Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Used by SNMP
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

The following were defined, initialized, but never used
--filters_offset
--vlans_offset
--mirror_offset
--rtu_ports_offset
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

update:
--wrs_dump_shmem
--wrs_vlans (print info about untag)
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

rtu_port_shmem has nothing to do with ports.
Use rtu_shmem_p instead of rtu_shmem to make search of rtu_shmem_p easier.
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Generate dot1qPortVlanTable with a command:
mib2c -c mib2c.mfd.conf Q-BRIDGE-MIB::dot1qPortVlanTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Generate dot1qVlanCurrentTable with a command:
mib2c -c mib2c.mfd.conf Q-BRIDGE-MIB::dot1qVlanCurrentTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

In the generated code MacAddress is mapped into ASN_OCTET_STR, which uses
a length as a first byte, then the content of MAC/string.
With this behaviour of ASN_OCTET_STR, the index was 1 byte longer than suppose
to be. Anyway, it is not needed to carry the length of MacAddress since it is
defined as fixed in the MIB.
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Generate dot1qTpFdbTable with a command:
mib2c -c mib2c.mfd.conf Q-BRIDGE-MIB::dot1qTpFdbTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Added functions were copied from rtu_stat
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Remove the following OIDs, since such counters are not implemented in WRS.
--dot1dBasePortDelayExceededDiscards
--dot1dBasePortMtuExceededDiscards
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Generate dot1dBasePortTable with a command:
mib2c -c mib2c.mfd.conf BRIDGE-MIB::dot1dBasePortTable

The data in this table is static, it does not need a cache.
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

In the generated code MacAddress is mapped into ASN_OCTET_STR, which uses
a length as a first byte, then the content of MAC/string.
With this behaviour of ASN_OCTET_STR, the index was 1 byte longer than suppose
to be. Anyway, it is not needed to carry the length of MacAddress since it is
defined as fixed in the MIB.
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

dot1dStaticTable with a command:
mib2c -c mib2c.mfd.conf BRIDGE-MIB::dot1dStaticTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Only scalar objects in dot1dBase:
--dot1dBaseBridgeAddress
--dot1dBaseNumPorts
--dot1dBaseType
But without dot1dBasePortTable!

Generated with:
mib2c -c mib2c.scalar.conf BRIDGE-MIB::dot1dBase
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

dot1qFdbTable with a command:
mib2c -c mib2c.mfd.conf BRIDGE-MIB::dot1qFdbTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

dot1dTpFdbTable with a command:
mib2c -c mib2c.mfd.conf BRIDGE-MIB::dot1dTpFdbTable
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Annoying warnings like:

In file included from ./include/libwr/hal_shmem.h:7:0,
                 from ./include/libwr/fan.h:3,
                 from ./include/libwr/switch_hw.h:6,
                 from pps_gen.c:17:
./include/libwr/generic_fsm.h: In function ‘fsm_consume_state’:
./include/libwr/generic_fsm.h:134:3: warning: implicit declaration of function ‘pr_info’ [-Wimplicit-function-declaration]
   pr_info("%s: Enter state %s\n", fsm->fsm_name, fsm_get_state_name(fsm));
   ^
Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Kinga Wujek <dev_public@wujek.eu>

Signed-off-by: Kinga Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Fix the calculation of an offset in shmem when reopening shmem.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

add new OID: wrsStartCntRvlan
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Don't start radiousvlan if CONFIG_RVLAN_DAEMON is not present in dot-config
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This simply sends SIGUSR1 to radiusvlan and sorts the output file.

Example:

wri2 (001bc5090845 <-> 001bc509007d): state configured, vlan 4094, pid 0, fd -1
wri3 (001bc5090846 <-> 00e04c1bfd8d): state configured, vlan 31, pid 0, fd -1
wri4 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri5 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri6 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri7 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri8 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri9 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri10 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri11 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri12 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri13 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri14 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri15 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri16 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri17 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
wri18 (000000000000 <-> ): state down, vlan 0, pid 0, fd -1
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>