONFIG_SPLL_FIFO_LOG is not set
# CONFIG_PRINTF_IS_XINT is not set
CONFIG_PRINTF_IS_FULL=y
# CONFIG_PRINTF_IS_MINI is not set
# CONFIG_PRINTF_IS_NONE is not set
# CONFIG_ASSERT is not set
# CONFIG_DETERMINISTIC_BINARY is not set
# CONFIG_NET_VERBOSE is not set
# CONFIG_SNMP_VERBOSE is not set
# CONFIG_LATENCY_PROBE is not set
CONFIG_DEFAULT_PRINT_TASK_TIME_THRESHOLD=0
# CONFIG_PRINTF_XINT is not set
CONFIG_PRINTF_FULL=y
# CONFIG_PRINTF_MINI is not set
# CONFIG_PRINTF_NONE is not set
configs/target_afcz_defconfig deleted 100644 → 0
View file @ dbb073c2
#
# Automatically generated file; DO NOT EDIT.
# WR PTP Core software configuration
#
CONFIG_ARCH_LM32=y
# CONFIG_ARCH_RISCV is not set
# CONFIG_TARGET_GENERIC_PHY_8BIT is not set
# CONFIG_TARGET_GENERIC_PHY_16BIT is not set
# CONFIG_TARGET_WR_SWITCH is not set
CONFIG_TARGET_AFCZ=y
# CONFIG_TARGET_ERTM14 is not set
# CONFIG_TARGET_SIS8300KU is not set
# CONFIG_TARGET_PXIE_FMC is not set
CONFIG_WR_NODE=y
CONFIG_STACKSIZE=2048
CONFIG_PRINT_BUFSIZE=128
CONFIG_RAMSIZE=196608
CONFIG_TEMP_POLL_INTERVAL=15
CONFIG_TEMP_HIGH_THRESHOLD=70
CONFIG_TEMP_HIGH_RAPPEL=60
# CONFIG_PLL_VERBOSE is not set
# CONFIG_WRC_VERBOSE is not set
# CONFIG_VLAN is not set
CONFIG_VLAN_NR=0
CONFIG_VLAN_1_FOR_CLASS7=0
CONFIG_VLAN_2_FOR_CLASS7=0
CONFIG_VLAN_FOR_CLASS6=0
# CONFIG_HOST_PROCESS is not set
CONFIG_EMBEDDED_NODE=y
CONFIG_WRPC_PPSI=y
CONFIG_LATENCY_ETHTYPE=291
# CONFIG_IP is not set
# CONFIG_CMD_CONFIG is not set
CONFIG_BUILD_INIT=y
CONFIG_INIT_COMMAND="vlan off;ptp stop;sfp match;mode slave;ptp start"
CONFIG_HAS_BUILD_INIT=1
CONFIG_HAS_FLASH_INIT=1
CONFIG_FLASH_INIT=y
CONFIG_AUX_DIAG=y
CONFIG_GENSDBFS=y
CONFIG_WR_DIAG=y
# CONFIG_WR_NODE_SIM is not set
CONFIG_ABSCAL=y
# CONFIG_LLDP is not set
# CONFIG_CMD_PPS is not set
# CONFIG_CMD_LEAPSEC is not set
CONFIG_TRACE_MSGS=y
# CONFIG_TRACE_ALL_ENABLE is not set
CONFIG_TRACE_MAIN_ENABLE=y
CONFIG_TRACE_STORAGE_ENABLE=y
CONFIG_TRACE_DEVICES_ENABLE=y
CONFIG_TRACE_BOARD_ENABLE=y
# CONFIG_TRACE_MAC_ENABLE is not set
CONFIG_TRACE_PHY_ENABLE=y
CONFIG_TRACE_ALL=0
CONFIG_TRACE_MAIN=1
CONFIG_TRACE_STORAGE=1
CONFIG_TRACE_DEVICES=1
CONFIG_TRACE_BOARD=1
CONFIG_TRACE_MAC=0
CONFIG_TRACE_PHY=1
#
# wrpc-sw is tainted if you change the following options
#
CONFIG_DEVELOPER=y
CONFIG_CUSTOM_RAMSIZE=196608
CONFIG_CUSTOM_STACKSIZE=2048
CONFIG_CUSTOM_PRINT_BUFSIZE=128
# CONFIG_CMD_LL is not set
# CONFIG_DAC_LOG is not set
# CONFIG_CHECK_RESET is not set
# CONFIG_SPLL_FIFO_LOG is not set
# CONFIG_PRINTF_IS_XINT is not set
CONFIG_PRINTF_IS_FULL=y
# CONFIG_PRINTF_IS_MINI is not set
# CONFIG_PRINTF_IS_NONE is not set
CONFIG_ASSERT=y
# CONFIG_DETERMINISTIC_BINARY is not set
# CONFIG_NET_VERBOSE is not set
# CONFIG_FAKE_TEMPERATURES is not set
# CONFIG_LATENCY_PROBE is not set
CONFIG_DEFAULT_PRINT_TASK_TIME_THRESHOLD=0
# CONFIG_PRINTF_XINT is not set
CONFIG_PRINTF_FULL=y
# CONFIG_PRINTF_MINI is not set
# CONFIG_PRINTF_NONE is not set
configs/target_ertm14_defconfig deleted 100644 → 0
View file @ dbb073c2
#
# Automatically generated file; DO NOT EDIT.
# WR PTP Core software configuration
#
CONFIG_ARCH_LM32=y
# CONFIG_ARCH_RISCV is not set
# CONFIG_TARGET_GENERIC_PHY_8BIT is not set
# CONFIG_TARGET_GENERIC_PHY_16BIT is not set
# CONFIG_TARGET_WR_SWITCH is not set
# CONFIG_TARGET_AFCZ is not set
CONFIG_TARGET_ERTM14=y
# CONFIG_TARGET_SIS8300KU is not set
# CONFIG_TARGET_PXIE_FMC is not set
CONFIG_WR_NODE=y
CONFIG_STACKSIZE=2048
CONFIG_PRINT_BUFSIZE=128
CONFIG_RAMSIZE=196608
CONFIG_TEMP_POLL_INTERVAL=15
CONFIG_TEMP_HIGH_THRESHOLD=70
CONFIG_TEMP_HIGH_RAPPEL=60
# CONFIG_PLL_VERBOSE is not set
# CONFIG_WRC_VERBOSE is not set
# CONFIG_VLAN is not set
CONFIG_VLAN_NR=0
CONFIG_VLAN_1_FOR_CLASS7=0
CONFIG_VLAN_2_FOR_CLASS7=0
CONFIG_VLAN_FOR_CLASS6=0
# CONFIG_HOST_PROCESS is not set
CONFIG_EMBEDDED_NODE=y
CONFIG_WRPC_PPSI=y
CONFIG_LATENCY_ETHTYPE=291
CONFIG_IPMI_CONSOLE=y
# CONFIG_IP is not set
# CONFIG_CMD_CONFIG is not set
CONFIG_BUILD_INIT=y
CONFIG_INIT_COMMAND="vlan off;ptp stop;sfp match;mode slave;ptp start"
CONFIG_HAS_BUILD_INIT=1
CONFIG_HAS_FLASH_INIT=1
CONFIG_FLASH_INIT=y
CONFIG_AUX_DIAG=y
CONFIG_GENSDBFS=y
CONFIG_WR_DIAG=y
# CONFIG_WR_NODE_SIM is not set
CONFIG_ABSCAL=y
# CONFIG_LLDP is not set
# CONFIG_CMD_PPS is not set
# CONFIG_CMD_LEAPSEC is not set
CONFIG_TRACE_MSGS=y
# CONFIG_TRACE_ALL_ENABLE is not set
CONFIG_TRACE_MAIN_ENABLE=y
CONFIG_TRACE_STORAGE_ENABLE=y
CONFIG_TRACE_DEVICES_ENABLE=y
CONFIG_TRACE_BOARD_ENABLE=y
# CONFIG_TRACE_MAC_ENABLE is not set
CONFIG_TRACE_PHY_ENABLE=y
CONFIG_TRACE_ALL=0
CONFIG_TRACE_MAIN=1
CONFIG_TRACE_STORAGE=1
CONFIG_TRACE_DEVICES=1
CONFIG_TRACE_BOARD=1
CONFIG_TRACE_MAC=0
CONFIG_TRACE_PHY=1
#
# wrpc-sw is tainted if you change the following options
#
CONFIG_DEVELOPER=y
CONFIG_CUSTOM_RAMSIZE=196608
CONFIG_CUSTOM_STACKSIZE=2048
CONFIG_CUSTOM_PRINT_BUFSIZE=128
# CONFIG_CMD_LL is not set
# CONFIG_DAC_LOG is not set
# CONFIG_CHECK_RESET is not set
# CONFIG_SPLL_FIFO_LOG is not set
# CONFIG_PRINTF_IS_XINT is not set
CONFIG_PRINTF_IS_FULL=y
# CONFIG_PRINTF_IS_MINI is not set
# CONFIG_PRINTF_IS_NONE is not set
CONFIG_ASSERT=y
# CONFIG_DETERMINISTIC_BINARY is not set
# CONFIG_NET_VERBOSE is not set
# CONFIG_FAKE_TEMPERATURES is not set
# CONFIG_LATENCY_PROBE is not set
CONFIG_DEFAULT_PRINT_TASK_TIME_THRESHOLD=0
# CONFIG_PRINTF_XINT is not set
CONFIG_PRINTF_FULL=y
# CONFIG_PRINTF_MINI is not set
# CONFIG_PRINTF_NONE is not set
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment