Keep modified snmpd.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep created ppsi.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

don't copy rsyslog.conf to the flash
Copying rsyslog.conf to the /usr/etc/rsyslog.conf didn't work anyway because
of the bug in the function copy_conf
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep created wr_date.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Description was outdated because ppsi config is generated based on
the PORTXX_PARAMS not TIME_XX.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a tool to control Rx bandwidth throttling of the traffic that goes
from WR ports to Linux. It configures the FPGA module with a maximum allowed
bandwidth in KB/s. Throttling can be enabled to prevent Linux using 100% of
the processing power to receive Ethernet frames coming from WR ports to the
CPU.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

An alternative to "set -o pipefail" in the
userspace/rootfs_override/etc/init.d/wrs_auxclk.sh is ${PIPESTATUS[0]},
but this is a bashism.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

B/W throttling requires bitstream synthesized at least from commit 8f10817 of
the wr-switch-hdl repository.

Add startup script /etc/init.d/wrs_throttling.sh for setting up throttling
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_watchdog will use WRS_LOG_OTHER instead of WRS_LOG_WRSWATCHDOG as a
destination for logs.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Uplift config utilities in the wr-switch repo and the target.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Also pass -v/-q to wrs_msg_init to get verbose messages from the libwr.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Another tool like menuconfig for changing the dot-config on the target.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Source using ". file" instead of "source file".
The second form is a bashism.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

These two libraries will be used by nconf/nconfig on target
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add support of multiple ptp instances on the same port and vlans to the wr_mon.
After the change output looks like:
 wri6 : Link down  WR Master  NoLock      i5 : no-ptp
 wri7 : Link up    Non WR     NoLock      i6 : peer: 00:00:00:00:00:00 ptp state master(6)
                                          i8 : peer: 00:1b:c5:09:0c:b8 ptp state master(6) vlans: 4,7,65
 wri8 : Link down  WR Master  NoLock      i7 : no-ptp
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

remove rules like:
--allmodconfig
--kvmconfig
--xenconfig
--tinyconfig

change directory with configs
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Print configured vlans for each ppsi instance in wrs_dump_shmem
like:
 vlans:                         15 99 115
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Now it is also possible to use for dot-config configuration:
make nconfig
make xconfig
make gconfig
make menuconfig

kconfig is taken from the linux kernel repo commit v4.8-rc1-19-g81abf25:
e50bd235 Merge tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxSigned-off-by: Adam Wujek <adam.wujek@cern.ch>

Add psmics for killall, pstree and fuser.
Since fuser comes from psmisc, it is not needed anymore to compile it in
the busybox.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add commands to wrs_sfp_dump to read/write SFP's eeprom.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add command to enable/disable dropping of frames which destination MAC
address does not match to present RTU rules.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add "learning" command to enable/disable learning of RTU to the rtu_stat
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To be used by a tool wrs_sfp_dump
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--vlan.sh needs RTU to be up. vlan.sh can be started at the same time as HAL,
  because wrs_vlans will wait for RTU.
--Postpone the start of enable_switching.sh to leave some numbers empty for
  other programs in the future.
--snmpd and lighttpd.sh can be started at the same time
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Change also wrsw_rtud.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrsw_rtud:
--remove "force" param for minipc call rtudexp_clear_entries
--pass port mask instead of port number for minipc call rtudexp_add_entry

rtu_stat:
--add a possibility to add RTU rules for a given port mask
--add a possibility to remove single RTU rule
--add a possibility to remove RTU rule for a given port mask
--add verifying of MAC address
--improve help
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a function to verify rtu type and to convert type to string.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a function to verify read MAC address.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add strtoldef for reading hex values.

When not enough parameters were given to the program, str was always pointing
to the element outside argv.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove local copy of mac_to_buffer from rtu_stat
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use define instead of magic numbers
Add enumeration of the "dynamic" field to the wrs_dump_shmem
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve wrs-user-manual and Kconfig
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--don't call the function shw_init; it is not needed
--check the number of parameters for the function write_pcs_reg
--erase ts_tx and ts_rx before use
--remove function fpga_map, use the create_map instead from util.c
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

3 places were missed when renaming interfaces from wrX to wriX+1
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Partly implement the [Feature: 1195].
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>