An alternative to "set -o pipefail" in the
userspace/rootfs_override/etc/init.d/wrs_auxclk.sh is ${PIPESTATUS[0]},
but this is a bashism.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_watchdog will use WRS_LOG_OTHER instead of WRS_LOG_WRSWATCHDOG as a
destination for logs.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Uplift config utilities in the wr-switch repo and the target.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Also pass -v/-q to wrs_msg_init to get verbose messages from the libwr.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Another tool like menuconfig for changing the dot-config on the target.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Source using ". file" instead of "source file".
The second form is a bashism.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

These two libraries will be used by nconf/nconfig on target
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add support of multiple ptp instances on the same port and vlans to the wr_mon.
After the change output looks like:
 wri6 : Link down  WR Master  NoLock      i5 : no-ptp
 wri7 : Link up    Non WR     NoLock      i6 : peer: 00:00:00:00:00:00 ptp state master(6)
                                          i8 : peer: 00:1b:c5:09:0c:b8 ptp state master(6) vlans: 4,7,65
 wri8 : Link down  WR Master  NoLock      i7 : no-ptp
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

remove rules like:
--allmodconfig
--kvmconfig
--xenconfig
--tinyconfig

change directory with configs
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Print configured vlans for each ppsi instance in wrs_dump_shmem
like:
 vlans:                         15 99 115
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Now it is also possible to use for dot-config configuration:
make nconfig
make xconfig
make gconfig
make menuconfig

kconfig is taken from the linux kernel repo commit v4.8-rc1-19-g81abf25:
e50bd235 Merge tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxSigned-off-by: Adam Wujek <adam.wujek@cern.ch>

Add psmics for killall, pstree and fuser.
Since fuser comes from psmisc, it is not needed anymore to compile it in
the busybox.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add commands to wrs_sfp_dump to read/write SFP's eeprom.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add command to enable/disable dropping of frames which destination MAC
address does not match to present RTU rules.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add "learning" command to enable/disable learning of RTU to the rtu_stat
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To be used by a tool wrs_sfp_dump
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--vlan.sh needs RTU to be up. vlan.sh can be started at the same time as HAL,
  because wrs_vlans will wait for RTU.
--Postpone the start of enable_switching.sh to leave some numbers empty for
  other programs in the future.
--snmpd and lighttpd.sh can be started at the same time
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Change also wrsw_rtud.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrsw_rtud:
--remove "force" param for minipc call rtudexp_clear_entries
--pass port mask instead of port number for minipc call rtudexp_add_entry

rtu_stat:
--add a possibility to add RTU rules for a given port mask
--add a possibility to remove single RTU rule
--add a possibility to remove RTU rule for a given port mask
--add verifying of MAC address
--improve help
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a function to verify rtu type and to convert type to string.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a function to verify read MAC address.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add strtoldef for reading hex values.

When not enough parameters were given to the program, str was always pointing
to the element outside argv.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove local copy of mac_to_buffer from rtu_stat
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use define instead of magic numbers
Add enumeration of the "dynamic" field to the wrs_dump_shmem
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve wrs-user-manual and Kconfig
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--don't call the function shw_init; it is not needed
--check the number of parameters for the function write_pcs_reg
--erase ts_tx and ts_rx before use
--remove function fpga_map, use the create_map instead from util.c
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

3 places were missed when renaming interfaces from wrX to wriX+1
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Partly implement the [Feature: 1195].
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The tool wrs_port_tx_control is not needed anymore, its functionality (putting
the link down) is available by performing:
ifconfig <port> down
Such functionality was added in the commit:
[Feature: 1336] kernel/wr_nic: disable SFP when interface is down

Revert the following commits:
2b6c0bc2 userspace/tools: wrs_port_tx_control, rename network interfaces from wrX to wriX+1
ceb0c512 userspace/tools/wrs_port_tx_control: Include some defines
97d8878d userspace/tools/wrs_port_tx_control: initialise register address
35a63cd9 kernel/wb-regs: Added address offsets to endpoint-mdio.h
d11514e5 userspace/tools/wrs_port_tx_control: added unistd.h
3184c2a7 doc/wrs-user-manual: added description of wrs_port_tx_control
4da29df3 userspace/tools: dynamically check maximum port number in wr_port_tx_control
4244c894 userspace/tools: added a program to control the TX on a WRS port
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep low enable pin on SFP when the interface is down.
This commit makes the wrs_port_tx_control tool not needed anymore.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Implement Feature 1354 wrs_dump_shmem should also show information from LM32

Dump struct spll_stats from SoftPLL in wrs_dump_shmem
Add parameter -S to wrs_dump_shmem to print only SoftPLL
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Now wr_date depends on libwr.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--move softpll_export.h to the libwr
--create libwr/softpll.h with:
  FPGA_SPLL_STAT
  SPLL_MAGIC
--move strncpy_e from snmpd to libwr
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Print correct role after role matching
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Hal creates shmem before waiting for SoftPLL to lock. By this other programs
waiting for HAL's shmem can start.
Please note that after this fix PPSi does not create shmem before lock.
It waits for HALs minipc server to be ready.

Before shmem is created, read hal mode first.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When wrsVersionFpgaType or wrsVersionSwitchSerialNumber is UNKNOWN,
or wrsVersionScbVersion = 000 then probably hwinfo was erased or replaced
with the wersion without a serial number.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>