filesystem template with updated config files

userspace/rootfs_override/etc/TZ

+GMT
\ No newline at end of file

userspace/rootfs_override/etc/fstab

+# /etc/fstab: static file system information.
+#
+# <file system>	<mount pt>	<type>	<options>         			<dump> <pass>
+/dev/root			/			ext2		rw,noauto				0		1
+proc				/proc		proc		defaults					0		0
+devpts			/dev/pts		devpts	defaults,gid=5,mode=620	0		0
+tmpfs			/tmp			tmpfs	defaults					0		0
+tmpfs			/var/log		tmpfs	defaults					0		0
+sysfs			/sys			sysfs	defaults					0		0	
+

userspace/rootfs_override/etc/ifplugd/ifplugd.action

+#!/bin/sh
+# $Id: ifplugd.action 99 2004-02-08 20:17:59Z lennart $
+
+# This file is part of ifplugd.
+#
+# ifplugd is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+# ifplugd is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with ifplugd; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+set -e
+
+if [ -z "$1" ] || [ -z "$2" ] ; then
+	echo "Wrong arguments" > /dev/stderr
+	exit 1
+fi
+
+[ "$2" = "up" ] && exec /sbin/udhcpc -n $1
+if [ "$2" = "down" ]; then
+  exec /sbin/ifconfig $1 down
+  killall udhcpc
+fi
+
+
+exit 1

userspace/rootfs_override/etc/init.d/S40network

@@ -3,6 +3,10 @@
 # Start the network....
 #
 
-# don't run dhcp-client if root is nfs.
-grep -q '/ nfs' /proc/mounts || udhcpc 
+#MAC=`/wr/bin/get_board_mac`
+#echo "Management port MAC address: $MAC"
+#ifconfig eth0 hw ether $MAC
+#ifplugd -i eth0
+#udhcpc -n
 
+/usr/sbin/ifplugd -I -f -i eth0
\ No newline at end of file

userspace/rootfs_override/etc/init.d/S60wr

+#!/bin/sh
+#!/bin/bash
+
+/wr/sbin/startup-mb.sh
\ No newline at end of file

userspace/rootfs_override/etc/init.d/S60wrsw_hal

-#!/bin/sh
-#
-# Starts dropbear sshd.
-#
-
-# Make sure the dropbearkey progam exists
-[ -f /wr/bin/wrsw_hal ] || exit 0
-
-start() {
- 	echo -n "Starting WR Hardware Abstraction Layer daemon: "
-	LD_LIBRARY_PATH="$LD_LIBRARY_PATH:/wr/lib" /wr/bin/wrsw_hal -d -f -c /wr/etc/wrsw_hal.conf
-#	/wr/bin/wrsw_rtud -d
-}
-stop() {
-	killall wrsw_rtud
-	killall wrsw_hal
-}
-
-restart() {
-	stop
-	start
-}
-
-case "$1" in
-  start)
-  	start
-	;;
-  stop)
-  	stop
-	;;
-  restart|reload)
-  	restart
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart}"
-	exit 1
-esac
-
-exit $?
-

userspace/rootfs_override/etc/inittab

@@ -14,14 +14,18 @@
 # process   == program to run
 
 # Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
+#null::sysinit:/bin/mount -o remount,rw /
+#null::sysinit:/etc/init.d/rc.sysinit
+
+#/bin/mount -t proc proc /proc
+#null::sysinit:/bin/mount -a
+#null::sysinit:/bin/mount -o remount,rw /
+#null::sysinit:/bin/hostname -F /etc/hostname
+#null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
+#null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
 
 # now run any rc scripts
+::sysinit:/etc/init.d/rc.sysinit
 ::sysinit:/etc/init.d/rcS
 
 # Set up a couple of getty's
@@ -29,7 +33,7 @@ null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
 #tty2::respawn:/sbin/getty 38400 tty2
 
 # Put a getty on the serial port
-ttyS0::respawn:/bin/ash --login
+ttyGS0::respawn:/bin/ash --login
 #/sbin/getty -L ttyS0 115200 vt100
 
 # Logging junk

userspace/rootfs_override/etc/network/interfaces

+# Configure Loopback
+auto lo
+iface lo inet loopback
+

userspace/rootfs_override/etc/profile

@@ -14,6 +14,7 @@ export LD_LIBRARY_PATH=\
 /usr/lib:\
 /wr/lib
 
+
 # If running interactively, then:
 if [ "$PS1" ]; then
 
@@ -52,3 +53,5 @@ if [ "$PS1" ]; then
     alias calc='calc -Cd '
     alias bc='calc -Cd '
 fi;
+
+export PS1="wrs-`ifconfig eth0 | grep inet | awk -F: '{ print $2 }' | awk '{ print $1 }'`#"

userspace/rootfs_override/wr/etc/hal_with_nic.conf

-global = {
-	hal_modules_path = "/wr/lib/modules";
-	hal_firmware_path = "/wr/firmware";
-	
-	main_firmware="full";
-	clkb_firmware="dmtd_pll_test";
-
-	modules = {"wr_vic.ko", "wr_rtu.ko", "wr-nic.ko"};
-};
-
-timing =  {
-	pps_width = 100000; -- PPS pulse width
-	use_external_clock = 0;
-};
-
-ports = {
-
-	wru0 = {
-		phy_rx_bias = 7700;      	-- phase measurement at which the phy delay is minimal
-		phy_rx_min = 20 * 800;   	-- minimal RX latency introduced by the PHY (in picoseconds)
-														 	-- for TLK1221 it's 20 UI of 0.8 ns each
-														 	
-		phy_rx_range = 7 * 800;		-- maximal range of RX latency nondeterminism (e.g. the difference
-															-- between the max and min. RX latency). Say, it's 3 UI.
-		
-
-		-- the same parameters for TX path
-		
-		phy_tx_bias = 3800;
-		phy_tx_min = 20 * 800;
-		phy_tx_range = 3 * 800;
-		
-		mac_addr = "auto";
-		mode = "wr_master";	
-},
-
-	wru1 = {
-		phy_rx_bias = 7700;      	-- phase measurement at which the phy delay is minimal
-		phy_rx_min = 20 * 800;   	-- minimal RX latency introduced by the PHY (in picoseconds)
-														 	-- for TLK1221 it's 20 UI of 0.8 ns each
-														 	
-		phy_rx_range = 7 * 800;		-- maximal range of RX latency nondeterminism (e.g. the difference
-															-- between the max and min. RX latency). Say, it's 3 UI.
-		
-
-		-- the same parameters for TX path
-		
-		phy_tx_bias = 3800;
-		phy_tx_min = 20 * 800 + 1500;
-		phy_tx_range = 3 * 800;
-
-		
-		mac_addr = "auto";
-		mode = "wr_slave";
-	},
-
-	wrd0 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-
-	wrd1 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	
-	wrd2 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd3 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	
-	wrd4 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd5 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-
-	wrd6 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd7 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
-		phy_tx_min = 0;
-		phy_tx_max = 0;
-		
-		mac_addr = "auto";
-		mode = "non_wr";
-	}	
-
-
-
-}
-
--- fixme: nicer detection of grandmaster mode
-f=io.popen("ip -o address | grep 192.168.1.6");
-if(f:read("*l") ~= nil) then
-	timing.use_external_clock = 1;
-end
-f:close()

userspace/rootfs_override/wr/etc/sfp_database.conf

+-- The VENDOR_SERIAL field can be set to an empty string to provide class-level
+-- information as opposed to device-level information.
+
+sfpdb = {
+  {
+    part_num = "AXGE-1254-0531",
+    alpha = 2.67871791665542e-04,
+    delta_tx = 10,
+    delta_rx = 10
+  },
+
+  {
+    part_num = "AXGE-3454-0531",
+    alpha = -2.67800055584799e-04,
+    delta_tx = 10,
+    delta_rx = 10
+  },
+  
+  
+  
+
+}

userspace/rootfs_override/wr/etc/wrsw_hal.conf

 global = {
-	hal_modules_path = "/wr/lib/modules";
-	hal_firmware_path = "/wr/firmware";
-	
-	main_firmware="rtu_with_endpoints";
-	clkb_firmware="dmtd_pll_test";
-
-	modules = {"wr_vic.ko", "wr_minic.ko"};
+	sfp_database_path = "/wr/etc/sfp_database.conf";
 };
 
 timing =  {
 	pps_width = 100000; -- PPS pulse width
-	use_external_clock = 0;
+--	use_nmea = 1; -- take UTC seconds from NMEA GPS clock connected to /dev/ttyS2
+--	mode = "GrandMaster"; -- grand-master with external reference
 };
 
 ports = {
 
-	wru0 = {
-		phy_rx_bias = 5600;      	-- phase measurement at which the phy delay is minimal
-		phy_rx_min = 20 * 800 - 3900;   	-- minimal RX latency introduced by the PHY (in picoseconds)
-														 	-- for TLK1221 it's 20 UI of 0.8 ns each
-														 	
-		phy_rx_range = 7 * 800;		-- maximal range of RX latency nondeterminism (e.g. the difference
-															-- between the max and min. RX latency). Say, it's 3 UI.
+	wr0 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
 		
+		mac_addr = "auto";
+		mode = "wr_slave";	
+	};
 
-		-- the same parameters for TX path
-		
-		phy_tx_bias = 3800;
-		phy_tx_min = 20 * 800;
-		phy_tx_range = 3 * 800;
+	wr1 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
 		
 		mac_addr = "auto";
 		mode = "wr_master";	
-},
-
-	wru1 = {
-		phy_rx_bias = 5600;      	-- phase measurement at which the phy delay is minimal
-		phy_rx_min = 20 * 800 - 3900;   	-- minimal RX latency introduced by the PHY (in picoseconds)
-														 	-- for TLK1221 it's 20 UI of 0.8 ns each
-														 	
-		phy_rx_range = 7 * 800;		-- maximal range of RX latency nondeterminism (e.g. the difference
-															-- between the max and min. RX latency). Say, it's 3 UI.
-		
+	};
 
-		-- the same parameters for TX path
+	wr2 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
 		
-		phy_tx_bias = 3800;
-		phy_tx_min = 20 * 800;
-		phy_tx_range = 3 * 800;
+		mac_addr = "auto";
+		mode = "wr_master";	
+	};
 
+	wr3 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
 		
 		mac_addr = "auto";
-		mode = "wr_slave";
-	},
+		mode = "wr_master";	
+	};
 
-	wrd0 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+	wr4 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
+		mode = "wr_master";	
+	};
 
-	wrd1 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+	wr5 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	
-	wrd2 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+
+	wr6 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd3 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+	wr7 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	
-	wrd4 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+	wr8 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd5 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+	wr9 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-
-	wrd6 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+	wr10 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	},
-	
-	wrd7 = {
-		phy_rx_bias = 0;
-		phy_rx_min = 0;
-		phy_rx_max = 0;
-		
-		phy_tx_bias = 0;
+		mode = "wr_master";	
+	};
+
+	wr11 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
 		phy_tx_min = 0;
-		phy_tx_max = 0;
 		
 		mac_addr = "auto";
-		mode = "non_wr";
-	}	
-
+		mode = "wr_master";	
+	};
 
+	wr12 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
+		
+		mac_addr = "auto";
+		mode = "wr_master";	
+	};
 
-}
+	wr13 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
+		
+		mac_addr = "auto";
+		mode = "wr_master";	
+	};
 
--- fixme: nicer detection of grandmaster mode
---f=io.popen("ip -o address | grep 192.168.1.6");
---if(f:read("*l") ~= nil) then
---	timing.use_external_clock = 1;
---end
---f:close()
+	wr14 = {
+		phy_rx_min = 160000;   	-- minimal RX latency introduced by the PHY (in picoseconds)
+		phy_tx_min = 0;
+		
+		mac_addr = "auto";
+		mode = "wr_master";	
+	};
+};

userspace/rootfs_override/wr/sbin/start-daemons.sh

+#!/bin/ash
+
+echo "Starting up WR daemons..."
+
+export WR_HOME="/wr"
+
+$WR_HOME/bin/wrsw_hal -c $WR_HOME/etc/wrsw_hal.conf &> /dev/kmsg &
+$WR_HOME/bin/wrsw_rtud >& /dev/kmsg &
+$WR_HOME/bin/ptpd -A -c >& /dev/null &
+

userspace/rootfs_override/wr/sbin/startup-mb.sh

+#!/bin/ash
+
+echo "Starting up WR Switch (18-ports MiniBackplane version)..."
+export WR_HOME="/wr"
+
+$WR_HOME/bin/load-fpga $WR_HOME/lib/firmware/8ports_mb.bin
+$WR_HOME/bin/lm32-loader $WR_HOME/lib/firmware/rt_cpu.bin
+insmod $WR_HOME/lib/modules/wr_vic.ko
+insmod $WR_HOME/lib/modules/wr-nic.ko
+insmod $WR_HOME/lib/modules/wr_rtu.ko
+$WR_HOME/sbin/start-daemons.sh
\ No newline at end of file