Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

WARNING: wr_switch_defconfig doesn't build, this is fixed in next commit

Unfortunately this commit makes the internal communication between
minic and lan asymmetric: on receive the tag is discarded (and the
longer header falls into the payload) while on transmit it must be
provided by lan.c.

The reason is that on receive we can trim 4 bytes from the payload,
but on send we can't add 4 bytes without a memmove.  The functions
receive pointers to two different header structures, so hopefully
user errors will be signalled by the compiler.

Still, users interact with net.c, which hides vlan completely from
them.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We used to have "struct ethhdr" local in net.c, passing "void *hdr" to
minic.  We exports the structure to an header so to use it in
communicating with the minic.  Unfortunaltey, ethhdr is defined elsewhere
too, so we'd better rename to wr_ethhdr.

This is a step towards the introduction of vlans, but has no technical
effect by itself.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Also, this changes how to mac address is retrieved in patching pfilter
rules. I'd better use format_mac(get_mac) for the verbose message,
so get_mac is also the source for patching the rules.

register and get_mac/set_mac are guaranteed to be in-sync.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This includes a wrs fix by Maciej and a change that prevents warning
when bulding with CONFIG_HOST_PROCESS (which is not there yet).  I
prefer to merge this now, so the next commit picks only its own little
change into the ppsi submodule.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds the possibility to build an init command in the
binary.  It can be useful to install a number of nodes with a special
configuration, without the need to reach the shell and/or eeprom of
each one.

This is useful, for example, to pass syslog configuration
or the (yet to be implemented) definition of multiple vlans for
etherbone and the wr fabric (frame classes 7 and 6 f the packet
filter). Moreover, I personally love to load a master or slave node
for testing without interacting with the node (or changing the flash
over and over).

This commit also makes reading of commands from storage an optional
feature, but only in the advanced/developer options. Thus, you can
build a wrpc that uses the build-time init commands, or the
flash-stored init commands, both or none of them.

Size effects:
     * no effect if you keep the defaults (no build-time init, flash init)
     * +248 bytes (+ the command itself) if you enable build-time init
     * -1...

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

the UDP checlsum was miscalculated for odd-sized payload. The last
byte was not used in calculation.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Davide Ciminaghi authored 9 years ago and Alessandro Rubini committed 8 years ago

Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>

This branch introduces the "ps" command, based on a restructuring of
how main() calls the various activities.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit turns individual calls to polling functions into an array
of tasks.  On this basis we can add profiling and periodic execution
(instead of continuous polling).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The compiler is smart enough to turn this into a multiplication by 8:

    cf54:       3d c1 00 03     sli r1,r14,3
    cf58:       59 a1 00 00     sw (r13+0),r1

and any real division by ll would be trapped by ./check-error.c .

Still, I'd better simplify the code.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

All "tasks" must have the same prototype, so we'd better get
void in all of them at the time being (so we only change the nerwork
function).

Meanwhile, use value "0" for "link down", so it can work as a simple
enable flag for the IP polling code.

(note: we query the link status in wrc_ptp_update() too, and we should
rather refer to the global variable)

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This solves http://www.ohwr.org/issues/1218



We used to have a "needIP" variable, but we need three states:
if the address was set by bootp, we run bootp again when the link goes
up, but if it was a static assignment we do not (and keep the static one).

So I renamend needIP to a 3-valued ip_status. The rename ensured the
compiler found all users.  Also, the messages are now 3-headed, so
the user know whether the address is static or it comes from bootp.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Again, it returns 1 if it did some calculation. For profiling.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is a step towards profiling. The functions being polled return
whether or not they did actually work.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is needed for the syslog code to know about link up and down
events, to report a link-up with the delay since last link-down.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We are going to have link up messages in syslog, we we'd better
pass it over and not do network thiings in main.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

I don't know why, but without this the next commit fails with a bad
assert error in the compiler.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We need the string for IP and MAC in more places than stdout.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This costs 1K in binary size, and it currently only prints an alive
message every 10 seconds.

The time format is still wrong, so the syslog daemon adds its own
timestamp.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

They are going to be used by the syslog code.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>