Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Actually, I tried to move cmd_verbose.c to ppsi, and avoid
this dependency, but our use of --gc-sections would prevent
the code to be picked into wrc.o.

Hopefully, we won't need to touch this command any more.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This merges a number of changes related to a major ppsi update,
commits by me and Aurelio Colosimo.  This last wrpc-sw commit builds,
but previous ones do not. Still, I chose to commit separately each
fix for documenting purposes, with the maintainer's approval.

The new ppsi does not sync two spec cards, because I broke it during
my development session of April 2013, but lack of even build-test led
wrpc-sw master to not even build with its ppsi submodule.

This al least brings back build-testing to a sane state, and allows us
to concentrate on making it work and benefit from the new features on
WRPC-based cards.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We need to link ppsi/proto-standard/libstd.a explicitly, but we also
need a rule to generate it, or parallel compilation fails saying it
has no rule. The makefile depended on build order (my fault), as
building ppsi/ppsi.o, with its rule), also built libstd.a

BTW, this removes ppsi/arch-wrpc/libarch.a from the dependencies,
because it is already linked in making ppsi/ppsi.o (otoh the need for
an explicit mention of libstd.a can't easily be solved in ppsi
itself, so it remains here).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

In recent ppsi code, proto-ext-whiterabbit is not replicating
proto-standard any more, but rather it offers hooks for the additional
code it needs.  Thus, we need to link the library for standard PTP as
well, to pick some of the states for the WR state machine.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This source file is now part of ppsi itself, so it is removed from
wrpc-sw. The move helps improving cleaning up and maintaing ppsi
without committing to the supermodule each time something internal changes.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit updates ppsi with the latest development, but does not
build if CONFIG_PPSI is selected. This whole branch is devoted
to a smooth merge of ppsi changes, so every wrpc-sw modification that
depends on ppsi is commited and explained separately.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commits affect several files, to be able to support both uart and
uart_sw at the same time. My aim is sending verbose ppsi diagnostics
to the uart_sw while retaining the real uart (or vuart) for the
interactive user and wrpc status gui.

To this aim, I use weak functions to avoid hairy ifdef around the code.
Now both hw and sw uarts are initialized, and the missing init just
does nothing. Also, uart_sw_write_string is always defined, and
it is an alias of uart_write_string if no uart_sw is built.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Sometimes a printf happens in the code, and it eventually prevents the
wrc to link because it pick up the whole of libc.  While ptp-noposix
already has a definition of printf to mprintf, we don't have the
same for ppsi, so let's add it.

Currently, rxts_calibrator.c includes calls to printf, and didn't
build with CONFIG_PPSI until this commit.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This introduced an "advanced" menu, only for developers, and most
questions are grouped in there, because we cannot support users
playing with experimental features or work in progress (like the new
onewire code, or the new ptp daemon) until they are the officially
supported option.

The commit also removes changes in stack size, because the new
calibration code by tom is not stack-hungry like the previous one:
wrnic_defconfig is now the same as spec_defconfig and ppsi doesn't
select a bigger stack any more.

Finally, ppsi_defconfig replaces spec_ppsi_defconfig, since we only
support the "spec" hardware configuration (other implementations we know
of are still very much spec-alike).

Unfortunately, this spits two warnings:

    Kconfig:25:warning: defaults for choice values not supported
    Kconfig:29:warning: defaults for choice values not supported

even if such defaults actually works. The next commit removes them.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Cesar Prados authored 11 years ago and Alessandro Rubini committed 11 years ago

Split a rule into two rules, to make make happy.

In previous versions of make it was acceptable to list one or more
explicit targets followed by one or more pattern targets in the same
rule and it worked "as expected". However, this was not documented as
acceptable and if you listed any explicit targets AFTER the pattern
targets, the entire rule would be mis-parsed. This release removes
this ability completely: make will generate an error message if you
mix explicit and pattern targets in the same rule. You must split
these rules into two rules: one for the pattern and one for the
explicit targets. The Linux kernel source has already been modified in
this way (in newer kernels).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Cesar Prados authored 11 years ago and Alessandro Rubini committed 11 years ago

This also adds three shell commands, for testing:

     w1w PAGE TEXT
     w1r PAGE
     w1test

The w1test command writes to 80 pages and reads them back (warning: it
erases the whole device).

Cesar Prados authored 11 years ago and Alessandro Rubini committed 11 years ago

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

call t24p calibration every time PTP is set to Slave mode, or read the value from EEPROM when Master mode

Conflicts:
	dev/dev.mk

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds the build choice about whether to use the older sockitowm or
the new "w1" implementation, which supports all three thermometers
but is still missing eeprom support (the API is defined, though, see
include/w1.h

This also adds a shell command, called "w1", which rescans the bus and
tries to read the temperature from all devices. In the example below
the third device is an eeprom, so it return an error for temperature
read-out.

   wrc# w1
   W1: 68000801dce56910
   W1: f70000001eda8242
   W1: 5f00000040e50143
   device 0: 68000801dce56910
   temp: 34.7500
   device 1: f70000001eda8242
   temp: 32.5000
   device 2: 5f00000040e50143
   temp: -32768.0000

The code is properly integrated in wrpc-sw, and the "first" thermometer is
used to build the MAC address of the device, like it used to be with
sockitowm.

The binary built with w1 is 3kB smaller than what is build with sockitowm.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds the files for an alternative to sockitowm. I called it "w1"
like in the Linux kernel, because "onewire" was already in use as file
name in this project.

The bus scanning code was a fun project of mine a few years ago, the
rest is what I did for my own crappy operating system in the last few
days.  This commit adds the files as modified to build in wrpc-sw, since
I have no "official" Bathos files yet to diff against.

This commit doesn't change the build, only adds the file, so actual
changes to existing code is all part of the next (smaller) commit.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is the host part of the software-only uart. The lm32 part is
selected at compile time (CONFIG_UART_SW).

The tool, when run, opens one or more pty pairs, and reports to stdout
which is the name of the slave descriptor. You can then run
"minicom -p /dev/pts/XXX" or other commands, to access the software uart.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This introduces dev/uart-sw as an alternative to dev/uart . The
software-only thing is a pair of circular buffers that can be driven
by tools/wrpc-uart-sw .

The software uart can be enabled by Kconfig (and is disabled by
default).  The code size is the same as the uart, but it "wastes" 306
bytes of data space.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds "sleep" that is used to verify the usleep function.
It is not build by default nor by a Kconfig option, because it is
not expected to be generally useful.

To build, add "CONFIG_CMD_SLEEP=y" to the command line of make.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds a real usleep implementation. The init function calculates
the "loops per jiffy" variable, by watching the timer ticks before
interrupts are enabled by spll_init().  This init takes 40ms.

Then, the udelay runs the same loop used in calculating lpj, and
is thus correct (it will be slower because we have interrupts running
at run time, but this is not a problem).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>