Dissect WR frames in ptpdump (and debug output of ppsi itself)
Right now ptpdump is not WR aware. It does not interpret WR's TLV in PTP frames. For example it does not print what kind of Signalling message was received:
diag-frames-1-wri1-raw: RECV 68 bytes at 1535553497.940691456 (type c, signaling)
recv: VLAN 20
recv: TIME: (1535553497 - 0x5b86afd9) 14:38:17.941351
recv: ETH: 88f7 (00:1b:c5:09:02:e4 -> 01:1b:19:00:00:00)
recv: VERSION: 2 (type 12, len 72, domain 0)
recv: FLAGS: 0x0000 (correction 00000000)
recv: PORT: 00-1b-c5-ff-fe-09-02-e4-00-08
recv: REST: seq 6123, ctrl 5, log-interval 1
recv: MESSAGE: (G) SIGNALING
recv: MSG-SIGNALING: target-port 64-fb-81-ff-fe-2f-f9-f4-00-01
recv: TLV: type 0003 len 28 oui 08:00:30 sub de:ad:01
recv: TLV: tlv-content (size 18)
recv: TLV: 10 04 00 00 00 03 70 b7 00 00 00 00 00 03 8a e3
recv: TLV: 00 00
recv: DUMP: payload (size 72)
recv: DUMP: 0c 02 00 48 00 00 00 00 00 00 00 00 00 00 00 00
recv: DUMP: 00 00 00 00 00 1b c5 ff fe 09 02 e4 00 08 17 eb
recv: DUMP: 05 01 64 fb 81 ff fe 2f f9 f4 00 01 00 03 00 18
recv: DUMP: 08 00 30 de ad 01 10 04 00 00 00 03 70 b7 00 00
recv: DUMP: 00 00 00 03 8a e3 00 00