Skip to content
Snippets Groups Projects
Commit 5d96712e authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files

patches/barebox: remove old version, not supported for wrs 


Signed-off-by: default avatarAlessandro Rubini <rubini@gnudd.com>
parent 1ea0e6ca
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 0 additions and 806 deletions
patches/barebox/v2012.05/0001-sam945-include-mtd-nand.h-in-device-file.patch deleted 100644 → 0
+ 0
− 24
View file @ 1ea0e6ca
From ab00d84a5a40103540929e0f568936e732de1561 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Fri, 16 Sep 2011 01:12:15 +0200
Subject: [PATCH 1/7] sam945: include mtd/nand.h in device file
---
arch/arm/mach-at91/at91sam9g45_devices.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index ca96f58..86c6b86 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -18,6 +18,7 @@
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/io.h>
+#include <linux/mtd/nand.h>
#include "generic.h"
--
1.7.7.2
patches/barebox/v2012.05/0002-arm-change-prompt-for-pm9263-wrs-piggy-backs-on-that.patch deleted 100644 → 0
+ 0
− 26
View file @ 1ea0e6ca
From 1346e9eb583d9e986aaed7827c9808e755f5f9b9 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 15 Sep 2011 23:53:57 +0200
Subject: [PATCH 2/7] arm: change prompt for pm9263 (wrs piggy-backs on that
code)
---
arch/arm/mach-at91/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 1bec3e5..85becd0 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -20,7 +20,7 @@ config BOARDINFO
default "Calao USB-A9G20" if MACH_USB_A9G20
default "Ronetix PM9261" if MACH_PM9261
default "Ronetix PM9263" if MACH_PM9263
- default "Ronetix PM9G45" if MACH_PM9G45
+ default "CERN White Rabbit Switch V3" if MACH_PM9G45
default "Aizo dSS11" if MACH_DSS11
default "Calao TNY-A9260" if MACH_TNY_A9260
default "Calao TNY-A9263" if MACH_TNY_A9263
--
1.7.7.2
patches/barebox/v2012.05/0003-nand-wrs-our-nand-is-16-bit-connected-fix-accordingl.patch deleted 100644 → 0
+ 0
− 90
View file @ 1ea0e6ca
From 1bc1314180bad7c821dfb464b35f0fbaa4445afb Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Tue, 6 Mar 2012 01:26:28 +0100
Subject: [PATCH 3/7] nand wrs: our nand is 16-bit connected: fix accordingly
---
arch/arm/boards/pm9g45/init.c | 6 +++---
drivers/mtd/nand/atmel_nand.c | 26 ++++++++++++++++++++++----
2 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 9b22276..9ecd628 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -44,9 +44,9 @@ static struct atmel_nand_data nand_pdata = {
.ale = 21,
.cle = 22,
/* .det_pin = ... not connected */
- .rdy_pin = AT91_PIN_PD3,
+ .rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
+ .bus_width_16 = 1,
};
static struct sam9_smc_config pm_nand_smc_config = {
@@ -69,7 +69,7 @@ static struct sam9_smc_config pm_nand_smc_config = {
static void pm_add_device_nand(void)
{
- pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
+ pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(3, &pm_nand_smc_config);
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 96624a1..bad75a9 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -141,6 +141,13 @@ static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
memcpy_fromio(buf, chip->IO_ADDR_R, len);
}
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
@@ -148,6 +155,14 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
memcpy_toio(chip->IO_ADDR_W, buf, len);
}
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
+
/*
* Calculate HW ECC
*
@@ -391,11 +406,14 @@ static int __init atmel_nand_probe(struct device_d *dev)
nand_chip->chip_delay = 20; /* 20us command delay time */
- if (host->board->bus_width_16) /* 16-bit bus width */
+ if (host->board->bus_width_16) { /* 16-bit bus width */
nand_chip->options |= NAND_BUSWIDTH_16;
-
- nand_chip->read_buf = atmel_read_buf;
- nand_chip->write_buf = atmel_write_buf;
+ nand_chip->read_buf = atmel_read_buf16;
+ nand_chip->write_buf = atmel_write_buf16;
+ } else {
+ nand_chip->read_buf = atmel_read_buf;
+ nand_chip->write_buf = atmel_write_buf;
+ }
atmel_nand_enable(host);
--
1.7.7.2
patches/barebox/v2012.05/0004-add-DHCP-retries-by-tom.patch deleted 100644 → 0
+ 0
− 58
View file @ 1ea0e6ca
From d1a2f69e329a2affd7d201916e43c7d758392932 Mon Sep 17 00:00:00 2001
From: Benoit Rat <benoit@sevensols.com>
Date: Tue, 15 May 2012 17:08:41 +0200
Subject: [PATCH 4/7] add DHCP retries by tom
---
net/dhcp.c | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/net/dhcp.c b/net/dhcp.c
index ad32b53..befb536 100644
--- a/net/dhcp.c
+++ b/net/dhcp.c
@@ -607,6 +607,7 @@ static void dhcp_reset_env(void)
static int do_dhcp(int argc, char *argv[])
{
int ret, opt;
+ int retries=-1;
dhcp_reset_env();
@@ -627,6 +628,7 @@ static int do_dhcp(int argc, char *argv[])
}
}
+
dhcp_con = net_udp_new(0xffffffff, PORT_BOOTPS, dhcp_handler, NULL);
if (IS_ERR(dhcp_con)) {
ret = PTR_ERR(dhcp_con);
@@ -643,14 +645,25 @@ static int do_dhcp(int argc, char *argv[])
if (ret)
goto out1;
+ if(argc >= 2)
+ retries = simple_strtoul(argv[1], NULL, 10);
+
while (dhcp_state != BOUND) {
if (ctrlc())
break;
+ if (!retries)
+ {
+ ret = ETIMEDOUT;
+ goto out1;
+ }
+
net_poll();
if (is_timeout(dhcp_start, 3 * SECOND)) {
dhcp_start = get_time_ns();
printf("T ");
ret = bootp_request();
+ if(retries > 0)
+ retries--;
if (ret)
goto out1;
}
--
1.7.7.2
patches/barebox/v2012.05/0005-gpio-add-function-to-check-them.patch deleted 100644 → 0
+ 0
− 51
View file @ 1ea0e6ca
From 870d9b65b080f1c20cba7d1aa0850d10d03a416c Mon Sep 17 00:00:00 2001
From: Benoit Rat <benoit@sevensols.com>
Date: Mon, 28 May 2012 12:23:13 +0200
Subject: [PATCH 5/7] gpio: add function to check them
---
arch/arm/boards/pm9g45/init.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 9ecd628..4fba7c2 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -40,6 +40,25 @@
#include <mach/at91sam9_smc.h>
#include <mach/sam9_smc.h>
+/*
+ * board revision encoding
+ * V3.1 => by default: PA4 is 1 & PC7 is 0.
+ * V3.2 => by default: PA4 is 0 & PC7 is 1
+ */
+static void wrs3_check_gpios(void)
+{
+ if (!gpio_request(AT91_PIN_PA4, "") &&
+ !gpio_request(AT91_PIN_PC7, ""))
+ {
+ printf("GPIOs: PA4=%d (%d), PC7=%d (%d)\n",
+ gpio_get_value(AT91_PIN_PA4),AT91_PIN_PA4,gpio_get_value(AT91_PIN_PC7),AT91_PIN_PC7);
+ }
+ else
+ {
+ printf("Error: unable to acquire board GPIOs\n");
+ }
+}
+
static struct atmel_nand_data nand_pdata = {
.ale = 21,
.cle = 22,
@@ -149,6 +168,8 @@ static int pm9g45_devices_init(void)
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_6 + 0x100));
armlinux_set_architecture(MACH_TYPE_PM9G45);
+ wrs3_check_gpios();
+
return 0;
}
device_initcall(pm9g45_devices_init);
--
1.7.7.2
patches/barebox/v2012.05/0006-startup-load-default-environment-when-loading-env-fa.patch deleted 100644 → 0
+ 0
− 31
View file @ 1ea0e6ca
From 2e8236836297567aa26d011c7d83c34ecc245b28 Mon Sep 17 00:00:00 2001
From: Benoit Rat <benoit@sevensols.com>
Date: Mon, 2 Jul 2012 12:59:15 +0200
Subject: [PATCH 6/7] startup: load default environment when loading env
failed
---
common/startup.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/common/startup.c b/common/startup.c
index abd1b77..2992c43 100644
--- a/common/startup.c
+++ b/common/startup.c
@@ -147,6 +147,13 @@ void start_barebox (void)
run_command("source /env/bin/init", 0);
} else {
printf("not found\n");
+ if (stat("/env/", &s)) {
+ printf("Error loading %s. "
+ "Using default environment\n",
+ default_environment_path);
+ envfs_load("/dev/defaultenv", "/env");
+ run_command("source /env/bin/init", 0);
+ }
}
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
--
1.7.7.2
patches/barebox/v2012.05/0007-wrs-on-pm9g45-change-nand-setup.patch deleted 100644 → 0
+ 0
− 34
View file @ 1ea0e6ca
From ac10c839955dd332630cc497f6a5f69d5bfb9201 Mon Sep 17 00:00:00 2001
From: Benoit Rat <benoit@sevensols.com>
Date: Mon, 9 Jul 2012 13:40:30 +0200
Subject: [PATCH 7/7] wrs (on pm9g45): change nand setup
---
arch/arm/boards/pm9g45/init.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 4fba7c2..182afd5 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -19,7 +19,6 @@
* MA 02111-1307 USA
*
*/
-
#include <common.h>
#include <net.h>
#include <init.h>
@@ -160,8 +159,7 @@ static int pm9g45_devices_init(void)
at91_add_device_eth(0, &macb_pdata);
pm9g45_add_device_usbh();
- devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
- dev_add_bb_dev("self_raw", "self0");
+ //device, offset, size, flag, name
devfs_add_partition("nand0", 0x40000, 0x40000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
--
1.7.7.2
patches/barebox/v2012.05/0008-barebox-add-MAC-address-to-environment.patch deleted 100644 → 0
+ 0
− 49
View file @ 1ea0e6ca
From 8892b8a2a8b0bec9f5f2bead0401cb56f5be9227 Mon Sep 17 00:00:00 2001
From: Federico Vaga <federico.vaga@gmail.com>
Date: Tue, 23 Oct 2012 01:44:59 +0200
Subject: [PATCH] barebox: add MAC addresses to environment
This patch add to default mac addresses to the barebox evironment. The
first MAC address (eth0.ethaddr) is the one to assign to the ethernet
port on board.
The second MAC address (macaddr) is the base for all switch ports
Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
---
common/environment.c | 13 +++++++++++++
1 file modificato, 13 inserzioni(+)
diff --git a/common/environment.c b/common/environment.c
index 0fdbd03..7b5d5ea 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -176,6 +176,10 @@ int envfs_load(char *filename, char *dir)
char *str, *tmp;
int namelen_full;
unsigned long size;
+#ifdef __BAREBOX__
+ char *mac_addr_1="02:34:56:78:9A:BC";
+ char *mac_addr_2="02:34:56:78:9A:00";
+#endif
envfd = open(filename, O_RDONLY);
if (envfd < 0) {
@@ -269,6 +273,15 @@ int envfs_load(char *filename, char *dir)
}
ret = 0;
+
+#ifdef __BAREBOX__
+ /* When the environment is correctly loaded, set the MAC address */
+ setenv("eth0.ethaddr", mac_addr_1);
+ export("eth0.ethaddr");
+ setenv("macaddr", mac_addr_2);
+ export("macaddr");
+#endif
+
out:
close(envfd);
if (buf_free)
--
1.7.11.7
patches/barebox/v2012.05/env/bin/boot-nand deleted 100644 → 0
+ 0
− 14
View file @ 1ea0e6ca
#!/bin/sh
# boot kernel from bad block aware partition
cp /dev/nand0.kernel.bb /dev/mem.kernel
bootargs="quiet console=ttyS0,115200 panic=10 mem=64M"
bootargs="$bootargs root=/dev/mtdblock1 rootfstype=jffs2 ro"
bootargs="$bootargs wr_nic.macaddr=$macaddr"
bootz /dev/mem.kernel
# If it don't boot, show the menu
echo "Can't boot from NAND"
# Sleep 2 seconds so you can see the message and return to menu
sleep 2
menu -s boot
patches/barebox/v2012.05/env/bin/boot-script deleted 100644 → 0
+ 0
− 24
View file @ 1ea0e6ca
#!/bin/sh
# This script loads a wrboot script from the TFTP server and runs it.
if [ "x$eth0.ipaddr" = "x" ]; then
dhcp 5;
fi
# fetch wrboot-<MAC> script, or <IP>/wrboot or wrboot
tftp wrboot-$eth0.ethaddr wrboot
if [ "$?" -ne "0" ]; then
sleep 1
tftp $eth0.ipaddr/wrboot wrboot
fi
if [ "$?" -ne "0" ]; then
sleep 1
tftp wrboot wrboot
fi
if [ "$?" -eq "0" ]; then
./wrboot
fi
# If the script doesn't boot return to menu after some time to read output
sleep 2
menu -s boot
patches/barebox/v2012.05/env/bin/edit-config deleted 100644 → 0
+ 0
− 8
View file @ 1ea0e6ca
#!/bin/sh
edit /env/config
. /env/config
saveenv
sleep 2
menu -s boot
patches/barebox/v2012.05/env/bin/init deleted 100644 → 0
+ 0
− 68
View file @ 1ea0e6ca
#!/bin/sh
# If we are in the flashing procedure, start with the kernel and file system
# loaded into the DDR memory
memcmp -s /dev/mem -d /env/magicstr 0x71FFFFF8 0x0 8
if [ $? -eq 0 ]; then
echo "Booting kernel for NAND flashing procedure"
bootargs="console=ttyS0,115200 panic=10 mem=64M"
bootargs="$bootargs initrd=0x72000000,25M"
bootargs="$bootargs root=/dev/ram0"
addpart /dev/ram0 0x1000000@0x1000000(kernel)
addpart /dev/ram0 0x1000000@0x2000000(initrd)
bootm /dev/ram0.kernel
fi
#default value (can be overridden in /env/config)
preboot_timeout="3"
autoboot_timeout="5"
autoboot_select="1"
### Override default value using /env/config
. /env/config
echo "Starting up barebox [wrs3] (MAC=$eth0.ethaddr)"
### Generic setup
PATH=/env/bin
export PATH
if [ x$autoboot_timeout != x ]; then
menu_timeout="-A $autoboot_timeout"
fi
#Set 2nd LED ON (PA2)
gpio_set_value 33 0
PS1="wrs-$eth0.ethaddr# "
### Creating the partitions:
if [ -e /dev/mem.kernel ]; then
else
addpart /dev/mem 8M@0x71000000(kernel)
fi
if [ -e /dev/nand0.kernel ]; then
else
addpart /dev/nand0 256k@0x4000(bareboxenv),8M@0x100000(kernel),-@0x4000000(rootfs)
fi
if [ -e /dev/nand0.kernel.bb ]; then
else
nand -a /dev/nand0.*
fi
# Create the menu
#menu -r -m boot
menu -a -m boot -d "Welcome on WRSv3 Boot Sequence"
menu -e -a -m boot -c 'boot-nand' -d "boot from nand (default)"
menu -e -a -m boot -c 'boot-script' -d "boot from TFTP script"
menu -e -a -m boot -c 'edit-config' -d "edit config"
menu -e -a -m boot -c 'exit 0' -d "exit to shell"
menu -e -a -m boot -c reset -d "reboot"
# allow the user to see previous messages
echo "starting menu in ${preboot_timeout} seconds"
sleep ${preboot_timeout}
# Select by default a specific menu
menu -m boot -S -n $autoboot_select
#Use a timeout to let the user change the entry in menu
menu -s boot $menu_timeout
patches/barebox/v2012.05/env/config deleted 100644 → 0
+ 0
− 23
View file @ 1ea0e6ca
#!/bin/sh
## Please type Ctrl+D to Save-and-exit or Ctrl+C to Exit
## eth0.ethaddr corresponds to the MAC address of the switch, it can also be
## changes using flasher
# eth0.ethaddr=
## macaddr is the base MAC address to assign to the first switch port. All
## the other ports are sequentially assigned
# macaddr=
## You can set your networking parameters here
## If unset, then boot-script will use dhcp
## This is shipped as unset ("if false" below)
if false; then
eth0.serverip=192.168.1.1
eth0.ipaddr=192.168.1.2
eth0.netmask=255.255.255.0
eth0.gateway=192.168.1.254
fi
## Timeout to autoboot in the pre-selected menu
autoboot_timeout="5";
patches/barebox/v2012.05/env/magicstr deleted 100644 → 0
+ 0
− 1
View file @ 1ea0e6ca
paperino
\ No newline at end of file
patches/barebox/v2012.05/wrs3_defconfig deleted 100644 → 0
+ 0
− 305
View file @ 1ea0e6ca
#
# Automatically generated make config: don't edit
# Linux/arm 2011.09.0 Barebox Configuration
# Tue Jan 24 21:02:43 2012
#
# CONFIG_BOARD_LINKER_SCRIPT is not set
CONFIG_GENERIC_LINKER_SCRIPT=y
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
#
# System Type
#
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_VERSATILE is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_ARCH_TEXT_BASE=0x73f00000
CONFIG_BOARDINFO="CERN White Rabbit Switch V3"
#
# Atmel AT91 System-on-Chip
#
# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
# CONFIG_ARCH_AT91SAM9263 is not set
# CONFIG_ARCH_AT91SAM9G10 is not set
# CONFIG_ARCH_AT91SAM9G20 is not set
CONFIG_ARCH_AT91SAM9G45=y
# CONFIG_MACH_AT91SAM9M10G45EK is not set
CONFIG_MACH_PM9G45=y
#
# AT91 Board Options
#
# CONFIG_AEABI is not set
#
# Arm specific settings
#
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_EXCEPTIONS=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_GREGORIAN_CALENDER=y
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_CMD_MEMORY=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
#
# General Settings
#
CONFIG_LOCALVERSION_AUTO=y
CONFIG_ENVIRONMENT_VARIABLES=y
#
# memory layout
#
# CONFIG_MMU is not set
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x73f00000
CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
CONFIG_MEMORY_LAYOUT_DEFAULT=y
# CONFIG_MEMORY_LAYOUT_FIXED is not set
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x400000
# CONFIG_BROKEN is not set
# CONFIG_EXPERIMENTAL is not set
CONFIG_MALLOC_DLMALLOC=y
# CONFIG_KALLSYMS is not set
CONFIG_PROMPT="WRS-3> "
CONFIG_BAUDRATE=115200
CONFIG_LONGHELP=y
CONFIG_CBSIZE=1024
CONFIG_MAXARGS=16
CONFIG_SHELL_HUSH=y
# CONFIG_SHELL_SIMPLE is not set
CONFIG_GLOB=y
CONFIG_PROMPT_HUSH_PS2="y"
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_HUSH_GETOPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
CONFIG_PASSWORD=y
# CONFIG_PASSWD_SUM_MD5 is not set
CONFIG_PASSWD_SUM_SHA1=y
# CONFIG_PASSWD_SUM_SHA256 is not set
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_CONSOLE_FULL=y
CONFIG_CONSOLE_ACTIVATE_FIRST=y
# CONFIG_OF_FLAT_TREE is not set
CONFIG_PARTITION=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9g45/env"
# CONFIG_POLLER is not set
#
# Debugging
#
CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_FLASH_NOISE=y
CONFIG_ENABLE_PARTITION_NOISE=y
CONFIG_ENABLE_DEVICE_NOISE=y
CONFIG_COMMAND_SUPPORT=y
#
# commands
#
#
# scripting
#
CONFIG_CMD_EDIT=y
CONFIG_CMD_SLEEP=y
CONFIG_CMD_SAVEENV=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_TRUE=y
CONFIG_CMD_FALSE=y
CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_LOGIN=y
CONFIG_CMD_PASSWD=y
CONFIG_PASSWD_MODE_HIDE=y
# CONFIG_PASSWD_MODE_STAR is not set
# CONFIG_PASSWD_MODE_CLEAR is not set
# CONFIG_CMD_TIME is not set
#
# file commands
#
CONFIG_CMD_LS=y
CONFIG_CMD_RM=y
CONFIG_CMD_CAT=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_RMDIR=y
CONFIG_CMD_CP=y
CONFIG_CMD_PWD=y
CONFIG_CMD_CD=y
CONFIG_CMD_MOUNT=y
CONFIG_CMD_UMOUNT=y
CONFIG_CMD_NAND=y
#
# console
#
CONFIG_CMD_CLEAR=y
CONFIG_CMD_ECHO=y
CONFIG_CMD_ECHO_E=y
#
# memory
#
CONFIG_CMD_LOADB=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
# CONFIG_CMD_MD5SUM is not set
# CONFIG_CMD_SHA1SUM is not set
# CONFIG_CMD_SHA256SUM is not set
CONFIG_CMD_MTEST=y
CONFIG_CMD_MTEST_ALTERNATIVE=y
#
# flash
#
CONFIG_CMD_FLASH=y
# CONFIG_CMD_UBI is not set
#
# booting
#
CONFIG_CMD_BOOTM=y
CONFIG_CMD_BOOTM_ZLIB=y
CONFIG_CMD_BOOTM_BZLIB=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_BOOTU=y
CONFIG_CMD_RESET=y
CONFIG_CMD_GO=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_TEST=y
CONFIG_CMD_VERSION=y
CONFIG_CMD_HELP=y
CONFIG_CMD_DEVINFO=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_UNLZO=y
CONFIG_NET=y
CONFIG_NET_DHCP=y
CONFIG_NET_NFS=y
CONFIG_NET_PING=y
CONFIG_NET_TFTP=y
CONFIG_NET_TFTP_PUSH=y
CONFIG_NET_NETCONSOLE=y
CONFIG_NET_RESOLV=y
#
# Drivers
#
#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
# CONFIG_DRIVER_SERIAL_NS16550 is not set
CONFIG_DRIVER_SERIAL_ATMEL=y
CONFIG_HAS_MACB=y
CONFIG_MIIDEV=y
#
# Network drivers
#
# CONFIG_DRIVER_NET_SMC911X is not set
# CONFIG_DRIVER_NET_SMC91111 is not set
CONFIG_DRIVER_NET_MACB=y
#
# SPI drivers
#
CONFIG_SPI=y
# CONFIG_I2C is not set
#
# flash drivers
#
# CONFIG_DRIVER_CFI is not set
CONFIG_MTD=y
CONFIG_NAND=y
CONFIG_NAND_WRITE=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_HW is not set
# CONFIG_NAND_ECC_HW_SYNDROME is not set
# CONFIG_NAND_ECC_HW_NONE is not set
CONFIG_NAND_INFO=y
CONFIG_NAND_BBT=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_ATMEL=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_UBI is not set
# CONFIG_ATA is not set
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_VIDEO is not set
# CONFIG_MCI is not set
CONFIG_CLKDEV_LOOKUP=y
#
# MFD
#
# CONFIG_I2C_MC13892 is not set
# CONFIG_DRIVER_SPI_MC13783 is not set
# CONFIG_LED is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT25=y
#
# Filesystem support
#
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
# CONFIG_FS_FAT is not set
CONFIG_ZLIB=y
CONFIG_BZLIB=y
CONFIG_CRC32=y
CONFIG_CRC16=y
CONFIG_DIGEST=y
# CONFIG_MD5 is not set
CONFIG_SHA1=y
# CONFIG_SHA256 is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment