Skip to content

W
White Rabbit Switch - Software
Commit a5d39d59 authored by Federico Vaga's avatar Federico Vaga Committed by Adam Wujek
Browse files
Options

patches:kernel: remove v2.6.39 patches 

Signed-off-by: Federico Vaga's avatarFederico Vaga <federico.vaga@cern.ch>
parent d2e35c03
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 2511 deletions
patches/kernel/v2.6.39/0001-wrs3-changes-to-g45ek.patch deleted 100644 → 0
View file @ d2e35c03
From 95648bc0194a8a284b87b5555314f53e166a46f9 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Wed, 14 Sep 2011 11:23:29 +0200
Subject: [PATCH] wrs3 changes to g45ek
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 36 +++++++++++++++++++++++++++++++
1 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 6c999db..d0e1e67 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -420,6 +420,42 @@ static void __init ek_board_init(void)
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+
+ { /* Configure the EBI1 pins for the wr switch */
+ int i;
+
+ /* PC16..31: periphA as EBI1_D16..31 */
+ for (i = AT91_PIN_PC16; i <= AT91_PIN_PC31; i++)
+ at91_set_A_periph(i, 0);
+ /* PC2 and PC3 too: EBI1_A19 EBI1_A20 */
+ at91_set_A_periph(AT91_PIN_PC2, 0);
+ at91_set_A_periph(AT91_PIN_PC3, 0);
+
+ /* FIXME: We should pull rst high for when it is programmed */
+
+ /* Then, write the EBI1 configuration (NCS0 == 0x1000.0000) */
+ at91_sys_write(AT91_SMC_SETUP(0),
+ AT91_SMC_NWESETUP_(4) |
+ AT91_SMC_NCS_WRSETUP_(2) |
+ AT91_SMC_NRDSETUP_(4) |
+ AT91_SMC_NCS_RDSETUP_(2));
+ at91_sys_write(AT91_SMC_PULSE(0),
+ AT91_SMC_NWEPULSE_(30) |
+ AT91_SMC_NCS_WRPULSE_(34) |
+ AT91_SMC_NRDPULSE_(30) |
+ AT91_SMC_NCS_RDPULSE_(34));
+ at91_sys_write(AT91_SMC_CYCLE(0),
+ AT91_SMC_NWECYCLE_(40) |
+ AT91_SMC_NRDCYCLE_(40));
+ at91_sys_write(AT91_SMC_MODE(0),
+ AT91_SMC_DBW_32 |
+ AT91_SMC_TDF_(0) |
+ AT91_SMC_READMODE |
+ AT91_SMC_WRITEMODE);
+
+
+ }
+
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
--
1.7.0.4
patches/kernel/v2.6.39/0002-initramfs-stop-after-one-cpio-archive.patch deleted 100644 → 0
View file @ d2e35c03
From 4e4080233a2843d405a8c0574209a8245baa7de5 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Sat, 20 Nov 2010 13:15:48 +0100
Subject: [PATCH] initramfs: stop after one cpio archive
---
init/initramfs.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/init/initramfs.c b/init/initramfs.c
index 4b9c202..9b446ff 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -461,6 +461,7 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len)
error("junk in compressed archive");
if (state != Reset)
error("junk in compressed archive");
+ break; /* so we can use a bigger initrd size in the cmdline */
this_header = saved_offset + my_inptr;
buf += my_inptr;
len -= my_inptr;
--
1.5.6.5
patches/kernel/v2.6.39/0003-at91-NR_IRQS-increase-by-64-to-fit-custom-muxes.patch deleted 100644 → 0
View file @ d2e35c03
From 282dc8c6f8082ce6ce249363a5a1cc80a047c01a Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 17 Jan 2012 17:16:20 +0100
Subject: [PATCH 3/3] at91 NR_IRQS: increase by 64 to fit custom muxes
---
arch/arm/mach-at91/include/mach/irqs.h | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 36bd55f..04a080c 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -40,7 +40,11 @@
* symbols in gpio.h for ones handled indirectly as GPIOs.
* We make provision for 5 banks of GPIO.
*/
-#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
+#if 0
+ #define NR_IRQS (NR_AIC_IRQS + (5 * 32))
+#else /* Actually, we want to allow a pair of board-specific multiplexers */
+ #define NR_IRQS (NR_AIC_IRQS + (5 * 32) + (2 * 32))
+#endif
/* FIQ is AIC source 0. */
#define FIQ_START AT91_ID_FIQ
--
1.7.7.2
patches/kernel/v2.6.39/0004-irq-export-symbols-for-external-irq-controller.patch deleted 100644 → 0
View file @ d2e35c03
From 5a7166ccf11ae171cfd305d1b771035c4ccf2c20 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 17 Jan 2012 17:48:50 +0100
Subject: [PATCH 4/4] irq: export symbols for external irq controller
---
arch/arm/kernel/irq.c | 1 +
kernel/irq/chip.c | 1 +
kernel/irq/handle.c | 2 ++
kernel/irq/irqdesc.c | 2 ++
4 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 83bbad0..4a7f8aa 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -115,6 +115,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
/* Order is clear bits in "clr" then set bits in "set" */
irq_modify_status(irq, clr, set & ~clr);
}
+EXPORT_SYMBOL_GPL(set_irq_flags); /* for external irq controllers */
void __init init_IRQ(void)
{
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 4af1e2b..ced43d9 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -587,6 +587,7 @@ irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
irq_set_chip(irq, chip);
__irq_set_handler(irq, handle, 0, name);
}
+EXPORT_SYMBOL_GPL(irq_set_chip_and_handler_name);
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
{
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 90cb55f..4d0421e 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/random.h>
#include <linux/sched.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
@@ -33,6 +34,7 @@ void handle_bad_irq(unsigned int irq, struct irq_desc *desc)
kstat_incr_irqs_this_cpu(irq, desc);
ack_bad_irq(irq);
}
+EXPORT_SYMBOL_GPL(handle_bad_irq);
/*
* Special, empty irq handler:
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 2c039c9..d902ebf 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -110,6 +110,7 @@ struct irq_desc *irq_to_desc(unsigned int irq)
{
return radix_tree_lookup(&irq_desc_tree, irq);
}
+EXPORT_SYMBOL_GPL(irq_to_desc);
static void delete_irq_desc(unsigned int irq)
{
@@ -272,6 +273,7 @@ struct irq_desc *irq_to_desc(unsigned int irq)
{
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
+EXPORT_SYMBOL_GPL(irq_to_desc);
static void free_desc(unsigned int irq)
{
--
1.7.7.2
patches/kernel/v2.6.39/0005-Change-Vbus-pin.patch deleted 100644 → 0
View file @ d2e35c03
From d77686b1021c98a971ff3aadb8269540bdb46dd2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Tomasz=20W=C5=82ostowski?= <tomasz.wlostowski@cern.ch>
Date: Thu, 31 May 2012 13:26:20 +0200
Subject: [PATCH 5/8] Change Vbus pin
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index d0e1e67..8df2e47 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -81,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_hs_data = {
* USB HS Device port
*/
static struct usba_platform_data __initdata ek_usba_udc_data = {
- .vbus_pin = AT91_PIN_PB19,
+ .vbus_pin = AT91_PIN_PB8,
};
--
1.7.7.2
patches/kernel/v2.6.39/0006-arm-fiq-allow-modules-to-exploit-the-fiq-mechanism.patch deleted 100644 → 0
View file @ d2e35c03
From 4815f7ca121792b349d780fe099d1352329a1177 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@unipv.it>
Date: Wed, 27 May 2009 00:44:01 +0200
Subject: [PATCH 6/7] arm fiq: allow modules to exploit the fiq mechanism
This patch exports "fiq_userptr" so that a module can hook to the fiq
handler. This mechanism is used by my "fiq-engine" external package
found in gnudd.com.
To prevent data aborts in vmalloc areas during fiq-mode, vmalloc.c is
modified to update the virtual memory of all processes in map_vm_area().
Without this patch such updates happen on demand, but page faults can't
be managed in fiq mode. Unfortunately, it's #fidef CONFIG_ARM in vmalloc.c
---
arch/arm/kernel/armksyms.c | 6 ++++++
arch/arm/kernel/entry-armv.S | 24 +++++++++++++++++++++++-
mm/vmalloc.c | 37 +++++++++++++++++++++++++++++++++++++
3 files changed, 66 insertions(+), 1 deletions(-)
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index acca35a..667e836 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -49,6 +49,12 @@ extern void __aeabi_ulcmp(void);
extern void fpundefinstr(void);
+/*
+ * for fiq support (code in entry-armv.S -- ARub)
+ */
+extern void (*fiq_userptr)(void);
+EXPORT_SYMBOL(fiq_userptr);
+
EXPORT_SYMBOL(__backtrace);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e8d8856..9a7b4c8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1178,9 +1178,31 @@ __stubs_start:
* other mode than FIQ... Ok you can switch to another mode, but you can't
* get out of that mode without clobbering one register.
*/
+/* ARub: try to use it instead (we won't leave FIQ mode anyway) */
vector_fiq:
- disable_fiq
+ ldr r9, 1f
+ ldr r9, [r9]
+ movs r9, r9
+ beq fiq_ret
+ mov r8, lr
+ mov lr, pc
+ mov pc, r9 /* jump to userptr */
+ mov lr, r8
+fiq_ret:
subs pc, lr, #4
+fiq_savemm:
+ .long 0
+
+
+
+1: .long fiq_userptr
+
+.section .text /* can't live here... */
+.globl fiq_userptr
+fiq_userptr:
+ .long 0 /* This must save r0..r8 inclusive */
+.previous
+
/*=============================================================================
* Address exception handler
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 5d60302..536c2d6 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1258,6 +1258,43 @@ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
err = 0;
}
+/*
+ * In order to support installation of a non-trivial FIQ handler, on ARM
+ * we need to replicate kernel virtual memory to all processes (so it
+ * can be accessed from fiq state irrespective of what current process is).
+ * The code comes from do_translation_fault, and is arm-specific.
+ */
+#ifdef CONFIG_ARM
+ if (!err) {
+ struct task_struct *p;
+ for_each_process(p) {
+ task_lock(p);
+ if (!p->mm)
+ goto next_process;
+ if (p->mm == &init_mm)
+ goto next_process;
+ for (addr = (unsigned long)area->addr;
+ addr < end; addr += PAGE_SIZE) {
+ /* "+= PMD_SIZE" may be faster... */
+ unsigned int index;
+ pgd_t *pgd, *pgd_k;
+ pmd_t *pmd, *pmd_k;
+ /* from do_translation_fault() */
+ index = pgd_index(addr);
+ pgd = p->mm->pgd + index;
+ pgd_k = init_mm.pgd + index;
+ if (!pgd_present(*pgd))
+ set_pgd(pgd, *pgd_k);
+ pmd_k = pmd_offset(pgd_k, addr);
+ pmd = pmd_offset(pgd, addr);
+ copy_pmd(pmd, pmd_k);
+ }
+ next_process:
+ task_unlock(p);
+ }
+ }
+#endif
+
return err;
}
EXPORT_SYMBOL_GPL(map_vm_area);
--
1.7.7.2
patches/kernel/v2.6.39/0007-mtd-nand-sam9g45-can-hwecc-like-9263.patch deleted 100644 → 0
View file @ d2e35c03
From 424c448cb23511056074cda16f2e330a1f395e60 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Mon, 6 Aug 2012 12:00:27 +0200
Subject: [PATCH 7/7] mtd/nand: sam9g45 can hwecc like 9263
---
drivers/mtd/nand/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index edec457..06aaaa6 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -357,7 +357,7 @@ choice
config MTD_NAND_ATMEL_ECC_HW
bool "Hardware ECC"
- depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32 || ARCH_AT91SAM9G45
help
Use hardware ECC instead of software ECC when the chip
supports it.
--
1.7.7.2
patches/kernel/v2.6.39/0008-wrs3-use-correct-nand-partitioning.patch deleted 100644 → 0
View file @ d2e35c03
From 111a2f978f9e3271ed9e0a62e391e9d81d393d62 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 7 Aug 2012 12:42:36 +0200
Subject: [PATCH 8/8] wrs3: use correct nand partitioning
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 21 ++++++++++++++++-----
1 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 8df2e47..d40aa3c 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -131,13 +131,24 @@ static struct at91_eth_data __initdata ek_macb_data = {
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_64M,
+ .name = "Kernel",
+ .offset = 1 << 20,
+ .size = SZ_8M,
},
{
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
+ .name = "Filesystem", /* We _want_ this to be mtd1 */
+ .offset = 64 << 20,
+ .size = SZ_128M,
+ },
+ {
+ .name = "Barebox Environment",
+ .offset = 256 << 10,
+ .size = SZ_256K,
+ },
+ /* This is actuallywas MTDPART_OFS_APPEND over the filesystem */
+ {
+ .name = "Available",
+ .offset = (128+64) << 20,
.size = MTDPART_SIZ_FULL,
},
};
--
1.7.7.2
patches/kernel/v2.6.39/0009-at91-udc-force-full-speed.patch deleted 100644 → 0
View file @ d2e35c03
From 1402207cdb93a0f12ef5b544184c17b35d4ffd12 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 17 Jun 2014 10:47:30 +0200
Subject: [PATCH 9/9] at91 udc: force full speed
Some WRS speciments won't work correctly with automatic speed setup.
This patch forces full-speed on the device (instead of the
autodetected high-speed), and thus they work.
Speed is not a problem anyways, because it is just a serial port.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
drivers/usb/gadget/atmel_usba_udc.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e7c65a4..bd6ccfb 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1158,12 +1158,12 @@ static int do_test_mode(struct usba_udc *udc)
break;
case 0x0300:
/*
- * Test_SE0_NAK: Force high-speed mode and set up ep0
+ * Test_SE0_NAK: Force full-speed mode and set up ep0
* for Bulk IN transfers
*/
ep = &usba_ep[0];
usba_writel(udc, TST,
- USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
+ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_FULL));
usba_ep_writel(ep, CFG,
USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
| USBA_EPT_DIR_IN
@@ -1832,6 +1832,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
toggle_bias(1);
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+ /* Also, force full spedd or sometimes it won't work on WRS */
+ usba_writel(udc, TST,
+ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_FULL));
}
spin_unlock_irqrestore(&udc->lock, flags);
--
1.7.7.2
patches/kernel/v2.6.39/0010-sam9m10g45ek-for-wrs-new-partitioning.patch deleted 100644 → 0
View file @ d2e35c03
From 76e58431485ad6b9d78eb0eec449c723dec1ecff Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 19 Jun 2014 11:42:41 +0200
Subject: [PATCH 10/10] sam9m10g45ek (for wrs): new partitioning
This moves environment to the first meg of nand so we can later ubify
the rest of the nand memory. Such placement if compatible with
current partitioning, which is unchanged.
Also, it prepare partitions in the dataflash, to reflect actual
placement of the stuff and ease replacing barebox or at91boot from a
running system (useful for me and Benoit for release work, nobody else
is expected to change dataflash).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 46 +++++++++++++++++++++++++-----
1 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index d40aa3c..afc6418 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -25,6 +25,7 @@
#include <linux/leds.h>
#include <linux/clk.h>
#include <linux/atmel-mci.h>
+#include <linux/spi/flash.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
@@ -88,12 +89,42 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
/*
* SPI devices.
*/
+static struct mtd_partition wrs_df_parts[] = {
+ {
+ .name = "at91boot",
+ .offset = 0,
+ .size = 0x8400,
+ },
+ {
+ .name = "Barebox",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x84000,
+ },
+ {
+ .name = "Barebox-Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x8400,
+ },
+ {
+ .name = "Available-dataflash",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data wrs_df_pdata = {
+ .name = "wrs-dataflash",
+ .parts = wrs_df_parts,
+ .nr_parts = ARRAY_SIZE(wrs_df_parts),
+};
+
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
+ .platform_data = &wrs_df_pdata,
},
};
@@ -131,6 +162,11 @@ static struct at91_eth_data __initdata ek_macb_data = {
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
+ .name = "Barebox-environment-backup",
+ .offset = 0,
+ .size = SZ_1M,
+ },
+ {
.name = "Kernel",
.offset = 1 << 20,
.size = SZ_8M,
@@ -141,14 +177,8 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
.size = SZ_128M,
},
{
- .name = "Barebox Environment",
- .offset = 256 << 10,
- .size = SZ_256K,
- },
- /* This is actuallywas MTDPART_OFS_APPEND over the filesystem */
- {
- .name = "Available",
- .offset = (128+64) << 20,
+ .name = "Available-nand",
+ .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
--
1.7.7.2
patches/kernel/v2.6.39/0011-sam9m10g45ek-for-wrs-final-partitions-for-V4.1.patch deleted 100644 → 0
View file @ d2e35c03
From 382270adecef6b4950ecaa459c50ec725c2985b3 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Sat, 21 Jun 2014 08:48:04 +0200
Subject: [PATCH 11/12] sam9m10g45ek (for wrs): final partitions for V4.1
This changes the partitions in an incompatible way: then NAND
now has one partition for barebox environment (1M: 5 blocks to
protect against bad blocks) and one big partition fro UBI volumes.
Real stuff is then split in UBI volumes. Please see documentation
(in a later commit) for details.
And hwinfo is not read-only, as we need to change it sometimes.
Though rarely.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 18 +++++++-----------
1 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index afc6418..6ad8462 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/atmel-mci.h>
#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
@@ -106,6 +107,11 @@ static struct mtd_partition wrs_df_parts[] = {
.size = 0x8400,
},
{
+ .name = "hwinfo",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x840,
+ },
+ {
.name = "Available-dataflash",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
@@ -167,18 +173,8 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
.size = SZ_1M,
},
{
- .name = "Kernel",
+ .name = "UBIfied-NAND",
.offset = 1 << 20,
- .size = SZ_8M,
- },
- {
- .name = "Filesystem", /* We _want_ this to be mtd1 */
- .offset = 64 << 20,
- .size = SZ_128M,
- },
- {
- .name = "Available-nand",
- .offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
--
1.7.7.2
patches/kernel/v2.6.39/0012-sam9m10g45ek-for-wrs-more-relaxed-nand-timings.patch deleted 100644 → 0
View file @ d2e35c03
From fe419a23b22d588864496bd38b42c96617a6fe6c Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Mon, 28 Jul 2014 15:20:59 +0200
Subject: [PATCH 12/12] sam9m10g45ek (for wrs): more relaxed nand timings
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
arch/arm/mach-at91/board-sam9m10g45ek.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2eb70d5..a6e5c67 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -194,21 +194,21 @@ static struct atmel_nand_data __initdata ek_nand_data = {
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
+ .ncs_read_setup = 2,
+ .nrd_setup = 4,
+ .ncs_write_setup = 2,
+ .nwe_setup = 4,
.ncs_read_pulse = 4,
.nrd_pulse = 4,
.ncs_write_pulse = 4,
.nwe_pulse = 4,
- .read_cycle = 7,
- .write_cycle = 7,
+ .read_cycle = 12,
+ .write_cycle = 12,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
+ .tdf_cycles = 4,
};
static void __init ek_add_device_nand(void)
--
1.7.7.2
patches/kernel/v2.6.39/0013-mtd_dataflash-Read-EDI-JEDEC-to-support-AT45DB641E.patch deleted 100644 → 0
View file @ d2e35c03
From a19927112db5173ce8f93728672042070f38ebbb Mon Sep 17 00:00:00 2001
From: Benoit Rat <benoit@sevensols.com>
Date: Tue, 9 Sep 2014 19:08:11 +0200
Subject: [PATCH] mtd_dataflash: Read EDI bytes in JEDEC to support AT45DB641E
Standard JEDEC ID is only 24bits to identify a DF chip.
It also has an optional Extended Device Info (EDI) on bytes 4 and/or 5
that need to be read in order differentiate some DF chips. (i.e, the
difference between AT45DB641E and AT45DB642D is made by byte 4).
We have had two new fields in the struct flash_info:
* edi_nbytes: number of optional bytes to read (1 or 2)
* edi_jedec: EDI value for a given chip
---
drivers/mtd/devices/mtd_dataflash.c | 101 ++++++++++++++++++++++--------------
1 file changed, 62 insertions(+), 39 deletions(-)
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index c5015cc..42588e3 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -735,6 +735,12 @@ struct flash_info {
uint16_t pageoffset;
uint16_t flags;
+
+ /* JEDEC has an optional Extended Device Info (EDI) on bytes
+ * 4 and/or 5 that need to be read to differentiate some DF chips
+ */
+ uint8_t edi_nbytes;
+ uint16_t edi_jedec;
#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */
#define IS_POW2PS 0x0001 /* uses 2^N byte pages */
};
@@ -750,36 +756,40 @@ static struct flash_info __devinitdata dataflash_data [] = {
* These newer chips also support 128-byte security registers (with
* 64 bytes one-time-programmable) and software write-protection.
*/
- { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS},
- { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS, 0, 0x0},
+ { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS},
- { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS, 0, 0x0},
+ { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS},
- { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS, 0, 0x0},
+ { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS},
- { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS, 0, 0x0},
+ { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS},
- { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS, 0, 0x0},
+ { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */
+ { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0, 0, 0x0}, /* rev C */
- { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS},
- { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS, 0, 0x0},
+ { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS, 0, 0x0},
- { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS},
- { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+ { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS,1, 0x0},
+ { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS,1, 0x0},
+
+ { "AT45DB641E", 0x1f2800, 32768, 264, 9, SUP_POW2PS,1, 0x1},
+ { "at45db641e", 0x1f2800, 32768, 256, 8, SUP_POW2PS | IS_POW2PS,1, 0x1},
};
static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
{
int tmp;
uint8_t code = OP_READ_ID;
- uint8_t id[3];
+ uint8_t id[5];
uint32_t jedec;
+ uint16_t jedec_edi;
struct flash_info *info;
int status;
@@ -791,7 +801,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
* That's not an error; only rev C and newer chips handle it, and
* only Atmel sells these chips.
*/
- tmp = spi_write_then_read(spi, &code, 1, id, 3);
+ tmp = spi_write_then_read(spi, &code, 1, id, 5);
if (tmp < 0) {
DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
dev_name(&spi->dev), tmp);
@@ -805,33 +815,40 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
jedec |= id[1];
jedec = jedec << 8;
jedec |= id[2];
+
+ //EDI bytes to support newest chips
+ jedec_edi = id[3];
+ jedec_edi = jedec_edi << 8;
+ jedec_edi |= id[4];
for (tmp = 0, info = dataflash_data;
tmp < ARRAY_SIZE(dataflash_data);
tmp++, info++) {
if (info->jedec_id == jedec) {
- DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
- dev_name(&spi->dev),
- (info->flags & SUP_POW2PS)
- ? ", binary pagesize" : ""
- );
- if (info->flags & SUP_POW2PS) {
- status = dataflash_status(spi);
- if (status < 0) {
- DEBUG(MTD_DEBUG_LEVEL1,
- "%s: status error %d\n",
- dev_name(&spi->dev), status);
- return ERR_PTR(status);
- }
- if (status & 0x1) {
- if (info->flags & IS_POW2PS)
- return info;
- } else {
- if (!(info->flags & IS_POW2PS))
- return info;
- }
- } else
- return info;
+ if (info->edi_jedec == (jedec_edi >> (16-8*info->edi_nbytes))) {
+ DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+ dev_name(&spi->dev),
+ (info->flags & SUP_POW2PS)
+ ? ", binary pagesize" : ""
+ );
+ if (info->flags & SUP_POW2PS) {
+ status = dataflash_status(spi);
+ if (status < 0) {
+ DEBUG(MTD_DEBUG_LEVEL1,
+ "%s: status error %d\n",
+ dev_name(&spi->dev), status);
+ return ERR_PTR(status);
+ }
+ if (status & 0x1) {
+ if (info->flags & IS_POW2PS)
+ return info;
+ } else {
+ if (!(info->flags & IS_POW2PS))
+ return info;
+ }
+ } else
+ return info;
+ }
}
}
@@ -857,6 +874,7 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
* AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
* AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
* AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
+ * AT45DB0641E 64Mbit (8M) xx111xxx (0x3c) 32768 264 9
*/
static int __devinit dataflash_probe(struct spi_device *spi)
{
@@ -871,6 +889,11 @@ static int __devinit dataflash_probe(struct spi_device *spi)
* write procedures.
*/
info = jedec_probe(spi);
+
+ printk("MTD: %s 0x%08x %d %d %d %x\n",
+ info->name,info->jedec_id,
+ info->nr_pages,info->pagesize,info->pageoffset,info->flags);
+
if (IS_ERR(info))
return PTR_ERR(info);
if (info != NULL)
--
1.9.1
patches/kernel/v2.6.39/0014-sam9m10g45ek-for-wrs-provide-bootcount-using-scratch.patch deleted 100644 → 0
View file @ d2e35c03
From dd4abd9483cdb6bc31cba97763028770cabbfed0 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Fri, 28 Nov 2014 14:18:27 +0100
Subject: [PATCH 14/14] sam9m10g45ek (for wrs): provide bootcount using
scratch registers
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
---
arch/arm/kernel/process.c | 13 ++++
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/wrs-bootcount.c | 109 ++++++++++++++++++++++++++++++++++++
3 files changed, 123 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-at91/wrs-bootcount.c
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 5e1e541..720d1e1 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -93,6 +93,19 @@ __setup("hlt", hlt_setup);
void arm_machine_restart(char mode, const char *cmd)
{
+ uint32_t gpbr_val;
+ char *gpbr_str = (void *)&gpbr_val;
+ unsigned short *gpbr_short = (void *)&gpbr_val;
+
+ /* WRS: Change the static registers. See wrs-bootcount.c for details */
+ gpbr_val = at91_sys_read(AT91_GPBR);
+ gpbr_str[3] = 'R'; /* reboot requested by user */
+ at91_sys_write(AT91_GPBR, gpbr_val);
+
+ gpbr_val = at91_sys_read(AT91_GPBR + 4);
+ gpbr_short[1]++; /* count the user-requeted reboots */
+ at91_sys_write(AT91_GPBR + 4, gpbr_val);
+
/* Disable interrupts first */
local_irq_disable();
local_fiq_disable();
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a83835e..f1db0b2 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += wrs-bootcount.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/wrs-bootcount.c b/arch/arm/mach-at91/wrs-bootcount.c
new file mode 100644
index 0000000..9088377
--- /dev/null
+++ b/arch/arm/mach-at91/wrs-bootcount.c
@@ -0,0 +1,109 @@
+/* Alessandro Rubini for CERN 2014 */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+
+#ifdef CONFIG_RTC_DRV_AT91SAM9
+#error "This is incompatible with CONFIG_RTC_DRV_AT91SAM9"
+#endif
+
+/* This structures is mapped over the general purpose registers */
+struct wrs_bc {
+ unsigned char magic[3];
+ unsigned char last_is_reboot;
+ unsigned short boot_count;
+ unsigned short reboot_count;
+ uint32_t fault_ip;
+ uint32_t fault_lr;
+};
+
+static struct wrs_bc __bc_soft, __bc_hard;
+
+/* bc_regs points there, bc_hw is a local tmp working copy, bc_sw is sw */
+static struct wrs_bc __iomem *bc_regs;
+static struct wrs_bc *bc_hw = &__bc_hard;
+static struct wrs_bc *bc_sw = &__bc_soft;
+
+/*
+ * For some reason, memcpy_fromio and toio is not working. The MSB
+ * is repeated 4 times in the resulting word. So do it by hand
+ */
+static void copy16_fromio(void *dest, void __iomem *src)
+{
+ uint32_t __iomem *s = src;
+ uint32_t *d = dest;
+ int i;
+ for (i = 0; i < 4; i++)
+ d[i] = __raw_readl(s + i);
+}
+
+static void copy16_toio(void __iomem *dest, void *src)
+{
+ uint32_t __iomem *d = dest;
+ uint32_t *s = src;
+ int i;
+ for (i = 0; i < 4; i++)
+ __raw_writel(s[i], d + i);
+}
+
+/* As soon as possible, copy stuff over */
+static int __init wrs_bc_early_init(void)
+{
+ bc_regs = (void __iomem *)AT91_VA_BASE_SYS + AT91_GPBR;
+ copy16_fromio(bc_hw, bc_regs);
+
+ if (strncmp(bc_hw->magic, "WRS", 3)) /* power on */
+ memset(bc_hw, 0, sizeof(*bc_hw));
+
+ strncpy(bc_hw->magic, "WRS", 3);
+ bc_hw->boot_count++;
+
+ /* save sw for printing, fix hw and copy back */
+ memcpy(bc_sw, bc_hw, sizeof(*bc_sw));
+ bc_hw->last_is_reboot = 'U';
+ bc_hw->fault_ip = bc_hw->fault_lr = 0;
+ copy16_toio(bc_regs, bc_hw);
+ return 0;
+}
+early_initcall(wrs_bc_early_init);
+
+/* Over time, export in proc */
+static int wrs_bc_proc_show(struct seq_file *m, void *v)
+{
+ seq_printf(m, "boot_count: %i\n"
+ "reboot_count: %i\n"
+ "last_is_reboot: %i\n"
+ "fault_ip: 0x%08x\n"
+ "fault_lr: 0x%08x\n",
+ bc_sw->boot_count,
+ bc_sw->reboot_count,
+ bc_sw->last_is_reboot == 'R',
+ bc_sw->fault_ip,
+ bc_sw->fault_lr);
+ return 0;
+}
+
+static int wrs_bc_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wrs_bc_proc_show, NULL);
+}
+
+static const struct file_operations wrs_bc_proc_fops = {
+ .open = wrs_bc_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init proc_wrs_bc_init(void)
+{
+ /* two files use dash and two use underscore in /proc. Pick one */
+ proc_create("wrs-bootcount", 0, NULL, &wrs_bc_proc_fops);
+ return 0;
+}
+module_init(proc_wrs_bc_init);
--
1.7.7.2
patches/kernel/v2.6.39/0015-kernel-remove-deprecated-use-of-defined-in-kernel-ti.patch deleted 100644 → 0
View file @ d2e35c03
From f5eb5f7891907414caccd1d82c7171bdfafe7900 Mon Sep 17 00:00:00 2001
From: Adam Wujek <adam.wujek@cern.ch>
Date: Wed, 18 May 2016 09:22:55 +0200
Subject: [PATCH] kernel: remove deprecated use of defined in
kernel/timeconst.pl
Fix the warning (for perl < 5.21.x) whihch becomes an error
(for perl >= 5.21.x):
defined(@array) is deprecated at kernel/timeconst.pl line 373.
(Maybe you should just omit the defined()?)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
---
kernel/timeconst.pl | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
index eb51d76..0461239 100644
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -370,7 +370,7 @@ if ($hz eq '--can') {
}
@val = @{$canned_values{$hz}};
- if (!defined(@val)) {
+ if (!@val) {
@val = compute_values($hz);
}
output($hz, @val);
--
1.9.1
patches/kernel/v2.6.39/linux-config-wrswitch deleted 100644 → 0
View file @ d2e35c03
#
# Automatically generated make config: don't edit
# Linux/arm 2.6.39 Kernel Configuration
# Fri Nov 21 09:48:02 2014
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_KTIME_SCALAR=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-wr-switch"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P64X0 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_EXYNOS4 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_TCC_926 is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_VT8500 is not set
CONFIG_HAVE_NAND_ATMEL_BUSWIDTH_16=y
CONFIG_HAVE_AT91_USART3=y
#
# Atmel AT91 System-on-Chip
#
# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
# CONFIG_ARCH_AT91SAM9G10 is not set
# CONFIG_ARCH_AT91SAM9263 is not set
# CONFIG_ARCH_AT91SAM9RL is not set
# CONFIG_ARCH_AT91SAM9G20 is not set
CONFIG_ARCH_AT91SAM9G45=y
# CONFIG_ARCH_AT91CAP9 is not set
# CONFIG_ARCH_AT572D940HF is not set
# CONFIG_ARCH_AT91X40 is not set
CONFIG_AT91_PMC_UNIT=y
#
# AT91SAM9G45 Board Type
#
CONFIG_MACH_AT91SAM9M10G45EK=y
#
# AT91 Board Options
#
CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16=y
#
# AT91 Feature Selections
#
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
CONFIG_AT91_TIMER_HZ=1000
CONFIG_AT91_EARLY_DBGU=y
# CONFIG_AT91_EARLY_USART0 is not set
# CONFIG_AT91_EARLY_USART1 is not set
# CONFIG_AT91_EARLY_USART2 is not set
# CONFIG_AT91_EARLY_USART3 is not set
#
# System MMU
#
#
# Processor Type
#
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_USE_DOMAINS=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=1000
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_AUTO_ZRELADDR is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_ATMEL=y
# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_HAVE_NET_MACB=y
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_FTMAC100 is not set
CONFIG_NETDEV_1000=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NETDEV_10000=y
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_HVC_DCC is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_ATMEL=y
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_74X164 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_HAVE_FB_ATMEL=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
# CONFIG_USB_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FUSB300 is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_G_PRINTER is not set
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_RNDIS=y
# CONFIG_USB_G_MULTI_CDC is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ULPI is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_AVERAGE is not set
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment