Keep all VLAN related configuration in the Kconfig_vlans.in.
Source this file in the Kconfig
Also copy it to the target.
Kconfig_vlans.in is generated by a command:
userspace/host_tools/gen_vlan_kconf.sh > Kconfig_vlans.in
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Since the Kconfig for VLANs contains repetable options, it is more convenient
to generate it automatically, than write it by hand.
To use this tool, simply redirect the output to the file
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a support of sourcing another file in Kconfig
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

rtu deals with frames not packets. Fix printouts.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

PHP code of the web interface was updating values of "upload_max_filesize"
and "post_max_size" in the /etc/php.ini. Besides it is extremely bad idea to
do that, such changes to take place require restart of lighttpd, which was
never performed. Luckily after the update of /etc/php.ini it was also copied
to flash at the location /usr/etc/php.ini. Because of this update via
webinterface worked only when:
--firmware.php was opened via web browser
--restart of a switch was performed

The fix contains a patch to set these values in the php.ini and remove
the update of php.ini by php code.

Set maximum upload limit size to 30M in php.ini.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Following changes were made in this commit:
--Add quotas to the arrays in the file var/www/data/wrs-data.php
--Change CONFIG_PORT00_PARAMS to CONFIG_PORT01_PARAMS in the
  var/www/endpointcalibration.php. It looks like it was missed during
  interface renaming.
--Change "file" into "firmware" in the firmware input form
--Remove the help when mouse hovers over the form. The help wasn't filled
  anyway (remove title="'.$row["help"].).
--fix part of the shell_exec command: awk '{print $NF}'
  escape the $
--use index 0..5 in the sfpcalibration.php
--remove unlink after calling "rename" function
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Implement [Feature: 1363] support of a custom script to be run at boot

Add the following objects to wrsBootStatusGroup:
--wrsCustomBootScriptSource
--wrsCustomBootScriptSourceUrl
--wrsCustomBootScriptStatus
Update wrsOSStatusGroup.wrsBootSuccessful to use information from the above
objects.

Update wrs_failures
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This will allow users to have special configuration (that is not possible to
achieve by just using dot-config) without a need to manually handle custom
script.

The script can be used from /wr/bin/custom_boot_script.sh or downloaded during
the boot. It is not possible to execute a script which was downloaded during
the previous boot. But a script can be written in such way to copy itself to
/wr/bin/custom_boot_script.sh.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add a minipc calls added at commits:
[Feature: 1055] userspace/tools: add unrec command to rtu_stat
[Feature: 1055] userspace/tools: add learning command to rtu_stat
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

no technical change
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use default hostname "wrs" when CONFIG_HOSTNAME_STATIC = y, but
CONFIG_HOSTNAME_STRING is not defined.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Length should be 128, not 64.
Bug introduced by:
a51052af userspace/snmpd: remove protocol from wrsConfigSource object
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve documentation of throttling's settings in the dot-config.
In the wrs-user-manual and in the Kconfig.

Supplements:
Merge branch 'greg-throttling'
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Allow to specify hostname in the dot-config URL and in PPSI URL.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Before, some were without @t{}, some used @i{}.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It is much more readable to have "port X" than "further port" in
the Kconfig.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--add struct shw_sfp_header sfp_header_raw to the struct hal_port_calibration.
--Increase HAL_SHMEM_VERSION to 9 due to the above
--add a parameter to the wrs_sfp_dump to dump eeprom directly from the SFP or
saved data from HAL
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

stop explicitly snmpd before reboot to avoid messages:
Jan  1 00:54:23 snmpd[1290]: read_config_store open failure on /var/lib/snmp/snmpd.conf
Otherwise snmpd was stopped after unmount of filesystems.

Stop monit to avoid possible respawn of processes during shutting down.

remove "null" from the line in /etc/inittab
null::shutdown:/etc/init.d/rcK
to get printouts to the console.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The change of parameter names was done due to change of interfaces names
(from wrX to wriX+1)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Changes:
--add edges of table
--change colors parameters
--print proto and extenstion (collumn "Pro")

Everything except many configured vlans should fit into 80char terminal
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It looks like this script was forgotten when changing names of interfaces
from wrX to wriX+1
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

add the follwing fields to the wrs_dump_shmem:
--struct pp_instance:
  --t5 /* *the* stamps */
  --t6 /* *the* stamps */
  --t4_cf /* peer delay */
  --t6_cf /* peer delay */
--struct wr_servo_state:
  --t5
  --t6
remove:
--struct pp_instance:
  --log_min_delay_req_interval
modify:
--struct pp_instance:
  --role from unsigned char to int
  --proto from unsigned char to int
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Bug introduced in the commit:
userspace/libwr: move defines of rtu entry type to libwr
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move files from /wr/etc (flash) to /etc (ramdisk) to avoid flash writes.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep modified snmpd.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep created ppsi.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

don't copy rsyslog.conf to the flash
Copying rsyslog.conf to the /usr/etc/rsyslog.conf didn't work anyway because
of the bug in the function copy_conf
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep created wr_date.conf in /etc not in /wr/etc.
There is no need to keep it in the flash instead of ramdisk.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Description was outdated because ppsi config is generated based on
the PORTXX_PARAMS not TIME_XX.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>