Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For rnabling 50ohm termination for 1-PPS input
It is set from HAL.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Requires gateware synthesized with wr-switch-hdl commit:
b1b621b add bit to control WRS 1-PPS in termination

Also increase all *_SHMEM_VERSION
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

uplift contains fixes for veryx tests
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

    The bitslide module won't be reset when replugging the SFP and fiber, which may lead to
the wrong bitslide.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

As now the compilation is done only in wr-switch-sw repo.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add MIB to /wr/lib/
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

+fix typo
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There is no support of STP yet.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

If CPU is included or not in the mask with all ports the rtu_stat shall display
"ALL CPU"

rtu_stat add mask 01:80:c2:00:00:53 0x3ffff 0
rtu_stat add mask 01:80:c2:00:00:57 0x7ffff 0

rtu_stat displayed:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL           0          STATIC  (hash 090:0)   -
[...]

now:
[...]
01:80:c2:00:00:53         ALL           0          STATIC  (hash 014:0)   -
01:80:c2:00:00:57         ALL CPU       0          STATIC  (hash 090:0)   -
[...]
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Comments are simply ignored. There are not written back to the dot-config.
This solution does not support "#" signs in the parameters' values.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Remove leading spaces (but not following)
--Ignore value if not starting with ",[digit],y,n,m
--ignore comments after value
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Merge BMCA

returns 0 on success, -1 if leap61 test failed, -2 if leap59 test failed and -3 if no-leap test failed.