WRS goes to slave/EXT_OFF
WRS 6.0 is in auto, WRPC 4.2 is slave
wri3 | | 2 |wri3-1-wr-raw |auto | 22:33:44:55:66:78 | MASTER /IDLE /EXT_ON | R-W | when WRPC is changed to master, then WRS goes to slave, with EXT_ON
wri3 | | 2 |wri3-1-wr-raw |auto | 00:00:00:00:00:00 | SLAVE /IDLE /EXT_ON | R-W |when WRPC is changed to slave, then WRS goes to master, with EXT_ON as expected
when WRPC is changed to again to master, then WRS goes to slave, but with EXT_OFF
wri3 | | 2 |wri3-1-wr-raw |auto | 00:00:00:00:00:00 | SLAVE /IDLE /EXT_OFF| R-W |When WRPC is in slave it is always with EXT_ON.
WR Switch Sync Monitor WP1b-updated_ppsi_for_wrpc_v5.0 [q = quit]
WR time (TAI) : 1970-01-01 00:03:23.009846 Leap seconds: 37
Switch time (UTC): 1970-01-01 00:02:46.051845 TAI-UTC : +36.958001
TimingMode: FR PLL locking state: LOCKED
----- HAL ---|---------------------------------- PPSI --------------------------------------------------------
Iface| Freq |Inst| Name | Config | MAC of peer port | PTP/EXT/PDETECT States | Pro | VLANs
------+------+----+--------------+------------+-------------------+------------------------------+-----+------
*wri1 | | 0 |wri1-1-wr-raw |auto | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
wri2 | | 1 |wri2-1-wr-raw |auto | 00:00:00:00:00:00 | MASTER /IDLE /WA_MSG | R-W |
wri3 | | 2 |wri3-1-wr-raw |auto | 00:00:00:00:00:00 | SLAVE /IDLE /EXT_OFF| R-W |
*wri4 | | 3 |wri4-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri5 | | 4 |wri5-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri6 | | 5 |wri6-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri7 | | 6 |wri7-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri8 | | 7 |wri8-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri9 | | 8 |wri9-1-wr-raw |masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri10| | 9 |wri10-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri11| | 10 |wri11-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri12| | 11 |wri12-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri13| | 12 |wri13-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri14| | 13 |wri14-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri15| | 14 |wri15-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri16| | 15 |wri16-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri17| | 16 |wri17-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
*wri18| | 17 |wri18-1-wr-raw|masterOnly | 00:00:00:00:00:00 | DISABLED /IDLE /NONE | R-W |
Pro - Protocol mapping: V-Ethernet over VLAN; U-UDP; R-Ethernet
--------------------------- Synchronization status ----------------------------
Servo state: wri3:White-Rabbit: (wait for hw)
+- Timing parameters ---------------------------------------------------------
| meanDelay : 463.285 nsec
| delayMS : 454.022 nsec
| delayMM : 907.923 nsec
| delayAsymmetry : 0.061 nsec
| delayCoefficient : +0.000267869999999987 fpa : 1235332333756144
| ingressLatency : 277.396 nsec
| egressLatency : 238.566 nsec
| semistaticLatency: 0.000 nsec
| offsetFromMaster : 8198.022 nsec
| Update counter : 65 times
-------------------------------- Temperatures ---------------------------------
FPGA: 53.19 PLL: 51.62 PSL: 49.75 PSR: 51.88The same has been observed with the development version of WRPC (tag WP3a-wrpc_fixes)