Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This commit is required to uplift a wr-switch kernel version

Since the kernel commit
850a545bd net: validate HWTSTAMP ioctl parameters
Follows: v3.1-rc9
Precedes: v3.2-rc1
SIOCSHWTSTAMP ioctl check whether field "flags" of struct hwtstamp_config
is empty, otherwise ioctl returns -EINVAL

Simillar commit exists for ppsi:
8d12b26d time-wrs: clear struct hwtstamp_config before SIOCSHWTSTAMP ioctl
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use "xterm" as a terminal type instead of default "xterm-256color" used by
gnome-terminal.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a possibility to use libmusl instead of ulibc
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Due to the fixed bug, at91bootstrap didn't work when compiled with
the gcc (4.9.3) from the buildroot 2016.02.

Patch 0011-lib-fix-warning-in-diag-printf.c.patch removes warning during
compilation.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_shm_get have to close file descriptors when it fails to open shmem.
Otherwise program which tries to open shmem will keep opening file descriptors.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Until now configuration items like WRS_LOG_HAL could change only loglevel of
syslog messages, not the verbosity of the program.

Please note that all messages produced by programs if syslog is
configured will be passed to the syslog at the same <facility>.<level>
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fixed by uplift of a kernel from 3.16.37 to 3.16.38.
Even it is a local privilege escalation bug, which does not impact us,
it is worth to have it fixed.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To error when VLANs configuration does not match in master and slave.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Error when parameters are passed in a form like "1a" (digit followed by a
  not digit)
--For access mode, error when VID is not set.
--Error when parameters in dot-config are "", if are completely empty, then
  libwr will error.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use VLANS_PORTXX_VID instead of VLANS_PORTXX_VID and VLANS_PORTXX_VID_PTP
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When wrs_vlans is parsing dot-config and VLAN0 is not configured then
add VLAN0's port mask based on port VLAN modes.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When parsing dot-config, set "untag none" for all ports that are not in ACCESS
mode.

Fix warnings in wrs_vlans
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix the commit:
e5136083 Kconfig: move ppsi VLANs configuration to VLANs section
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Meanwhile, make the mac address static to same some space/time.
But we really need a table for the mac address presets
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Substitude all occurrences of upper case strings like HOSTNAME, IPADDR and
MACADDR with the corresponding value. Before only first occurrence of each
was substituted
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

In few places drop parameter of VLANs in dot-config was descibed that
can take different set of parameters, while the only accepted was y or n.
Now it can be y, yes, 1, n, no, 0. However, the tool (wrs_vlans) can use
only 1 or 0 for "drop" parameter.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Webinterface does not support saving changes of VLAN configuration to
a dot-config. Warn user about it.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>