Skip to content

W
White Rabbit Switch - Software
Commit ae584eb1 authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

rvlan: default to "godown" at init time, not just "down" 

This renumbers FSM states so the default is "godown", that forces "auth_vlan"
on down ports. Otherwise, at boot time they remain in their previous
status (for my own wrs this was vlan 0).

Before:

   wrs# /tmp2/rvlan-status
   wri2 (001bc5090845 <-> ): state down, vlan 0, pid 0, fd -1
   [...]

After:

   wrs# /etc/init.d/radiusvlan.sh stop
   wrs# /etc/init.d/radiusvlan.sh start
   wrs# /tmp2/rvlan-status
   wri2 (001bc5090845 <-> ): state down, vlan 4090, pid 0, fd -1
   [...]
Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 99361847
Hide whitespace changes
Inline Side-by-side
Showing with 3 additions and 3 deletions
userspace/tools/radiusvlan.c
View file @ ae584eb1
...@@ -58,23 +58,23 @@ struct rvlan_dev { ...@@ -58,23 +58,23 @@ struct rvlan_dev {
}; };
enum fsm_state { enum fsm_state {
RVLAN_DOWN = 0, RVLAN_GODOWN = 0,
RVLAN_DOWN,
RVLAN_JUSTUP, RVLAN_JUSTUP,
RVLAN_SNIFF, RVLAN_SNIFF,
RVLAN_AUTH, RVLAN_AUTH,
RVLAN_CONFIG, RVLAN_CONFIG,
RVLAN_CONFIGURED, RVLAN_CONFIGURED,
RVLAN_GODOWN,
RVLAN_WAIT, RVLAN_WAIT,
}; };
char *fsm_names[] = { char *fsm_names[] = {
[RVLAN_GODOWN] = "godown",
[RVLAN_DOWN] = "down", [RVLAN_DOWN] = "down",
[RVLAN_JUSTUP] = "justup", [RVLAN_JUSTUP] = "justup",
[RVLAN_SNIFF] = "sniff", [RVLAN_SNIFF] = "sniff",
[RVLAN_AUTH] = "auth", [RVLAN_AUTH] = "auth",
[RVLAN_CONFIG] = "config", [RVLAN_CONFIG] = "config",
[RVLAN_CONFIGURED] = "configured", [RVLAN_CONFIGURED] = "configured",
[RVLAN_GODOWN] = "godown",
[RVLAN_WAIT] = "wait", [RVLAN_WAIT] = "wait",
}; };
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment