Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This is just a quick example with grandmaster on how to use menuconfig
to change a parameter.

The latest version of pandoc (1.16.x) shipped in Ubuntu 16.04 is more
restrictive on markdown syntax so we have fixed it.

This was requested by Paul Boven

Previous versions (4.0-4.1) incurred several errors when estimating the fiber length.

By definition, the speed v at which light travels through a medium with refractive index n is v=c/n
Since for the ITU-T G.652 D recommendation:

	"the refractive index profile of the fibre does not generally need to be known"

we chose a value provided by one of the most popular G.652 fiber manufacturers
for 1550 nm in their product information as seen in:
https://www.corning.com/media/worldwide/coc/documents/Fiber/SMF-28%20Ultra.pdf

fixed footer
changed title

added reboot button
fixed redirect to reboot page

Fixed fiber calibration table to match the dot-conf structure

first colum set as readonly

minor change to correct data representarion at wr monitorization

Fixed: Extract WR data in one place ... draw in many!
Fixed: Replace tail | head by grep if possible

added descriptive text and reboot screen

code to style tables so they match the web page, used for fiber calibration section

wrs_version value cached

Added try catch so in case it doesnt find the html tags does not throw and exception

Added WR Monitoring section to see the wr_mon output live at the web interface. It refresh each 5 seconds.

Dashboard shows live information dynamically without refreshing the web page each 5 seconds.

Signed-off-by: anne <anne@sevensols.com>
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Modified when POST fiber info at dot-conf to match alpla_tx+rx=value format

Top sfp loop corrected. Added dashboard corrections and changed tables format.

Fixed table to allow 0s and correct the POST results so they are correctly updated. Changed header to match the correct measurements symbols.

Added reset to default function

added json to create dynamic webpage with ajax

Changes:
- The Fiber calibration table has been removed due to the value vas never saved because the upper table was always being referenced
- endpointcalibrationalpha.php contains now the fiber calibration
- The header of the endpoint calibration table has been updated to match the measurement requirements
- menu.php updated with new links and reordered

This is usefull to check that the calibration value are correctly
configured when calibrating the web interface.
Signed-off-by: Benoit Rat <benoit@sevensols.com>
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When many (10 or more) non-wr compatible SFPs were used then could happen that
snmpd was not able to start (sometimes even crashing).
The problem appeared only when the logs from snmpd were not redirected,
so it too long to print the logs to the slow serial console.
Before logs were printed, the content of HAL's shmem changed and this caused
to re-read HAL's shmem and print logs again and again...

The fix is to print logs after the shmem is read.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add wrs_menuconfig and wrs_nconfig helper scripts.
Not added as alias, because they will not appear when pressing <tab>
in a console.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move instead of copy tmp files. This will remove temporary files after
the execution of apply_dot-config.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>