Skip to content

W
White Rabbit
Commit 4af4136f authored by Grzegorz Daniluk's avatar Grzegorz Daniluk
Browse files
Options

make all documents,presentations and papers use _graphicspath_ instead of long path to each figure

parent 09bb6cb7
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 944 additions and 890 deletions
documents/calibration/distant_tricks.tex
View file @ 4af4136f
...@@ -30,7 +30,7 @@ Neutrinos to Gran Sasso project \cite{cngs}. It requires: ...@@ -30,7 +30,7 @@ Neutrinos to Gran Sasso project \cite{cngs}. It requires:
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.8\textwidth]{../../figures/calibration/loopback_fibre.ps} \includegraphics[width=.8\textwidth]{calibration/loopback_fibre.ps}
\caption{Measuring 1-PPS offset using a loop-back fiber} \caption{Measuring 1-PPS offset using a loop-back fiber}
\label{fig:loopback} \label{fig:loopback}
\end{center} \end{center}
......
documents/calibration/errors.tex
View file @ 4af4136f
...@@ -101,11 +101,11 @@ round-trip delay changes over time for the two fiber cables: 5km and 5m. ...@@ -101,11 +101,11 @@ round-trip delay changes over time for the two fiber cables: 5km and 5m.
\begin{figure}[ht] \begin{figure}[ht]
a) a)
\begin{minipage}{.5\textwidth} \begin{minipage}{.5\textwidth}
\includegraphics[width=\textwidth]{../../figures/calibration/rtt_long.ps} \includegraphics[width=\textwidth]{calibration/rtt_long.ps}
\end{minipage} \end{minipage}
b) b)
\begin{minipage}{.5\textwidth} \begin{minipage}{.5\textwidth}
\includegraphics[width=\textwidth]{../../figures/calibration/rtt_short.ps} \includegraphics[width=\textwidth]{calibration/rtt_short.ps}
\end{minipage} \end{minipage}
\caption{$delay_{MM}$ of 5 km (a) and 5 m (b) fiber logged for almost 12 hours using two WR Switches} \caption{$delay_{MM}$ of 5 km (a) and 5 m (b) fiber logged for almost 12 hours using two WR Switches}
\label{fig:errors:deltemp} \label{fig:errors:deltemp}
...@@ -183,7 +183,7 @@ from a signal generator (e.g. Agilent 33250A) or it can be also a 62.5MHz clock ...@@ -183,7 +183,7 @@ from a signal generator (e.g. Agilent 33250A) or it can be also a 62.5MHz clock
output taken from a WR Switch. output taken from a WR Switch.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../figures/calibration/oscil_meas.ps} \includegraphics[width=\textwidth]{calibration/oscil_meas.ps}
\caption{Measuring internal jitter of an oscilloscope} \caption{Measuring internal jitter of an oscilloscope}
\label{fig:errors:osc_jitter} \label{fig:errors:osc_jitter}
\end{center} \end{center}
...@@ -193,7 +193,7 @@ oscilloscope using a 62.5MHz clock output from a free-running WR Switch is ...@@ -193,7 +193,7 @@ oscilloscope using a 62.5MHz clock output from a free-running WR Switch is
presented in figure \ref{fig:errors:lecroy_jitter}. presented in figure \ref{fig:errors:lecroy_jitter}.
\begin{figure} \begin{figure}
\begin{center} \begin{center}
\includegraphics[width=.8\textwidth]{../../figures/calibration/lecroy_7300_jitter.ps} \includegraphics[width=.8\textwidth]{calibration/lecroy_7300_jitter.ps}
\caption{Uncertainty of LeCroy Wavepro 7300A oscilloscope} \caption{Uncertainty of LeCroy Wavepro 7300A oscilloscope}
\label{fig:errors:lecroy_jitter} \label{fig:errors:lecroy_jitter}
\end{center} \end{center}
......
documents/calibration/intro.tex
View file @ 4af4136f
...@@ -8,7 +8,7 @@ hardware delays and fiber propagation latencies presented in figure ...@@ -8,7 +8,7 @@ hardware delays and fiber propagation latencies presented in figure
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../figures/calibration/link-model.ps} \includegraphics[width=\textwidth]{calibration/link-model.ps}
\caption{White Rabbit link model} \caption{White Rabbit link model}
\label{fig:intro:link-model} \label{fig:intro:link-model}
\end{center} \end{center}
......
documents/calibration/procedure.tex
View file @ 4af4136f
...@@ -23,7 +23,7 @@ It is a few kilometers long and its parameters will be measured. ...@@ -23,7 +23,7 @@ It is a few kilometers long and its parameters will be measured.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.6\textwidth]{../../figures/calibration/fiber_1.ps} \includegraphics[width=.6\textwidth]{calibration/fiber_1.ps}
\caption{Measuring total fiber propagation latency} \caption{Measuring total fiber propagation latency}
\label{fig:refiber:latency} \label{fig:refiber:latency}
\end{center} \end{center}
...@@ -100,7 +100,7 @@ $f_1$, $f_2$ as presented in figure \ref{fig:fiasym}. ...@@ -100,7 +100,7 @@ $f_1$, $f_2$ as presented in figure \ref{fig:fiasym}.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.9\textwidth]{../../figures/calibration/fiber_2.ps} \includegraphics[width=.9\textwidth]{calibration/fiber_2.ps}
\caption{Measuring fiber $f_2$ asymmetry} \caption{Measuring fiber $f_2$ asymmetry}
\label{fig:fiasym} \label{fig:fiasym}
\end{center} \end{center}
...@@ -178,7 +178,7 @@ $\Delta_{RX}$) of the WR Calibrator, the connection shown in figure ...@@ -178,7 +178,7 @@ $\Delta_{RX}$) of the WR Calibrator, the connection shown in figure
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.5\textwidth]{../../figures/calibration/calibrator.ps} \includegraphics[width=.5\textwidth]{calibration/calibrator.ps}
\caption{Measuring Calibrator latencies} \caption{Measuring Calibrator latencies}
\label{fig:calibrator} \label{fig:calibrator}
\end{center} \end{center}
...@@ -243,7 +243,7 @@ will later create a White Rabbit Network (fig.\ref{fig:devices}). ...@@ -243,7 +243,7 @@ will later create a White Rabbit Network (fig.\ref{fig:devices}).
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.5\textwidth]{../../figures/calibration/wr_device.ps} \includegraphics[width=.5\textwidth]{calibration/wr_device.ps}
\caption{WR Device calibration with WR Calibrator and known \caption{WR Device calibration with WR Calibrator and known
fiber $f_1$} fiber $f_1$}
\label{fig:devices} \label{fig:devices}
......
documents/calibration/recover_calibrator.tex
View file @ 4af4136f
...@@ -9,7 +9,7 @@ already-deployed network. ...@@ -9,7 +9,7 @@ already-deployed network.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.5\textwidth]{../../figures/calibration/recover_calibrator.ps} \includegraphics[width=.5\textwidth]{calibration/recover_calibrator.ps}
\caption{Calibrating a new WR Calibrator for an already-existing WR network} \caption{Calibrating a new WR Calibrator for an already-existing WR network}
\label{fig:recover_calibrator} \label{fig:recover_calibrator}
\end{center} \end{center}
......
documents/calibration/wrcalib.tex
View file @ 4af4136f
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
\usepackage{listings} \usepackage{listings}
\usepackage{cancel} \usepackage{cancel}
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% creating subsubsubsection notation % creating subsubsubsection notation
...@@ -61,7 +62,7 @@ ...@@ -61,7 +62,7 @@
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\vspace{1.3cm} \vspace{1.3cm}
\includegraphics[width=0.50\textwidth]{../../figures/logo/WRlogo.ps} \includegraphics[width=0.50\textwidth]{logo/WRlogo.ps}
\label{fig:wr_logo} \label{fig:wr_logo}
\end{figure} \end{figure}
......
documents/specifications/HDL/WRS_HDL-SW_IF/ep.tex
View file @ 4af4136f
...@@ -129,7 +129,7 @@ value has to be incremented). The format of data word is presented in figure ...@@ -129,7 +129,7 @@ value has to be incremented). The format of data word is presented in figure
\ref{fig:ep:inject_data}: \ref{fig:ep:inject_data}:
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.8\textwidth]{../../../../figures/switch/ep_inject.ps} \includegraphics[width=.8\textwidth]{switch/ep_inject.ps}
\caption{Format of data word for programming the injection engine} \caption{Format of data word for programming the injection engine}
\label{fig:ep:inject_data} \label{fig:ep:inject_data}
\end{center} \end{center}
......
documents/specifications/HDL/WRS_HDL-SW_IF/nic.tex
View file @ 4af4136f
...@@ -33,7 +33,7 @@ read to get the event which caused the interrupt. ...@@ -33,7 +33,7 @@ read to get the event which caused the interrupt.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../../../figures/switch/nic_txdesc.ps} \includegraphics[width=\textwidth]{switch/nic_txdesc.ps}
\caption{Tx descriptor} \caption{Tx descriptor}
\label{fig:nic:tx_desc} \label{fig:nic:tx_desc}
\end{center} \end{center}
...@@ -57,7 +57,7 @@ read to get the event which caused the interrupt. ...@@ -57,7 +57,7 @@ read to get the event which caused the interrupt.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../../../figures/switch/nic_rxdesc.ps} \includegraphics[width=\textwidth]{switch/nic_rxdesc.ps}
\caption{Rx descriptor} \caption{Rx descriptor}
\label{fig:nic:rx_desc} \label{fig:nic:rx_desc}
\end{center} \end{center}
......
documents/specifications/HDL/WRS_HDL-SW_IF/rts.tex
View file @ 4af4136f
...@@ -8,7 +8,7 @@ Real-Time Subsystem. ...@@ -8,7 +8,7 @@ Real-Time Subsystem.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.8\textwidth]{../../../../figures/switch/rt_sub.ps} \includegraphics[width=.8\textwidth]{switch/rt_sub.ps}
\caption{Internal layout of Real-Time Subsystem block} \caption{Internal layout of Real-Time Subsystem block}
\label{fig:rts:hdl} \label{fig:rts:hdl}
\end{center} \end{center}
......
documents/specifications/HDL/WRS_HDL-SW_IF/rtu.tex
View file @ 4af4136f
...@@ -113,7 +113,7 @@ figure \ref{fig:rtu:htab_adr}. ...@@ -113,7 +113,7 @@ figure \ref{fig:rtu:htab_adr}.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=.7\textwidth]{../../../../figures/switch/rtu_mfifo_adr.ps} \includegraphics[width=.7\textwidth]{switch/rtu_mfifo_adr.ps}
\end{center} \end{center}
\caption{Structure of HTAB address} \caption{Structure of HTAB address}
\label{fig:rtu:htab_adr} \label{fig:rtu:htab_adr}
......
documents/specifications/HDL/WRS_HDL-SW_IF/switch_hdl.tex
View file @ 4af4136f
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
\usepackage{hyperref} \usepackage{hyperref}
\usepackage[none]{hyphenat} \usepackage[none]{hyphenat}
\usepackage{listings} \usepackage{listings}
\graphicspath{ {../../../../figures/} }
%\usepackage{draftwatermark} %\usepackage{draftwatermark}
%\usepackage{cancel} %\usepackage{cancel}
...@@ -87,7 +88,7 @@ ...@@ -87,7 +88,7 @@
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\vspace{1.3cm} \vspace{1.3cm}
\includegraphics[width=0.50\textwidth]{../../../../figures/logo/WRlogo.ps} \includegraphics[width=0.50\textwidth]{logo/WRlogo.ps}
\label{fig:wr_logo} \label{fig:wr_logo}
\end{figure} \end{figure}
......
documents/specifications/HDL/WRS_HDL-SW_IF/top.tex
View file @ 4af4136f
...@@ -12,7 +12,7 @@ and Network Interface \linebreak Controller. ...@@ -12,7 +12,7 @@ and Network Interface \linebreak Controller.
\begin{figure}[ht] \begin{figure}[ht]
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../../../figures/switch/switch_hdl_v4.0.ps} \includegraphics[width=\textwidth]{switch/switch_hdl_v4.0.ps}
\caption{Top HDL design of the WR Switch} \caption{Top HDL design of the WR Switch}
\label{fig:switch_top} \label{fig:switch_top}
\end{center} \end{center}
......
documents/specifications/WR-spec/from_tomeks_msc.tex
View file @ 4af4136f
...@@ -9,7 +9,7 @@ prerequisite for achieving the required synchronization accuracy. The model ...@@ -9,7 +9,7 @@ prerequisite for achieving the required synchronization accuracy. The model
of a WR optical link is depicted in Figure~\ref{fig:link_model}. of a WR optical link is depicted in Figure~\ref{fig:link_model}.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=15cm]{../../../figures/protocol/link_model.eps} \includegraphics[width=15cm]{protocol/link_model.eps}
\caption{Model of a WR link (a) and relations between master and slave \caption{Model of a WR link (a) and relations between master and slave
clocks (b)} clocks (b)}
\label{fig:link_model} \label{fig:link_model}
...@@ -61,7 +61,7 @@ recovered clock (deriving $phase_{S}$ from $offset_{MS}$) to match the phase ...@@ -61,7 +61,7 @@ recovered clock (deriving $phase_{S}$ from $offset_{MS}$) to match the phase
of the master clock, completing the synchronization. of the master clock, completing the synchronization.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=15cm]{../../../figures/protocol/sync_flow.eps} \includegraphics[width=15cm]{protocol/sync_flow.eps}
\caption{WR synchronization flow (DMTD is explained in Appendix~\ref{s:dmtd})} \caption{WR synchronization flow (DMTD is explained in Appendix~\ref{s:dmtd})}
\label{fig:sync_flow} \label{fig:sync_flow}
\end{figure} \end{figure}
...@@ -85,7 +85,7 @@ During the first two steps of the synchronization flow ...@@ -85,7 +85,7 @@ During the first two steps of the synchronization flow
and message exchanges which result in a syntonized link. and message exchanges which result in a syntonized link.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=7cm]{../../../figures/protocol/link_detect_and_syntonization.eps} \includegraphics[width=7cm]{protocol/link_detect_and_syntonization.eps}
\caption{WR Link detection and syntonization} \caption{WR Link detection and syntonization}
\label{fig:link_detect_and_syntonization} \label{fig:link_detect_and_syntonization}
\end{figure} \end{figure}
...@@ -121,7 +121,7 @@ single-cycle timestamping accuracy, which is necessary for reliably merging the ...@@ -121,7 +121,7 @@ single-cycle timestamping accuracy, which is necessary for reliably merging the
coarse delay with the $phase_{MM}$ phase shift during fine delay calculation. coarse delay with the $phase_{MM}$ phase shift during fine delay calculation.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=17cm]{../../../figures/protocol/coarse_measurement.eps} \includegraphics[width=17cm]{protocol/coarse_measurement.eps}
\caption{Structure of a WR timestamping unit (TSU)} \caption{Structure of a WR timestamping unit (TSU)}
\label{fig:coarse_measurement} \label{fig:coarse_measurement}
\end{figure} \end{figure}
...@@ -159,7 +159,7 @@ clocks are jittery, the transitions may sometimes occur in reverse order, ...@@ -159,7 +159,7 @@ clocks are jittery, the transitions may sometimes occur in reverse order,
producing an erroneous timestamp of value 1. producing an erroneous timestamp of value 1.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=10cm]{../../../figures/protocol/ts_jitter.eps} \includegraphics[width=10cm]{protocol/ts_jitter.eps}
\caption{Timestamping errors caused by clock jitter} \caption{Timestamping errors caused by clock jitter}
\label{fig:ts_jitter} \label{fig:ts_jitter}
\end{figure} \end{figure}
...@@ -174,7 +174,7 @@ ensures that at least one of the timestamps is valid at any moment ...@@ -174,7 +174,7 @@ ensures that at least one of the timestamps is valid at any moment
current phase shift between clocks (see section \ref{s:fine_delay}). current phase shift between clocks (see section \ref{s:fine_delay}).
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=12cm]{../../../figures/protocol/ts_dualedge.eps} \includegraphics[width=12cm]{protocol/ts_dualedge.eps}
\caption{Dual-edge timestamping in WR} \caption{Dual-edge timestamping in WR}
\label{fig:ts_dualedge} \label{fig:ts_dualedge}
\end{figure} \end{figure}
...@@ -200,7 +200,7 @@ The fine delay measurements in WR are based on a Dual Mixer Time Difference ...@@ -200,7 +200,7 @@ The fine delay measurements in WR are based on a Dual Mixer Time Difference
DMTD technology will be presented. DMTD technology will be presented.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=11cm]{../../../figures/misc/analog_dmtd.eps} \includegraphics[width=11cm]{misc/analog_dmtd.eps}
\caption{Structure of an analog DMTD phase detector} \caption{Structure of an analog DMTD phase detector}
\label{fig:analog_dmtd} \label{fig:analog_dmtd}
\end{figure} \end{figure}
...@@ -238,7 +238,7 @@ analog mixing operation can be transformed into a digital sampling operation, ...@@ -238,7 +238,7 @@ analog mixing operation can be transformed into a digital sampling operation,
resulting in a digital DMTD detector, shown on fig. \ref{fig:digital_dmtd}. resulting in a digital DMTD detector, shown on fig. \ref{fig:digital_dmtd}.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=12cm]{../../../figures/misc/dmtd.eps} \includegraphics[width=12cm]{misc/dmtd.eps}
\caption{Structure of a digital DMTD phase detector} \caption{Structure of a digital DMTD phase detector}
\label{fig:digital_dmtd} \label{fig:digital_dmtd}
\end{figure} \end{figure}
...@@ -250,7 +250,7 @@ equivalent to analog mixing (\ref{eq:mixing2}), but the principle of a DDMTD ...@@ -250,7 +250,7 @@ equivalent to analog mixing (\ref{eq:mixing2}), but the principle of a DDMTD
can be explained in a more intuitive way. can be explained in a more intuitive way.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=15cm]{../../../figures/misc/dmtd_vernier.eps} \includegraphics[width=15cm]{misc/dmtd_vernier.eps}
\caption{A vernier (a) and signals generated by DDMTD (b)} \caption{A vernier (a) and signals generated by DDMTD (b)}
\label{fig:dmtd_vernier} \label{fig:dmtd_vernier}
\end{figure} \end{figure}
...@@ -282,7 +282,7 @@ required, even a PLL integrated inside an FPGA can be used, eliminating all ...@@ -282,7 +282,7 @@ required, even a PLL integrated inside an FPGA can be used, eliminating all
external components. external components.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=8cm]{../../../figures/misc/dmtd_glitches.eps} \includegraphics[width=8cm]{misc/dmtd_glitches.eps}
\caption{Glitches in the DMTD output caused by clock jitter} \caption{Glitches in the DMTD output caused by clock jitter}
\label{fig:dmtd_glitches} \label{fig:dmtd_glitches}
\end{figure} \end{figure}
...@@ -336,7 +336,7 @@ delay was simulated using the slave's phase shifter. ...@@ -336,7 +336,7 @@ delay was simulated using the slave's phase shifter.
\end{table} \end{table}
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=13cm]{../../../figures/protocol/merging_timestamps.eps} \includegraphics[width=13cm]{protocol/merging_timestamps.eps}
\caption{Algorithm for enhancing coarse timestamps with DMTD phase.} \caption{Algorithm for enhancing coarse timestamps with DMTD phase.}
\label{fig:merging_timestamps} \label{fig:merging_timestamps}
\end{figure} \end{figure}
...@@ -373,7 +373,7 @@ final output of the merging algorithm is shown in \ref{fig:merging_example} ...@@ -373,7 +373,7 @@ final output of the merging algorithm is shown in \ref{fig:merging_example}
as the thick navy trace. as the thick navy trace.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=12cm]{../../../figures/protocol/merging_example.eps} \includegraphics[width=12cm]{protocol/merging_example.eps}
\caption{Example of $t_{4p}$ timestamp enhancing.} \caption{Example of $t_{4p}$ timestamp enhancing.}
\label{fig:merging_example} \label{fig:merging_example}
\end{figure} \end{figure}
...@@ -416,7 +416,7 @@ asymmetry), ...@@ -416,7 +416,7 @@ asymmetry),
\end{itemize} \end{itemize}
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=\textwidth]{../../../figures/protocol/asymmetries.eps} \includegraphics[width=\textwidth]{protocol/asymmetries.eps}
\caption{Delay asymmetries in WR optical link.} \caption{Delay asymmetries in WR optical link.}
\label{fig:asymmetries} \label{fig:asymmetries}
\end{figure} \end{figure}
...@@ -540,7 +540,7 @@ because of these optimizations, PHYs may not keep constant transmit/receive ...@@ -540,7 +540,7 @@ because of these optimizations, PHYs may not keep constant transmit/receive
latencies. The problem is illustrated in Figure~\ref{fig:phy_asymmetry}. latencies. The problem is illustrated in Figure~\ref{fig:phy_asymmetry}.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=11cm]{../../../figures/protocol/phy_asymmetry.eps} \includegraphics[width=11cm]{protocol/phy_asymmetry.eps}
\caption{Random delays in gigabit SerDes devices (a) and blocks causing them \caption{Random delays in gigabit SerDes devices (a) and blocks causing them
(b).} (b).}
\label{fig:phy_asymmetry} \label{fig:phy_asymmetry}
...@@ -573,7 +573,7 @@ switch) is shown in Figure~\ref{fig:phy_latency_measurement}. ...@@ -573,7 +573,7 @@ switch) is shown in Figure~\ref{fig:phy_latency_measurement}.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \includegraphics[width=\textwidth]{fig/tomeksDrawings/phy_latency_measurement.eps} % \includegraphics[width=\textwidth]{fig/tomeksDrawings/phy_latency_measurement.eps}
\includegraphics[width=0.60\textwidth]{../../../figures/misc/calibration_1.ps} \includegraphics[width=0.60\textwidth]{misc/calibration_1.ps}
\caption{PHY latency measurement using calibration patterns.} \caption{PHY latency measurement using calibration patterns.}
\label{fig:phy_latency_measurement} \label{fig:phy_latency_measurement}
\end{figure} \end{figure}
...@@ -647,7 +647,7 @@ of Sync-E and only the clock offset needs to be corrected. Offset correction ...@@ -647,7 +647,7 @@ of Sync-E and only the clock offset needs to be corrected. Offset correction
is split into 3 steps: is split into 3 steps:
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=\textwidth]{../../../figures/protocol/adjustment_and_servo.eps} \includegraphics[width=\textwidth]{protocol/adjustment_and_servo.eps}
\caption{WR slave offset adjustment (a) and clock servo (b)} \caption{WR slave offset adjustment (a) and clock servo (b)}
\label{fig:adjustment_and_servo} \label{fig:adjustment_and_servo}
\end{figure} \end{figure}
......
documents/specifications/WR-spec/wrspec.tex
View file @ 4af4136f
...@@ -28,6 +28,8 @@ ...@@ -28,6 +28,8 @@
\usepackage{times,mathptmx} \usepackage{times,mathptmx}
\usepackage{chngcntr} \usepackage{chngcntr}
\graphicspath{ {../../../figures/} }
%%%%%5% used in Tomeks %%%%%%% %%%%%5% used in Tomeks %%%%%%%
\usepackage{listings} \usepackage{listings}
\usepackage{cancel} \usepackage{cancel}
...@@ -81,7 +83,7 @@ ...@@ -81,7 +83,7 @@
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\vspace{1.3cm} \vspace{1.3cm}
\includegraphics[width=0.50\textwidth]{../../../figures/logo/WRlogo.ps} \includegraphics[width=0.50\textwidth]{logo/WRlogo.ps}
\label{fig:wr_logo} \label{fig:wr_logo}
\end{figure} \end{figure}
...@@ -225,7 +227,7 @@ and time retrieved from the upstream link to all the downstream links. ...@@ -225,7 +227,7 @@ and time retrieved from the upstream link to all the downstream links.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=0.60\textwidth]{../../../figures/network/wrTopology.eps} \includegraphics[width=0.60\textwidth]{network/wrTopology.eps}
\caption{White Rabbit network; it forms a hierarchical topology.} \caption{White Rabbit network; it forms a hierarchical topology.}
\label{fig:wrNetwork} \label{fig:wrNetwork}
\end{figure} \end{figure}
...@@ -262,7 +264,7 @@ which is the case in White Rabbit. ...@@ -262,7 +264,7 @@ which is the case in White Rabbit.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.30\textwidth]{../../../figures/protocol/ptpMSGs.ps} \includegraphics[width=0.30\textwidth]{protocol/ptpMSGs.ps}
\caption{PTP messages used by WRPTP.} \caption{PTP messages used by WRPTP.}
\label{fig:wrPTPmsgs} \label{fig:wrPTPmsgs}
\end{figure} \end{figure}
...@@ -353,7 +355,7 @@ section~\ref{sec:physcorr} provides such an equation obtained empirically for on ...@@ -353,7 +355,7 @@ section~\ref{sec:physcorr} provides such an equation obtained empirically for on
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.95\textwidth]{../../../figures/protocol/delaymodel.eps} \includegraphics[width=0.95\textwidth]{protocol/delaymodel.eps}
\caption{Delay model of a WR link. The timestamps are accurately corrected \caption{Delay model of a WR link. The timestamps are accurately corrected
for link asymmetries by the usage of the four fixed delays for link asymmetries by the usage of the four fixed delays
$\Delta_{\{tx_m, rx_s, tx_s, rx_m\}}$ and the relationship $\Delta_{\{tx_m, rx_s, tx_s, rx_m\}}$ and the relationship
...@@ -463,7 +465,7 @@ An example hardware implementation is described in detail in Appendix~\ref{sec:s ...@@ -463,7 +465,7 @@ An example hardware implementation is described in detail in Appendix~\ref{sec:s
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.9\textwidth]{../../../figures/protocol/clocksHwSpec.ps} \includegraphics[width=0.9\textwidth]{protocol/clocksHwSpec.ps}
\caption{WR protocol and WR Hardware overview.} \caption{WR protocol and WR Hardware overview.}
\label{fig:clocksHwSpec} \label{fig:clocksHwSpec}
\end{figure} \end{figure}
...@@ -578,7 +580,7 @@ the standard PTP protocol will be used for synchronization. ...@@ -578,7 +580,7 @@ the standard PTP protocol will be used for synchronization.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=0.8\textwidth]{../../../figures/network/hybrid.ps} \includegraphics[width=0.8\textwidth]{network/hybrid.ps}
\caption{Hybrid WR/IEEE1588 network. White Rabbit nodes work \caption{Hybrid WR/IEEE1588 network. White Rabbit nodes work
transparently with PTP nodes. WR ordinary clock 3 is more accurately transparently with PTP nodes. WR ordinary clock 3 is more accurately
synchronized to the grandmaster than WR ordinary clock 2, which synchronized to the grandmaster than WR ordinary clock 2, which
...@@ -590,7 +592,7 @@ the standard PTP protocol will be used for synchronization. ...@@ -590,7 +592,7 @@ the standard PTP protocol will be used for synchronization.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=0.99\textwidth]{../../../figures/protocol/wrptpMSGs_1.ps} \includegraphics[width=0.99\textwidth]{protocol/wrptpMSGs_1.ps}
\caption{Simplified overview of the message flow in WRPTP.} \caption{Simplified overview of the message flow in WRPTP.}
\label{fig:wrptpMSGs} \label{fig:wrptpMSGs}
\end{figure} \end{figure}
...@@ -1069,7 +1071,7 @@ backupParentDS data set. ...@@ -1069,7 +1071,7 @@ backupParentDS data set.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.85\textwidth]{../../../figures/protocol/SDA.ps} \includegraphics[width=0.85\textwidth]{protocol/SDA.ps}
\caption{Modified State Decision Algorithm (modifications in red).} \caption{Modified State Decision Algorithm (modifications in red).}
\label{fig:modifiedSDA} \label{fig:modifiedSDA}
\end{figure} \end{figure}
...@@ -1520,7 +1522,7 @@ WR Master and WR Slave. ...@@ -1520,7 +1522,7 @@ WR Master and WR Slave.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.85\textwidth]{../../../figures/protocol/modifiedPtpFSM.ps} \includegraphics[width=0.85\textwidth]{protocol/modifiedPtpFSM.ps}
\caption{Modified PTP Finite State Machine.} \caption{Modified PTP Finite State Machine.}
\label{fig:modifiedPtpFSM} \label{fig:modifiedPtpFSM}
\end{figure} \end{figure}
...@@ -1676,7 +1678,7 @@ WR\_LINK\_ON & Upon entering this state, the WR Master sends the WR\_LINK ...@@ -1676,7 +1678,7 @@ WR\_LINK\_ON & Upon entering this state, the WR Master sends the WR\_LINK
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=1.00\textwidth]{../../../figures/protocol/wrFSM.eps} \includegraphics[width=1.00\textwidth]{protocol/wrFSM.eps}
\caption{White Rabbit state machine.} \caption{White Rabbit state machine.}
\label{fig:wrFSM} \label{fig:wrFSM}
\end{figure} \end{figure}
...@@ -2020,7 +2022,7 @@ WRPTP shall implement the following implementation-specific features: ...@@ -2020,7 +2022,7 @@ WRPTP shall implement the following implementation-specific features:
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
\includegraphics[width=0.8\textwidth]{../../../figures/protocol/ptpFSM.ps} \includegraphics[width=0.8\textwidth]{protocol/ptpFSM.ps}
\caption{State machine for a full implementation of PTP (Figure 23, IEEE1588).} \caption{State machine for a full implementation of PTP (Figure 23, IEEE1588).}
\label{fig:ptpFSM} \label{fig:ptpFSM}
\end{figure} \end{figure}
...@@ -2181,7 +2183,7 @@ The citation is approved by the author. ...@@ -2181,7 +2183,7 @@ The citation is approved by the author.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=1.0\textwidth]{../../../figures/protocol/wrMSGsExchangeFlow.ps} \includegraphics[width=1.0\textwidth]{protocol/wrMSGsExchangeFlow.ps}
\caption{Typical flow of events (no exceptions) during WR Link Setup.} \caption{Typical flow of events (no exceptions) during WR Link Setup.}
\label{fig:wrFSMcommun} \label{fig:wrFSMcommun}
\end{figure} \end{figure}
...@@ -2194,7 +2196,7 @@ The citation is approved by the author. ...@@ -2194,7 +2196,7 @@ The citation is approved by the author.
\begin{figure}[ht!] \begin{figure}[ht!]
\centering \centering
% \vspace{-1.3cm} % \vspace{-1.3cm}
\includegraphics[width=1.0\textwidth]{../../../figures/protocol/ptpAndWrFSMs.ps} \includegraphics[width=1.0\textwidth]{protocol/ptpAndWrFSMs.ps}
\caption{PTP and WR FSMs from POWER ON use case} \caption{PTP and WR FSMs from POWER ON use case}
\label{fig:wrFSMcommun} \label{fig:wrFSMcommun}
\end{figure} \end{figure}
......
documents/specifications/robustness/robustness_doc/app10.tex
View file @ 4af4136f
...@@ -2,7 +2,7 @@ ...@@ -2,7 +2,7 @@
\label{appH} \label{appH}
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/switchRouting.ps} \includegraphics[scale=0.30]{robustness/switchRouting.ps}
\captionof{figure}{WR Switch routing using Swcore and RTU (not to \captionof{figure}{WR Switch routing using Swcore and RTU (not to
scale).} scale).}
\label{fig:swRouting} \label{fig:swRouting}
......
documents/specifications/robustness/robustness_doc/app3.tex
View file @ 4af4136f
...@@ -80,7 +80,7 @@ Backup & Designated \\ \hline ...@@ -80,7 +80,7 @@ Backup & Designated \\ \hline
\end{table} \end{table}
\begin{center} \begin{center}
\includegraphics[scale=0.20]{../../../../figures/robustness/wrRSTP.ps} \includegraphics[scale=0.20]{robustness/wrRSTP.ps}
\captionof{figure}{WR RSTP for HP Traffic} \captionof{figure}{WR RSTP for HP Traffic}
\label{fig:wrRSTP} \label{fig:wrRSTP}
\end{center} \end{center}
documents/specifications/robustness/robustness_doc/app4.tex
View file @ 4af4136f
...@@ -13,7 +13,7 @@ Designated Switched, which forwards packets from the LAN toward the root bridge, ...@@ -13,7 +13,7 @@ Designated Switched, which forwards packets from the LAN toward the root bridge,
and vice versa. and vice versa.
\begin{center} \begin{center}
\includegraphics[scale=0.20 ]{../../../../figures/robustness/network_beginning.ps} \includegraphics[scale=0.20 ]{robustness/network_beginning.ps}
\captionof{figure}{Redundant Network with Loops} \captionof{figure}{Redundant Network with Loops}
\label{fig:redunt_net} \label{fig:redunt_net}
\end{center} \end{center}
...@@ -53,7 +53,7 @@ Alternate or Backup Port. ...@@ -53,7 +53,7 @@ Alternate or Backup Port.
\begin{center} \begin{center}
\includegraphics[scale=0.20 ]{../../../../figures/robustness/network_spanning.ps} \includegraphics[scale=0.20 ]{robustness/network_spanning.ps}
\captionof{figure}{Free-Loops Network} \captionof{figure}{Free-Loops Network}
\label{fig:free_loops} \label{fig:free_loops}
\end{center} \end{center}
...@@ -92,7 +92,7 @@ Designated Switched, which forwards packets from the LAN toward the root bridge, ...@@ -92,7 +92,7 @@ Designated Switched, which forwards packets from the LAN toward the root bridge,
and vice versa. and vice versa.
\begin{center} \begin{center}
\includegraphics[scale=0.20 ]{../../../../figures/robustness/network_beginning.ps} \includegraphics[scale=0.20 ]{robustness/network_beginning.ps}
\captionof{figure}{Redundant Network with Loops} \captionof{figure}{Redundant Network with Loops}
\label{fig:redunt_net} \label{fig:redunt_net}
\end{center} \end{center}
...@@ -132,7 +132,7 @@ Alternate or Backup Port. ...@@ -132,7 +132,7 @@ Alternate or Backup Port.
\begin{center} \begin{center}
\includegraphics[scale=0.20 ]{../../../../figures/robustness/network_spanning.ps} \includegraphics[scale=0.20 ]{robustness/network_spanning.ps}
\captionof{figure}{Free-Loops Network} \captionof{figure}{Free-Loops Network}
\label{fig:free_loops} \label{fig:free_loops}
\end{center} \end{center}
...@@ -219,7 +219,7 @@ out its ports. Though not strictly necessary in this case, they cause no ill ...@@ -219,7 +219,7 @@ out its ports. Though not strictly necessary in this case, they cause no ill
effects. effects.
\begin{center} \begin{center}
\includegraphics[scale=0.70 ]{../../../../figures/robustness/dual_link.ps} \includegraphics[scale=0.70 ]{robustness/dual_link.ps}
\captionof{figure}{Convergence Dual Link Topology} \captionof{figure}{Convergence Dual Link Topology}
\label{fig:idual_link} \label{fig:idual_link}
\end{center} \end{center}
...@@ -239,7 +239,7 @@ bounces back and goes till C to adapt to the new information and will declare ...@@ -239,7 +239,7 @@ bounces back and goes till C to adapt to the new information and will declare
the designated port as root port. the designated port as root port.
\begin{center} \begin{center}
\includegraphics[scale=0.70 ]{../../../../figures/robustness/indirect_change_explamation.ps} \includegraphics[scale=0.70 ]{robustness/indirect_change_explamation.ps}
\captionof{figure}{Convergence Indirect Change of Topology} \captionof{figure}{Convergence Indirect Change of Topology}
\label{fig:indirect_change} \label{fig:indirect_change}
\end{center} \end{center}
...@@ -247,44 +247,44 @@ the designated port as root port. ...@@ -247,44 +247,44 @@ the designated port as root port.
\section{White Rabbit RSTP Use Cases} \section{White Rabbit RSTP Use Cases}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPforHP.ps} \includegraphics[scale=0.40]{robustness/WRRSTPforHP.ps}
\captionof{figure}{Some topology of the network and the bit we are \captionof{figure}{Some topology of the network and the bit we are
considering.} considering.}
\label{fig:WRRSTPforHP} \label{fig:WRRSTPforHP}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPforHP2.ps} \includegraphics[scale=0.40]{robustness/WRRSTPforHP2.ps}
\captionof{figure}{The considered fragment of the network.} \captionof{figure}{The considered fragment of the network.}
\label{fig:WRRSTPforHP2} \label{fig:WRRSTPforHP2}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPcase1.ps} \includegraphics[scale=0.40]{robustness/WRRSTPcase1.ps}
\captionof{figure}{Link failure Use Case.} \captionof{figure}{Link failure Use Case.}
\label{fig:WRRSTPcase1} \label{fig:WRRSTPcase1}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPcase2.ps} \includegraphics[scale=0.40]{robustness/WRRSTPcase2.ps}
\captionof{figure}{Switch failure Use Case.} \captionof{figure}{Switch failure Use Case.}
\label{fig:WRRSTPcase2} \label{fig:WRRSTPcase2}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPcase3.ps} \includegraphics[scale=0.40]{robustness/WRRSTPcase3.ps}
\captionof{figure}{Link failure Use Case.} \captionof{figure}{Link failure Use Case.}
\label{fig:WRRSTPcase3} \label{fig:WRRSTPcase3}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPcase4.ps} \includegraphics[scale=0.40]{robustness/WRRSTPcase4.ps}
\captionof{figure}{Failure of the switch connected to Data Master Node \captionof{figure}{Failure of the switch connected to Data Master Node
(assuming flawless switching to backup Data Master.} (assuming flawless switching to backup Data Master.}
\label{fig:WRRSTPcase4} \label{fig:WRRSTPcase4}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/WRRSTPcase5.ps} \includegraphics[scale=0.40]{robustness/WRRSTPcase5.ps}
\captionof{figure}{Link Failure between switches connected to \captionof{figure}{Link Failure between switches connected to
Master Node and backup Master Node} Master Node and backup Master Node}
\label{fig:WRRSTPcase5} \label{fig:WRRSTPcase5}
......
documents/specifications/robustness/robustness_doc/app6.tex
View file @ 4af4136f
...@@ -254,7 +254,7 @@ it is necessary to multiply the received vector of $n$ block code by the $n \tim ...@@ -254,7 +254,7 @@ it is necessary to multiply the received vector of $n$ block code by the $n \tim
\subsection{WR FEC Graps in CERN Network} \subsection{WR FEC Graps in CERN Network}
\begin{center} \begin{center}
\includegraphics[scale=0.60]{../../../../figures/robustness/P_error_control_msg_CERN.ps} \includegraphics[scale=0.60]{robustness/P_error_control_msg_CERN.ps}
\captionof{figure}{Probability of Losing a Control Message} \captionof{figure}{Probability of Losing a Control Message}
\label{fig:wrRSTPtopologies} \label{fig:wrRSTPtopologies}
\end{center} \end{center}
...@@ -263,7 +263,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s ...@@ -263,7 +263,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s
\begin{center} \begin{center}
\includegraphics[scale=0.60]{../../../../figures/robustness/overhead_cern.ps} \includegraphics[scale=0.60]{robustness/overhead_cern.ps}
\captionof{figure}{Overhead introduced by the WR FEC Scheme} \captionof{figure}{Overhead introduced by the WR FEC Scheme}
\label{fig:wrRSTPtopologies} \label{fig:wrRSTPtopologies}
\end{center} \end{center}
...@@ -274,7 +274,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s ...@@ -274,7 +274,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s
\begin{center} \begin{center}
\includegraphics[scale=0.60]{../../../../figures/robustness/P_error_control_msg_GSI.ps} \includegraphics[scale=0.60]{robustness/P_error_control_msg_GSI.ps}
\captionof{figure}{Probability of Losing a Control Message} \captionof{figure}{Probability of Losing a Control Message}
\label{fig:wrRSTPtopologies} \label{fig:wrRSTPtopologies}
\end{center} \end{center}
...@@ -283,7 +283,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s ...@@ -283,7 +283,7 @@ The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a s
The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a simple repetition code. The Figure ~\ref{fig:wrRSTPtopologies} compares the FEC scheme proposed with a simple repetition code.
\begin{center} \begin{center}
\includegraphics[scale=0.60]{../../../../figures/robustness/overhead_gsi.ps} \includegraphics[scale=0.60]{robustness/overhead_gsi.ps}
\captionof{figure}{Overhead introduced by the WR FEC Scheme} \captionof{figure}{Overhead introduced by the WR FEC Scheme}
\label{fig:wrRSTPtopologies} \label{fig:wrRSTPtopologies}
\end{center} \end{center}
......
documents/specifications/robustness/robustness_doc/chap2.tex
View file @ 4af4136f
...@@ -42,7 +42,7 @@ implementation of WR Switches and suggest improvements to help achieve the ...@@ -42,7 +42,7 @@ implementation of WR Switches and suggest improvements to help achieve the
demanding requirements. demanding requirements.
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/switchRouting.ps} \includegraphics[scale=0.30]{robustness/switchRouting.ps}
\captionof{figure}{WR Switch routing using Swcore and RTU (not to \captionof{figure}{WR Switch routing using Swcore and RTU (not to
scale).} scale).}
\label{fig:swRouting} \label{fig:swRouting}
...@@ -70,7 +70,7 @@ minimum level. The same applies to the rest of CoS. ...@@ -70,7 +70,7 @@ minimum level. The same applies to the rest of CoS.
\begin{figure}[!ht] \begin{figure}[!ht]
\centering \centering
\includegraphics[scale=0.30]{../../../../figures/robustness/VLAN_Tag_GigaPeek.ps} \includegraphics[scale=0.30]{robustness/VLAN_Tag_GigaPeek.ps}
\caption{VLAN Tags} \caption{VLAN Tags}
\label{fig:VLAN_Tag} \label{fig:VLAN_Tag}
\end{figure} \end{figure}
...@@ -181,7 +181,7 @@ of \HP\ Packages}& \textbf{Transmission Time of \HP\ Package}\\ \hline ...@@ -181,7 +181,7 @@ of \HP\ Packages}& \textbf{Transmission Time of \HP\ Package}\\ \hline
\end{table} \end{table}
\begin{center} \begin{center}
\includegraphics[scale=0.35]{../../../../figures/robustness/CMdelayStandard.ps} \includegraphics[scale=0.35]{robustness/CMdelayStandard.ps}
\captionof{figure}{Delivery Delay of \ControlMessage\ (not to scale), \captionof{figure}{Delivery Delay of \ControlMessage\ (not to scale),
for description how the numbers were obtained, see Appendix~\ref{appH}.} for description how the numbers were obtained, see Appendix~\ref{appH}.}
\label{fig:CMdelayStandard} \label{fig:CMdelayStandard}
...@@ -275,7 +275,7 @@ called ...@@ -275,7 +275,7 @@ called
\StandardPriority\ Packages (\SP\ Packages). \StandardPriority\ Packages (\SP\ Packages).
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/SWhpRouting.ps} \includegraphics[scale=0.30]{robustness/SWhpRouting.ps}
\captionof{figure}{Difference between \HP\ and \SP\ Routing (not to \captionof{figure}{Difference between \HP\ and \SP\ Routing (not to
scale).} scale).}
\label{fig:swhprouting} \label{fig:swhprouting}
...@@ -329,7 +329,7 @@ Master, thus they have precedence over \HP\ Packages received from downlink ...@@ -329,7 +329,7 @@ Master, thus they have precedence over \HP\ Packages received from downlink
port. port.
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/hpRouting.ps} \includegraphics[scale=0.30]{robustness/hpRouting.ps}
\captionof{figure}{Algorithm for routing \HP\ Traffic.} \captionof{figure}{Algorithm for routing \HP\ Traffic.}
\label{fig:timePaths} \label{fig:timePaths}
\end{center} \end{center}
...@@ -360,7 +360,7 @@ Delivery Delay}}\\ ...@@ -360,7 +360,7 @@ Delivery Delay}}\\
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/CMdelayHP.ps} \includegraphics[scale=0.30]{robustness/CMdelayHP.ps}
\captionof{figure}{Delivery Delay of \ControlMessage\ using \HP\ \captionof{figure}{Delivery Delay of \ControlMessage\ using \HP\
Bypass.} Bypass.}
\label{fig:CMdelayHP} \label{fig:CMdelayHP}
......
documents/specifications/robustness/robustness_doc/chap3.tex
View file @ 4af4136f
...@@ -57,7 +57,7 @@ mentioned before, WR Timing Slave Switch can be connected to up to two links ...@@ -57,7 +57,7 @@ mentioned before, WR Timing Slave Switch can be connected to up to two links
to up to two WR Timing Master Switches. to up to two WR Timing Master Switches.
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/timePaths.ps} \includegraphics[scale=0.30]{robustness/timePaths.ps}
\captionof{figure}{Possible Timing Paths between WR Switches} \captionof{figure}{Possible Timing Paths between WR Switches}
\label{fig:timePaths} \label{fig:timePaths}
\end{center} \end{center}
...@@ -75,7 +75,7 @@ White Rabbit network will work normally without redundancy ...@@ -75,7 +75,7 @@ White Rabbit network will work normally without redundancy
\begin{center} \begin{center}
\includegraphics[scale=0.20]{../../../../figures/robustness/layer1redundancy.ps} \includegraphics[scale=0.20]{robustness/layer1redundancy.ps}
\captionof{figure}{Clock Path Redundancy} \captionof{figure}{Clock Path Redundancy}
\label{fig:clockRedundancy} \label{fig:clockRedundancy}
\end{center} \end{center}
......
documents/specifications/robustness/robustness_doc/chap4.tex
View file @ 4af4136f
...@@ -170,7 +170,7 @@ The above restrictions greatly overlap with restrictions imposed by the ...@@ -170,7 +170,7 @@ The above restrictions greatly overlap with restrictions imposed by the
Timing Path Redundancy. Timing Path Redundancy.
\begin{center} \begin{center}
\includegraphics[scale=0.30]{../../../../figures/robustness/wrRSTPtopologies.ps} \includegraphics[scale=0.30]{robustness/wrRSTPtopologies.ps}
\captionof{figure}{Example of topologies including WR restrictions to \captionof{figure}{Example of topologies including WR restrictions to
RSTP, highlighting connections between Backup Root Switch, Root Switch and Data RSTP, highlighting connections between Backup Root Switch, Root Switch and Data
Master(s) Nodes.} Master(s) Nodes.}
...@@ -302,7 +302,7 @@ bit was not received ("erased"). To overcome the loss of frames and erasures in ...@@ -302,7 +302,7 @@ bit was not received ("erased"). To overcome the loss of frames and erasures in
the frames, two concatenated FECs should be used. the frames, two concatenated FECs should be used.
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/channels.ps} \includegraphics[scale=0.40]{robustness/channels.ps}
\captionof{figure}{PEC and BEC in a WR Network} \captionof{figure}{PEC and BEC in a WR Network}
\label{fig:wr_channels} \label{fig:wr_channels}
\end{center} \end{center}
...@@ -371,7 +371,7 @@ For the shortest payload of an Ethernet frame, 46 bytes, the code will introduce ...@@ -371,7 +371,7 @@ For the shortest payload of an Ethernet frame, 46 bytes, the code will introduce
9 parity bits, and for the longest, 1500 bytes, 14 bits. 9 parity bits, and for the longest, 1500 bytes, 14 bits.
\begin{center} \begin{center}
\includegraphics[scale=0.50]{../../../../figures/robustness/hamming.ps} \includegraphics[scale=0.50]{robustness/hamming.ps}
\captionof{figure}{Number of Parity-Check bits for a given Control Message } \captionof{figure}{Number of Parity-Check bits for a given Control Message }
\label{fig:Hamming} \label{fig:Hamming}
\end{center} \end{center}
...@@ -510,7 +510,7 @@ of the payload of the Ethernet frame a header with the following field: ...@@ -510,7 +510,7 @@ of the payload of the Ethernet frame a header with the following field:
\end{itemize} \end{itemize}
\begin{center} \begin{center}
\includegraphics[scale=0.80]{../../../../figures/robustness/fec_header.ps} \includegraphics[scale=0.80]{robustness/fec_header.ps}
\captionof{figure}{WR FEC Header} \captionof{figure}{WR FEC Header}
\label{fig:fec_header} \label{fig:fec_header}
\end{center} \end{center}
......
documents/specifications/robustness/robustness_doc/chap5.tex
View file @ 4af4136f
...@@ -67,7 +67,7 @@ The relationship between $Delay_{CM}$, $D$ and $N$ is shown in the ...@@ -67,7 +67,7 @@ The relationship between $Delay_{CM}$, $D$ and $N$ is shown in the
Figure~\ref{fig:deliveryDelayChart}. Figure~\ref{fig:deliveryDelayChart}.
\begin{center} \begin{center}
\includegraphics[scale=0.40]{../../../../figures/robustness/deliveryDelayChart.ps} \includegraphics[scale=0.40]{robustness/deliveryDelayChart.ps}
\captionof{figure}{The relationship between $Delay_{CM}$, $D$ and $N$.} \captionof{figure}{The relationship between $Delay_{CM}$, $D$ and $N$.}
\label{fig:deliveryDelayChart} \label{fig:deliveryDelayChart}
\end{center} \end{center}
...@@ -236,7 +236,7 @@ A White Rabbit Network: ...@@ -236,7 +236,7 @@ A White Rabbit Network:
\begin{center} \begin{center}
\includegraphics[scale=0.35]{../../../../figures/network/hierarchy2.ps} \includegraphics[scale=0.35]{network/hierarchy2.ps}
\captionof{figure}{Example WR topology.} \captionof{figure}{Example WR topology.}
\label{fig:WRtopology} \label{fig:WRtopology}
\end{center} \end{center}
...@@ -321,7 +321,7 @@ WR Switch (low reliability) & 20 000 & 0.060 0 \\ \hline ...@@ -321,7 +321,7 @@ WR Switch (low reliability) & 20 000 & 0.060 0 \\ \hline
\begin{center} \begin{center}
\includegraphics[scale=0.35]{../../../../figures/robustness/topologyConsideration.ps} \includegraphics[scale=0.35]{robustness/topologyConsideration.ps}
\captionof{figure}{WR Network Connections to Data Master(s) and \captionof{figure}{WR Network Connections to Data Master(s) and
Receiving Node.} Receiving Node.}
\label{fig:topologyConsideration} \label{fig:topologyConsideration}
...@@ -376,14 +376,14 @@ T3 & 90 & 400 ...@@ -376,14 +376,14 @@ T3 & 90 & 400
\begin{center} \begin{center}
\includegraphics[scale=0.25]{../../../../figures/robustness/threeTopologies.ps} \includegraphics[scale=0.25]{robustness/threeTopologies.ps}
\captionof{figure}{Examples of topologies with different level of \captionof{figure}{Examples of topologies with different level of
redundancy.} redundancy.}
\label{fig:threeTopology} \label{fig:threeTopology}
\end{center} \end{center}
\begin{center} \begin{center}
\includegraphics[scale=0.25]{../../../../figures/robustness/fullyRedundantTopologies.ps} \includegraphics[scale=0.25]{robustness/fullyRedundantTopologies.ps}
\captionof{figure}{Topology examples with double redundancy.} \captionof{figure}{Topology examples with double redundancy.}
\label{fig:fullyRedundantTopologies} \label{fig:fullyRedundantTopologies}
\end{center} \end{center}
......
documents/specifications/robustness/robustness_doc/chap7.tex
View file @ 4af4136f
...@@ -112,7 +112,7 @@ As a consequence the following functionalities shall be provided by WR Network: ...@@ -112,7 +112,7 @@ As a consequence the following functionalities shall be provided by WR Network:
\begin{center} \begin{center}
\includegraphics[scale=0.35]{../../../../figures/robustness/delayMonitoring.ps} \includegraphics[scale=0.35]{robustness/delayMonitoring.ps}
\captionof{figure}{\ControlMessage and \HP Package delivery delay \captionof{figure}{\ControlMessage and \HP Package delivery delay
monitoring.} monitoring.}
\label{fig:pathDelayMonitoring} \label{fig:pathDelayMonitoring}
...@@ -222,7 +222,7 @@ the Non-Critical will carry on the actions explained in this chapter. ...@@ -222,7 +222,7 @@ the Non-Critical will carry on the actions explained in this chapter.
\begin{center} \begin{center}
\includegraphics[scale=0.60 \includegraphics[scale=0.60
]{../../../../figures/robustness/architecture_management_flow_congestion_control.ps} ]{robustness/architecture_management_flow_congestion_control.ps}
\captionof{figure}{Architecture of Flow Monitoring, Congestion and Flow \captionof{figure}{Architecture of Flow Monitoring, Congestion and Flow
Control} Control}
\label{fig:archi} \label{fig:archi}
......
documents/specifications/robustness/robustness_doc/chap8.tex
View file @ 4af4136f
...@@ -9,7 +9,7 @@ Figure~\ref{fig:osiLayers} with reference to the OSI Model. ...@@ -9,7 +9,7 @@ Figure~\ref{fig:osiLayers} with reference to the OSI Model.
\begin{center} \begin{center}
\includegraphics[scale=0.35]{../../../../figures/robustness/osiLayers.ps} \includegraphics[scale=0.35]{robustness/osiLayers.ps}
\captionof{figure}{Placing methods used in WR according to OSI Layers.} \captionof{figure}{Placing methods used in WR according to OSI Layers.}
\label{fig:osiLayers} \label{fig:osiLayers}
\end{center} \end{center}
......
documents/specifications/robustness/robustness_doc/robustness.tex
View file @ 4af4136f
...@@ -74,6 +74,7 @@ ...@@ -74,6 +74,7 @@
\makeatother \makeatother
\graphicspath{ {../../../../figures/} }
\begin{document} \begin{document}
%----------------------------------------------------------- %-----------------------------------------------------------
...@@ -90,7 +91,7 @@ ...@@ -90,7 +91,7 @@
% Upper part of the page % Upper part of the page
%\includegraphics[scale=0.50]{fig/white_rabbit.jpg}\\[1cm] %\includegraphics[scale=0.50]{fig/white_rabbit.jpg}\\[1cm]
%\includegraphics[height=80mm]{white_rabbit.ps}\\[1cm] %\includegraphics[height=80mm]{white_rabbit.ps}\\[1cm]
\includegraphics[height=70mm]{../../../../figures/logo/WRlogo.ps}\\[1cm] \includegraphics[height=70mm]{logo/WRlogo.ps}\\[1cm]
% Title % Title
\HRule \\[0.4cm] \HRule \\[0.4cm]
......
papers/IBIC2013/THBL2.tex
View file @ 4af4136f
...@@ -17,6 +17,8 @@ ...@@ -17,6 +17,8 @@
\usepackage{textcomp} % for \textmu (greek letter mu without the need \usepackage{textcomp} % for \textmu (greek letter mu without the need
% to use Math mode) % to use Math mode)
\graphicspath{ {../../figures/} }
%% %%
%% VARIABLE HEIGHT FOR THE TITLE BOX (default 35mm) %% VARIABLE HEIGHT FOR THE TITLE BOX (default 35mm)
%% %%
...@@ -93,7 +95,7 @@ International Atomic Time (TAI) counter. ...@@ -93,7 +95,7 @@ International Atomic Time (TAI) counter.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/network/hierarchy.eps} \includegraphics*[width=\columnwidth]{network/hierarchy.eps}
\caption{Layout of a typical WR network.} \caption{Layout of a typical WR network.}
\label{hierarchy-fig} \label{hierarchy-fig}
\end{figure} \end{figure}
...@@ -123,7 +125,7 @@ these exchanges. ...@@ -123,7 +125,7 @@ these exchanges.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=0.5\columnwidth]{../../figures/protocol/ptpMSGs-color.eps} \includegraphics*[width=0.5\columnwidth]{protocol/ptpMSGs-color.eps}
\caption{Simplified PTP message exchange diagram.} \caption{Simplified PTP message exchange diagram.}
\label{ptp-fig} \label{ptp-fig}
\end{figure} \end{figure}
...@@ -181,7 +183,7 @@ downlinks). ...@@ -181,7 +183,7 @@ downlinks).
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/misc/eth_vs_synce.eps} \includegraphics*[width=\columnwidth]{misc/eth_vs_synce.eps}
\caption{Simple illustration of layer-1 syntonization.} \caption{Simple illustration of layer-1 syntonization.}
\label{synce-fig} \label{synce-fig}
\end{figure} \end{figure}
...@@ -201,7 +203,7 @@ equation in order to achieve better precision. ...@@ -201,7 +203,7 @@ equation in order to achieve better precision.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/misc/phase_tracking.eps} \includegraphics*[width=\columnwidth]{misc/phase_tracking.eps}
\caption{Phase tracking block diagram.} \caption{Phase tracking block diagram.}
\label{phase-tracking-fig} \label{phase-tracking-fig}
\end{figure} \end{figure}
...@@ -232,7 +234,7 @@ Fig.~\ref{ddmtd-fig}. ...@@ -232,7 +234,7 @@ Fig.~\ref{ddmtd-fig}.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/misc/dmtd2.eps} \includegraphics*[width=\columnwidth]{misc/dmtd2.eps}
\caption{Digital DMTD circuit.} \caption{Digital DMTD circuit.}
\label{ddmtd-fig} \label{ddmtd-fig}
\end{figure} \end{figure}
...@@ -290,7 +292,7 @@ Xilinx Virtex-6 Field Programmable Gate Array (FPGA). ...@@ -290,7 +292,7 @@ Xilinx Virtex-6 Field Programmable Gate Array (FPGA).
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=0.7\columnwidth]{../../figures/switch/switch_simple_diagram.eps} \includegraphics*[width=0.7\columnwidth]{switch/switch_simple_diagram.eps}
\caption{High-level block diagram of the WR switch.} \caption{High-level block diagram of the WR switch.}
\label{switch-top-fig} \label{switch-top-fig}
\end{figure} \end{figure}
...@@ -313,7 +315,7 @@ Wishbone bus~\cite{wishbone-ref} interconnect. ...@@ -313,7 +315,7 @@ Wishbone bus~\cite{wishbone-ref} interconnect.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/switch/switch_hdl_v3.3.eps} \includegraphics*[width=\columnwidth]{switch/switch_hdl_v3.3.eps}
\caption{Block diagram of the FPGA design in the WR switch.} \caption{Block diagram of the FPGA design in the WR switch.}
\label{switch-fpga-fig} \label{switch-fpga-fig}
\end{figure} \end{figure}
...@@ -363,7 +365,7 @@ seen in Fig.~\ref{performance-fig}. ...@@ -363,7 +365,7 @@ seen in Fig.~\ref{performance-fig}.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/measurements/meas_results2.eps} \includegraphics*[width=\columnwidth]{measurements/meas_results2.eps}
\caption{Histograms of PPS output offsets of three cascaded WR \caption{Histograms of PPS output offsets of three cascaded WR
switches with respect to the PPS pulse output in the master switch.} switches with respect to the PPS pulse output in the master switch.}
\label{performance-fig} \label{performance-fig}
...@@ -390,7 +392,7 @@ precise TAI time stamps. ...@@ -390,7 +392,7 @@ precise TAI time stamps.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/node/wrNode.eps} \includegraphics*[width=\columnwidth]{node/wrNode.eps}
\caption{An example WR node.} \caption{An example WR node.}
\label{node-fig} \label{node-fig}
\end{figure} \end{figure}
...@@ -447,7 +449,7 @@ Digital Synthesis (Distributed DDS or D3S). ...@@ -447,7 +449,7 @@ Digital Synthesis (Distributed DDS or D3S).
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/applications/distributed_dds.eps} \includegraphics*[width=\columnwidth]{applications/distributed_dds.eps}
\caption{Distributed DDS in a WR network.} \caption{Distributed DDS in a WR network.}
\label{d3s-fig} \label{d3s-fig}
\end{figure} \end{figure}
...@@ -482,7 +484,7 @@ described so far. ...@@ -482,7 +484,7 @@ described so far.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/applications/distributed_daq.eps} \includegraphics*[width=\columnwidth]{applications/distributed_daq.eps}
\caption{Distributed oscilloscope using a WR network.} \caption{Distributed oscilloscope using a WR network.}
\label{oscilloscope-fig} \label{oscilloscope-fig}
\end{figure} \end{figure}
...@@ -592,7 +594,7 @@ can be important in a WR network. ...@@ -592,7 +594,7 @@ can be important in a WR network.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics*[width=\columnwidth]{../../figures/robustness/FEC.eps} \includegraphics*[width=\columnwidth]{robustness/FEC.eps}
\caption{Forward Error Correction used to correct for frame loss.} \caption{Forward Error Correction used to correct for frame loss.}
\label{fec-fig} \label{fec-fig}
\end{figure} \end{figure}
......
papers/ICALEPCS2011/ClockDistribution.tex
View file @ 4af4136f
...@@ -33,7 +33,7 @@ primary master failure \cite{biblio:TomekMSc}. ...@@ -33,7 +33,7 @@ primary master failure \cite{biblio:TomekMSc}.
\begin{figure}[t] \begin{figure}[t]
\centering \centering
\includegraphics[width=3.2in]{../../figures/robustness/clockDistribution.eps} \includegraphics[width=3.2in]{robustness/clockDistribution.eps}
\caption{Seamless switch-over.} \caption{Seamless switch-over.}
\label{fig:switch-over} \label{fig:switch-over}
\end{figure} \end{figure}
......
papers/ICALEPCS2011/WhiteRabbit.tex
View file @ 4af4136f
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
\hyphenation{op-tical net-works semi-conduc-tor} \hyphenation{op-tical net-works semi-conduc-tor}
\graphicspath{ {../../figures/} }
%\newcommand \modified[1]{{\textcolor{red}{#1}}} %\newcommand \modified[1]{{\textcolor{red}{#1}}}
......
papers/ICALEPCS2011_PEER_REVIEWED/ClockDistribution.tex
View file @ 4af4136f
...@@ -33,7 +33,7 @@ primary master failure \cite{biblio:TomekMSc}. ...@@ -33,7 +33,7 @@ primary master failure \cite{biblio:TomekMSc}.
\begin{figure}[t] \begin{figure}[t]
\centering \centering
\includegraphics[width=3.2in]{../../figures/robustness/clockDistribution.eps} \includegraphics[width=3.2in]{robustness/clockDistribution.eps}
\caption{Seamless switch-over.} \caption{Seamless switch-over.}
\label{fig:switch-over} \label{fig:switch-over}
\end{figure} \end{figure}
......
papers/ICALEPCS2011_PEER_REVIEWED/WhiteRabbit.tex
View file @ 4af4136f
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
\hyphenation{op-tical net-works semi-conduc-tor} \hyphenation{op-tical net-works semi-conduc-tor}
\graphicspath{ {../../figures/} }
%\newcommand \modified[1]{{\textcolor{red}{#1}}} %\newcommand \modified[1]{{\textcolor{red}{#1}}}
......
papers/ISPCS2011/WhiteRabbit.tex
View file @ 4af4136f
...@@ -57,6 +57,8 @@ ...@@ -57,6 +57,8 @@
\hyphenation{op-tical net-works semi-conduc-tor} \hyphenation{op-tical net-works semi-conduc-tor}
\graphicspath{ {../../figures/} }
\begin{document} \begin{document}
\title{White Rabbit: a PTP Application for Robust Sub-nanosecond Synchronization} \title{White Rabbit: a PTP Application for Robust Sub-nanosecond Synchronization}
......
papers/ISPCS2011/hwSupport.tex
View file @ 4af4136f
...@@ -77,7 +77,7 @@ The modified timestamps are used to calculate the precise round-trip delay ...@@ -77,7 +77,7 @@ The modified timestamps are used to calculate the precise round-trip delay
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
%\includegraphics[width=2.95in]{fig/wrCRS.eps} %\includegraphics[width=2.95in]{fig/wrCRS.eps}
\includegraphics[height=0.95in]{../../figures/robustness/wrCRS.eps} \includegraphics[height=0.95in]{robustness/wrCRS.eps}
\caption{\modified{White Rabbit Clock Recovery System.}} \caption{\modified{White Rabbit Clock Recovery System.}}
\label{fig:PLL} \label{fig:PLL}
\end{figure} \end{figure}
...@@ -136,7 +136,7 @@ guaranteed during the switch-over. ...@@ -136,7 +136,7 @@ guaranteed during the switch-over.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
%\includegraphics[width=1.74in]{fig/calibration.eps} %\includegraphics[width=1.74in]{fig/calibration.eps}
\includegraphics[height=0.95in]{../../figures/misc/calibration.eps} \includegraphics[height=0.95in]{misc/calibration.eps}
\caption{\modified{Rx/Tx latency measurement \cite{biblio:WRPTP}. }} \caption{\modified{Rx/Tx latency measurement \cite{biblio:WRPTP}. }}
\label{fig:calibration} \label{fig:calibration}
\end{figure} \end{figure}
......
papers/ISPCS2011/introduction.tex
View file @ 4af4136f
...@@ -44,7 +44,7 @@ synchronized with the required accuracy and the data must always be ...@@ -44,7 +44,7 @@ synchronized with the required accuracy and the data must always be
delivered on time. delivered on time.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[height=2.10in]{../../figures/network/hierarchy.eps} \includegraphics[height=2.10in]{network/hierarchy.eps}
\caption{A White Rabbit Network \cite{biblio:TomekMSc}.} \caption{A White Rabbit Network \cite{biblio:TomekMSc}.}
\label{fig:WRnetwork} \label{fig:WRnetwork}
\end{figure} \end{figure}
......
papers/ISPCS2011/testResults.tex
View file @ 4af4136f
...@@ -10,7 +10,7 @@ by heating the fiber with a hot air gun. ...@@ -10,7 +10,7 @@ by heating the fiber with a hot air gun.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
%\includegraphics[width=2.0in]{fig/measSystem.ps} %\includegraphics[width=2.0in]{fig/measSystem.ps}
\includegraphics[width=1.6in]{../../figures/measurements/measSystem.ps} \includegraphics[width=1.6in]{measurements/measSystem.ps}
\caption{Test setup.} \caption{Test setup.}
\label{fig:testSetup} \label{fig:testSetup}
\end{figure} \end{figure}
...@@ -39,7 +39,7 @@ to the fast heating provided by the hot air gun. ...@@ -39,7 +39,7 @@ to the fast heating provided by the hot air gun.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
%\includegraphics[width=2.3in]{fig/cascadedMeas.eps} %\includegraphics[width=2.3in]{fig/cascadedMeas.eps}
\includegraphics[width=3.4in]{../../figures/measurements/measResults-new.eps} \includegraphics[width=3.4in]{measurements/measResults-new.eps}
\caption{\modified{Synchronization performance.}} \caption{\modified{Synchronization performance.}}
\label{fig:offset} \label{fig:offset}
\end{figure} \end{figure}
......
papers/ISPCS2011/wrptp.tex
View file @ 4af4136f
...@@ -15,7 +15,7 @@ functionalities and staying PTP-compatible. ...@@ -15,7 +15,7 @@ functionalities and staying PTP-compatible.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=3.15in]{../../figures/protocol/wrptpMSGs.eps} \includegraphics[width=3.15in]{protocol/wrptpMSGs.eps}
\caption{\modified{Simplified overview of the message flow in WRPTP.}} \caption{\modified{Simplified overview of the message flow in WRPTP.}}
\label{fig:wrptpMSGs} \label{fig:wrptpMSGs}
\end{figure} \end{figure}
...@@ -70,7 +70,7 @@ and described below: ...@@ -70,7 +70,7 @@ and described below:
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=3.1in]{../../figures/protocol/wrLink2.eps} \includegraphics[width=3.1in]{protocol/wrLink2.eps}
\caption{WR Link \modified{Delay} Model, synchronization and syntonization scheme.} \caption{WR Link \modified{Delay} Model, synchronization and syntonization scheme.}
\label{fig:wrLink} \label{fig:wrLink}
\end{figure} \end{figure}
...@@ -297,7 +297,7 @@ presented in \figurename~\ref{fig:wrptpMSGs}. ...@@ -297,7 +297,7 @@ presented in \figurename~\ref{fig:wrptpMSGs}.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=3.1in]{../../figures/protocol/wrFSM.eps} \includegraphics[width=3.1in]{protocol/wrFSM.eps}
\caption{\modified{WR state machine \cite{biblio:WRPTP}.}} \caption{\modified{WR state machine \cite{biblio:WRPTP}.}}
\label{fig:wrFSM} \label{fig:wrFSM}
\end{figure} \end{figure}
......
papers/ISPCS2012/WhiteRabbit.tex
View file @ 4af4136f
...@@ -59,6 +59,8 @@ ...@@ -59,6 +59,8 @@
%\renewcommand{\thefootnote}{\alph{footnote}} %\renewcommand{\thefootnote}{\alph{footnote}}
\hyphenation{op-tical net-works semi-conduc-tor} \hyphenation{op-tical net-works semi-conduc-tor}
\graphicspath{ {../../figures/} }
\begin{document} \begin{document}
\title{Performance results of the first White Rabbit installation for CNGS \title{Performance results of the first White Rabbit installation for CNGS
......
papers/ISPCS2012/dataAnalysis.tex
View file @ 4af4136f
...@@ -88,7 +88,7 @@ $x_{diff-offset}$. ...@@ -88,7 +88,7 @@ $x_{diff-offset}$.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.5\textwidth]{../../figures/measurements/histogram-small.eps} \includegraphics[width=0.5\textwidth]{measurements/histogram-small.eps}
% \caption{A plot of the Time Error data with removed offset % \caption{A plot of the Time Error data with removed offset
% ($x_{lo}$, $x_{lb}$ and $x_{diff-offset}$) and a histogram of the difference between timestamps % ($x_{lo}$, $x_{lb}$ and $x_{diff-offset}$) and a histogram of the difference between timestamps
% acquired by the two SPECs ($x_{diff}$) which reflects system's performance.} % acquired by the two SPECs ($x_{diff}$) which reflects system's performance.}
...@@ -116,7 +116,7 @@ The Overlapping Allan Deviation calculated from the collected data is presented ...@@ -116,7 +116,7 @@ The Overlapping Allan Deviation calculated from the collected data is presented
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.4\textwidth]{../../figures/measurements/cngs_oADEV3.eps} \includegraphics[width=0.4\textwidth]{measurements/cngs_oADEV3.eps}
\caption{Overlapping Allan Deviation.} \caption{Overlapping Allan Deviation.}
\label{fig:oADEV} \label{fig:oADEV}
\end{figure} \end{figure}
...@@ -155,7 +155,7 @@ as temperature fluctuation. ...@@ -155,7 +155,7 @@ as temperature fluctuation.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.4\textwidth]{../../figures/measurements/MTIE2.eps} \includegraphics[width=0.4\textwidth]{measurements/MTIE2.eps}
\caption{Maximum Time Interval Error (MTIE).} \caption{Maximum Time Interval Error (MTIE).}
\label{fig:MTIE} \label{fig:MTIE}
\end{figure} \end{figure}
...@@ -174,7 +174,7 @@ shows differential TE values ($x_{diff}$) which do not reveal noticeable changes ...@@ -174,7 +174,7 @@ shows differential TE values ($x_{diff}$) which do not reveal noticeable changes
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.4\textwidth]{../../figures/measurements/cngs_temp.vs.TE.eps} \includegraphics[width=0.4\textwidth]{measurements/cngs_temp.vs.TE.eps}
\caption{Time Error versus temperature in WR Room.} \caption{Time Error versus temperature in WR Room.}
\label{fig:temp.vs.TE} \label{fig:temp.vs.TE}
\end{figure} \end{figure}
...@@ -201,7 +201,7 @@ related with WR network (e.g. 10~MHz Fanout, \figurename~\ref{fig:wrLNGStiming}) ...@@ -201,7 +201,7 @@ related with WR network (e.g. 10~MHz Fanout, \figurename~\ref{fig:wrLNGStiming})
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.5\textwidth]{../../figures/measurements/cngs_temp.vs.filteredTE3.eps} \includegraphics[width=0.5\textwidth]{measurements/cngs_temp.vs.filteredTE3.eps}
\caption{Time Error (after applying 30 min average filter and smoothing) versus temperature in WR Room.} \caption{Time Error (after applying 30 min average filter and smoothing) versus temperature in WR Room.}
\label{fig:temp.vs.filteredTE} \label{fig:temp.vs.filteredTE}
\end{figure} \end{figure}
...@@ -252,7 +252,7 @@ The following parameters were monitored: ...@@ -252,7 +252,7 @@ The following parameters were monitored:
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.5\textwidth]{../../figures/measurements/cngs_reference.eps} \includegraphics[width=0.5\textwidth]{measurements/cngs_reference.eps}
\caption{\textbf{TEST 1}: parameters of the system in constant temperature (20 degrees Celsius).} \caption{\textbf{TEST 1}: parameters of the system in constant temperature (20 degrees Celsius).}
\label{fig:chamber-ref} \label{fig:chamber-ref}
\end{figure} \end{figure}
...@@ -266,7 +266,7 @@ system parameters are depicted in the column \textbf{TEST~1} of Table~\ref{tab:d ...@@ -266,7 +266,7 @@ system parameters are depicted in the column \textbf{TEST~1} of Table~\ref{tab:d
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[width=0.5\textwidth]{../../figures/measurements/chamber-test.eps} \includegraphics[width=0.5\textwidth]{measurements/chamber-test.eps}
\caption{\textbf{TEST 2:} system performance when changing temperature of both SPECs.} \caption{\textbf{TEST 2:} system performance when changing temperature of both SPECs.}
\label{fig:chamber-test} \label{fig:chamber-test}
\end{figure} \end{figure}
......
papers/ISPCS2012/introduction.tex
View file @ 4af4136f
...@@ -46,7 +46,7 @@ in Section~\ref{sec:conclusions}. ...@@ -46,7 +46,7 @@ in Section~\ref{sec:conclusions}.
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
%\includegraphics[width=2.95in]{fig/wrCRS.eps} %\includegraphics[width=2.95in]{fig/wrCRS.eps}
\includegraphics[height=2.9in]{../../figures/applications/OperaTiming2.eps} \includegraphics[height=2.9in]{applications/OperaTiming2.eps}
\caption{Schematic of the OPERA timing system at LNGS. Blue delays include elements of the \caption{Schematic of the OPERA timing system at LNGS. Blue delays include elements of the
timestamp distribution. Green delays indicate detector time-response. timestamp distribution. Green delays indicate detector time-response.
Orange boxes refer to elements of the old CNGS-OPERA synchronization system (\cite{biblio:TOF}). Orange boxes refer to elements of the old CNGS-OPERA synchronization system (\cite{biblio:TOF}).
......
papers/ISPCS2012/measSetup.tex
View file @ 4af4136f
...@@ -28,7 +28,7 @@ time source connected to the grandmaster switch. This capability is used in the ...@@ -28,7 +28,7 @@ time source connected to the grandmaster switch. This capability is used in the
\begin{figure}[!t] \begin{figure}[!t]
\centering \centering
\includegraphics[height=4.0in]{../../figures/applications/CNGS2.eps} \includegraphics[height=4.0in]{applications/CNGS2.eps}
\caption{White Rabbit based synchronization system in Gran Sasso National Laboratory (LNGS).} \caption{White Rabbit based synchronization system in Gran Sasso National Laboratory (LNGS).}
\label{fig:wrLNGStiming} \label{fig:wrLNGStiming}
\end{figure} \end{figure}
......
presentations/WR-Spec-v2_Maciej_WorkshopSept2011/WhiteRabbit.tex
View file @ 4af4136f
...@@ -53,6 +53,8 @@ ...@@ -53,6 +53,8 @@
%\usepackage{hyperref} %\usepackage{hyperref}
%%%%%%% %%%%%%%
\graphicspath{ {../../figures/} }
% greetings, introduce yourself % greetings, introduce yourself
...@@ -118,7 +120,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -118,7 +120,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\end{itemize} \end{itemize}
\begin{center} \begin{center}
\includegraphics[height=3cm]{../../figures/protocol/wrLink.ps} \includegraphics[height=3cm]{protocol/wrLink.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -129,7 +131,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -129,7 +131,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\center A White Rabbit Network \center A White Rabbit Network
\begin{center} \begin{center}
\includegraphics[width=11.5cm]{../../figures/network/wrTopology.eps} \includegraphics[width=11.5cm]{network/wrTopology.eps}
\end{center} \end{center}
\end{frame} \end{frame}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
...@@ -148,7 +150,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -148,7 +150,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\end{itemize} \end{itemize}
\column{1.5in} \column{1.5in}
\includegraphics[height=5.5cm]{../../figures/protocol/ptpMSGs.ps} \\ \includegraphics[height=5.5cm]{protocol/ptpMSGs.ps} \\
\small \small
one-way mean delay: \\ one-way mean delay: \\
$\mu = \frac{(t_{4}-t_{1}) - (t_{3}-t_{2})}{2}$ \\ $\mu = \frac{(t_{4}-t_{1}) - (t_{3}-t_{2})}{2}$ \\
...@@ -199,7 +201,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -199,7 +201,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\vspace{0.2cm} \vspace{0.2cm}
\begin{center} \begin{center}
\includegraphics[height=2.5cm]{../../figures/protocol/delaymodel.eps} \includegraphics[height=2.5cm]{protocol/delaymodel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -227,7 +229,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -227,7 +229,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Link Delay Model: fiber optic solution} \begin{frame}{Link Delay Model: fiber optic solution}
\begin{center} \begin{center}
\includegraphics[height=4cm]{../../figures/protocol/wrLinkModel.eps} \includegraphics[height=4cm]{protocol/wrLinkModel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -272,7 +274,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -272,7 +274,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{} % \subsection{}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\setbeamertemplate{background}{\includegraphics[width=\paperwidth]{../../figures/protocol/wrLinkModel-fdm2.ps}} \setbeamertemplate{background}{\includegraphics[width=\paperwidth]{protocol/wrLinkModel-fdm2.ps}}
\logo{} \logo{}
\begin{frame}{Fine Delay Measurement} \begin{frame}{Fine Delay Measurement}
...@@ -287,7 +289,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -287,7 +289,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fine Delay Measurement} \begin{frame}{Fine Delay Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/protocol/link_model.eps} \includegraphics[width=10.0cm]{protocol/link_model.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -295,7 +297,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -295,7 +297,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsection{} %\subsection{}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\setbeamertemplate{background}{\includegraphics[width=\paperwidth]{../../figures/protocol/wrLinkModel-fd.ps}} \setbeamertemplate{background}{\includegraphics[width=\paperwidth]{protocol/wrLinkModel-fd.ps}}
\logo{} \logo{}
\begin{frame}{Fixed Delays Measurement} \begin{frame}{Fixed Delays Measurement}
...@@ -310,7 +312,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -310,7 +312,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fixed Delays Measurement} \begin{frame}{Fixed Delays Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/misc/calibration.eps} \includegraphics[width=10.0cm]{misc/calibration.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -342,7 +344,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -342,7 +344,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/WR-peer_recognision-1.eps} \includegraphics[width=5.5cm]{protocol/WR-peer_recognision-1.eps}
\end{center} \end{center}
\column{.5\textwidth} \column{.5\textwidth}
...@@ -380,13 +382,13 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -380,13 +382,13 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/WR-peer_recognision-1.eps} \includegraphics[width=5.5cm]{protocol/WR-peer_recognision-1.eps}
\end{center} \end{center}
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/WR-peer_recognision-2.eps} \includegraphics[width=5.5cm]{protocol/WR-peer_recognision-2.eps}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -401,7 +403,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -401,7 +403,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/wrLinkSetup.eps} \includegraphics[width=5.5cm]{protocol/wrLinkSetup.eps}
\end{center} \end{center}
...@@ -424,7 +426,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -424,7 +426,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{WR Link Setup} \begin{frame}{WR Link Setup}
\begin{center} \begin{center}
\includegraphics[width=9.5cm]{../../figures/protocol/wrLinkSetupFSM.eps} \includegraphics[width=9.5cm]{protocol/wrLinkSetupFSM.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -449,7 +451,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -449,7 +451,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[height=5.5cm]{../../figures/protocol/mBMCvsBMC.eps} \includegraphics[height=5.5cm]{protocol/mBMCvsBMC.eps}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -464,7 +466,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -464,7 +466,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%{\it [problem with a presentation flow]} %{\it [problem with a presentation flow]}
\begin{center} \begin{center}
\includegraphics[width=11.8cm]{../../figures/protocol/wrCRS_plus_mBMC.eps} \includegraphics[width=11.8cm]{protocol/wrCRS_plus_mBMC.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -636,7 +638,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -636,7 +638,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{center} \begin{center}
% \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps} % \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps}
% \includegraphics[height=4.0cm]{fig/WRlogo.ps} % \includegraphics[height=4.0cm]{fig/WRlogo.ps}
\includegraphics[height=3.0cm]{../../figures/misc/white_rabbit_end.eps} \includegraphics[height=3.0cm]{misc/white_rabbit_end.eps}
\end{center} \end{center}
\end{frame} \end{frame}
......
presentations/WR_Javier_EFTS_2014/wr_efts_07_2014.tex
View file @ 4af4136f
...@@ -79,6 +79,8 @@ ...@@ -79,6 +79,8 @@
\usepackage{textcomp} % for \textmu (greek letter mu without the need \usepackage{textcomp} % for \textmu (greek letter mu without the need
% to use Math mode) % to use Math mode)
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Title Page Info %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Title Page Info %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
...@@ -156,7 +158,7 @@ ...@@ -156,7 +158,7 @@
\begin{frame}{Dispelling the commercial vs open myth} \begin{frame}{Dispelling the commercial vs open myth}
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../figures/ohwr/commercial_and_open.pdf} \includegraphics[width=\textwidth]{ohwr/commercial_and_open.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -218,7 +220,7 @@ We specify fully the design. ...@@ -218,7 +220,7 @@ We specify fully the design.
\column{.6\textwidth} \column{.6\textwidth}
\begin{center} \begin{center}
\includegraphics[width=1.0\textwidth]{../../figures/network/wr_network-ethernet.jpg} \includegraphics[width=1.0\textwidth]{network/wr_network-ethernet.jpg}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -242,7 +244,7 @@ We specify fully the design. ...@@ -242,7 +244,7 @@ We specify fully the design.
\column{.6\textwidth} \column{.6\textwidth}
\begin{center} \begin{center}
\includegraphics[width=1.0\textwidth]{../../figures/network/wr_network-enhanced_pro.jpg} \includegraphics[width=1.0\textwidth]{network/wr_network-enhanced_pro.jpg}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -269,7 +271,7 @@ We specify fully the design. ...@@ -269,7 +271,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/gsiANDcern.pdf} \includegraphics[width=0.6\textwidth]{applications/gsiANDcern.pdf}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -293,7 +295,7 @@ We specify fully the design. ...@@ -293,7 +295,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/lhaaso.pdf} \includegraphics[width=0.6\textwidth]{applications/lhaaso.pdf}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -317,7 +319,7 @@ We specify fully the design. ...@@ -317,7 +319,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/KM3NeT.pdf} \includegraphics[width=0.6\textwidth]{applications/KM3NeT.pdf}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -341,7 +343,7 @@ We specify fully the design. ...@@ -341,7 +343,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/cta.pdf} \includegraphics[width=0.6\textwidth]{applications/cta.pdf}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -366,7 +368,7 @@ We specify fully the design. ...@@ -366,7 +368,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/netherlands.jpg} \includegraphics[width=0.6\textwidth]{applications/netherlands.jpg}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -391,7 +393,7 @@ We specify fully the design. ...@@ -391,7 +393,7 @@ We specify fully the design.
\end{itemize} \end{itemize}
\column{0.55\textwidth} \column{0.55\textwidth}
\begin{center} \begin{center}
\includegraphics[width=0.6\textwidth]{../../figures/applications/finland.jpg} \includegraphics[width=0.6\textwidth]{applications/finland.jpg}
\end{center} \end{center}
\column{0.6\textwidth} \column{0.6\textwidth}
\end{columns} \end{columns}
...@@ -405,7 +407,7 @@ We specify fully the design. ...@@ -405,7 +407,7 @@ We specify fully the design.
\begin{columns}[c] \begin{columns}[c]
\column{1.5in} \column{1.5in}
\begin{center} \begin{center}
\includegraphics[height=5cm]{../../figures/protocol/ptp_exchange.pdf} \includegraphics[height=5cm]{protocol/ptp_exchange.pdf}
\end{center} \end{center}
\column{2.5in} \column{2.5in}
\begin{itemize} \begin{itemize}
...@@ -431,7 +433,7 @@ We specify fully the design. ...@@ -431,7 +433,7 @@ We specify fully the design.
\vspace{-0.2cm} \vspace{-0.2cm}
\begin{center} \begin{center}
\includegraphics[height=4.5cm]{../../figures/misc/synce_v3.pdf} \includegraphics[height=4.5cm]{misc/synce_v3.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -439,21 +441,21 @@ We specify fully the design. ...@@ -439,21 +441,21 @@ We specify fully the design.
\begin{frame}{Digital Dual Mixer Time Difference}{DDMTD} \begin{frame}{Digital Dual Mixer Time Difference}{DDMTD}
\begin{center} \begin{center}
\includegraphics[width=\textwidth]{../../figures/misc/dmtd.pdf} \includegraphics[width=\textwidth]{misc/dmtd.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
\begin{frame}{Link delay model} \begin{frame}{Link delay model}
\begin{center} \begin{center}
\includegraphics[width=0.9\textwidth]{../../figures/protocol/link-model.pdf} \includegraphics[width=0.9\textwidth]{protocol/link-model.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
\begin{frame}{White Rabbit Switch} \begin{frame}{White Rabbit Switch}
\begin{center} \begin{center}
\includegraphics[width=6.0cm]{../../figures/switch/wrSwitchV3.jpg} \includegraphics[width=6.0cm]{switch/wrSwitchV3.jpg}
\end{center} \end{center}
\begin{itemize} \begin{itemize}
\item Central element of WR network \item Central element of WR network
...@@ -468,14 +470,14 @@ We specify fully the design. ...@@ -468,14 +470,14 @@ We specify fully the design.
\begin{frame}{Simplified block diagram of WR switch} \begin{frame}{Simplified block diagram of WR switch}
\begin{center} \begin{center}
\includegraphics[height=6.9cm]{../../figures/switch/switch_simple_diagram.pdf} \includegraphics[height=6.9cm]{switch/switch_simple_diagram.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
\begin{frame}{WR Node: SPEC board} \begin{frame}{WR Node: SPEC board}
\begin{center} \begin{center}
\includegraphics[width=7cm]{../../figures/node/spec.jpg} \includegraphics[width=7cm]{node/spec.jpg}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -497,7 +499,7 @@ We specify fully the design. ...@@ -497,7 +499,7 @@ We specify fully the design.
\begin{frame}{White Rabbit PTP Core} \begin{frame}{White Rabbit PTP Core}
\begin{center} \begin{center}
\includegraphics[width=0.9\textwidth]{../../figures/node/wrpc_inside.pdf} \includegraphics[width=0.9\textwidth]{node/wrpc_inside.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -507,7 +509,7 @@ We specify fully the design. ...@@ -507,7 +509,7 @@ We specify fully the design.
\begin{frame}{WR time transfer performance: test setup} \begin{frame}{WR time transfer performance: test setup}
\begin{center} \begin{center}
\includegraphics[height=7.0cm]{../../figures/measurements/meas_setup.jpg} \includegraphics[height=7.0cm]{measurements/meas_setup.jpg}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -515,7 +517,7 @@ We specify fully the design. ...@@ -515,7 +517,7 @@ We specify fully the design.
\begin{frame}{WR time transfer performance: test results} \begin{frame}{WR time transfer performance: test results}
\begin{center} \begin{center}
\includegraphics[height=6.0cm]{../../figures/measurements/meas_results.pdf} \includegraphics[height=6.0cm]{measurements/meas_results.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -562,7 +564,7 @@ We specify fully the design. ...@@ -562,7 +564,7 @@ We specify fully the design.
\begin{frame}{Ethernet Clock distribution a.k.a. Distributed DDS} \begin{frame}{Ethernet Clock distribution a.k.a. Distributed DDS}
\begin{center} \begin{center}
\includegraphics[width=\columnwidth]{../../figures/applications/remote_dds.pdf} \includegraphics[width=\columnwidth]{applications/remote_dds.pdf}
\end{center} \end{center}
\begin{block}{Distributed Direct Digital Synthesis} \begin{block}{Distributed Direct Digital Synthesis}
\begin{itemize} \begin{itemize}
...@@ -576,7 +578,7 @@ We specify fully the design. ...@@ -576,7 +578,7 @@ We specify fully the design.
\begin{frame}{Distributed oscilloscope} \begin{frame}{Distributed oscilloscope}
\begin{center} \begin{center}
\includegraphics[width=0.9\textwidth]{../../figures/applications/distr_oscill.pdf} \includegraphics[width=0.9\textwidth]{applications/distr_oscill.pdf}
\end{center} \end{center}
\begin{block}{} \begin{block}{}
\begin{itemize} \begin{itemize}
...@@ -590,7 +592,7 @@ PC. ...@@ -590,7 +592,7 @@ PC.
\begin{frame}{Support for redundancy} \begin{frame}{Support for redundancy}
\begin{center} \begin{center}
\includegraphics[width=0.9\textwidth]{../../figures/robustness/wrCRS.pdf} \includegraphics[width=0.9\textwidth]{robustness/wrCRS.pdf}
\end{center} \end{center}
\end{frame} \end{frame}
......
presentations/WR_Maciej_FIE/WhiteRabbit.tex
View file @ 4af4136f
This diff is collapsed.
presentations/WR_Maciej_ICALEPCS2011/WhiteRabbit.tex
View file @ 4af4136f
...@@ -48,6 +48,7 @@ ...@@ -48,6 +48,7 @@
\usepackage[utf8]{inputenc} \usepackage[utf8]{inputenc}
\usepackage{multirow} \usepackage{multirow}
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%5 %%%%%%%%%%%%5
%\usepackage{geometry} %\usepackage{geometry}
...@@ -89,7 +90,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -89,7 +90,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
% \end{center} % \end{center}
% } % }
\pgfdeclareimage[height=2.6cm]{wr-logo}{../../figures/logo/WRlogo.ps} \pgfdeclareimage[height=2.6cm]{wr-logo}{logo/WRlogo.ps}
\logo{\pgfuseimage{wr-logo}} \logo{\pgfuseimage{wr-logo}}
\AtBeginSection[] \AtBeginSection[]
% { % {
...@@ -146,7 +147,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -146,7 +147,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.6\textwidth} \column{.6\textwidth}
\begin{center} \begin{center}
\includegraphics[height=1.0\textwidth]{../../figures/network/wr_network-new.ps} \includegraphics[height=1.0\textwidth]{network/wr_network-new.ps}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -160,7 +161,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -160,7 +161,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{center} \begin{center}
\includegraphics[width=0.9\textwidth]{../../figures/robustness/sub_domains-old.ps} \includegraphics[width=0.9\textwidth]{robustness/sub_domains-old.ps}
\end{center} \end{center}
......
presentations/WR_Maciej_ISPCS2011/WhiteRabbit.tex
View file @ 4af4136f
...@@ -46,6 +46,8 @@ ...@@ -46,6 +46,8 @@
\usepackage[polish,english]{babel} \usepackage[polish,english]{babel}
\usepackage[utf8]{inputenc} \usepackage[utf8]{inputenc}
\usepackage{multirow} \usepackage{multirow}
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%5 %%%%%%%%%%%%5
%\usepackage{geometry} %\usepackage{geometry}
%\geometry{verbose,letterpaper} %\geometry{verbose,letterpaper}
...@@ -83,7 +85,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -83,7 +85,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
% \end{center} % \end{center}
% } % }
\pgfdeclareimage[height=0.6cm]{wr-logo}{../../figures/logo/WRlogo.ps} \pgfdeclareimage[height=0.6cm]{wr-logo}{logo/WRlogo.ps}
\logo{\pgfuseimage{wr-logo}} \logo{\pgfuseimage{wr-logo}}
\AtBeginSection[] \AtBeginSection[]
% { % {
...@@ -176,7 +178,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -176,7 +178,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\end{itemize} \end{itemize}
\begin{center} \begin{center}
\includegraphics[height=3cm]{../../figures/protocol/wrLink.ps} \includegraphics[height=3cm]{protocol/wrLink.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -187,7 +189,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -187,7 +189,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\center A White Rabbit Network \center A White Rabbit Network
\begin{center} \begin{center}
\includegraphics[width=11.5cm]{../../figures/network/wrTopology.eps} \includegraphics[width=11.5cm]{network/wrTopology.eps}
\end{center} \end{center}
\end{frame} \end{frame}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
...@@ -283,7 +285,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -283,7 +285,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\vspace{0.2cm} \vspace{0.2cm}
\begin{center} \begin{center}
\includegraphics[height=2.5cm]{../../figures/protocol/delaymodel.eps} \includegraphics[height=2.5cm]{protocol/delaymodel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -311,7 +313,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -311,7 +313,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Link Delay Model: fiber optic solution} \begin{frame}{Link Delay Model: fiber optic solution}
\begin{center} \begin{center}
\includegraphics[height=4cm]{../../figures/protocol/wrLinkModel.eps} \includegraphics[height=4cm]{protocol/wrLinkModel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -356,7 +358,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -356,7 +358,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \subsection{} % \subsection{}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\setbeamertemplate{background}{\includegraphics[width=\paperwidth]{../../figures/protocol/wrLinkModel-fdm2.ps}} \setbeamertemplate{background}{\includegraphics[width=\paperwidth]{protocol/wrLinkModel-fdm2.ps}}
\logo{} \logo{}
\begin{frame}{Fine Delay Measurement} \begin{frame}{Fine Delay Measurement}
...@@ -371,7 +373,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -371,7 +373,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fine Delay Measurement} \begin{frame}{Fine Delay Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/protocol/link_model.eps} \includegraphics[width=10.0cm]{protocol/link_model.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -379,7 +381,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -379,7 +381,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsection{} %\subsection{}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\setbeamertemplate{background}{\includegraphics[width=\paperwidth]{../../figures/protocol/wrLinkModel-fd.ps}} \setbeamertemplate{background}{\includegraphics[width=\paperwidth]{protocol/wrLinkModel-fd.ps}}
\logo{} \logo{}
\begin{frame}{Fixed Delays Measurement} \begin{frame}{Fixed Delays Measurement}
...@@ -394,7 +396,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -394,7 +396,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fixed Delays Measurement} \begin{frame}{Fixed Delays Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/misc/calibration.eps} \includegraphics[width=10.0cm]{misc/calibration.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -478,13 +480,13 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -478,13 +480,13 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/WR-peer_recognision-1.eps} \includegraphics[width=5.5cm]{protocol/WR-peer_recognision-1.eps}
\end{center} \end{center}
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/WR-peer_recognision-2.eps} \includegraphics[width=5.5cm]{protocol/WR-peer_recognision-2.eps}
\end{center} \end{center}
\end{columns} \end{columns}
...@@ -499,7 +501,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -499,7 +501,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/wrLinkSetup.eps} \includegraphics[width=5.5cm]{protocol/wrLinkSetup.eps}
\end{center} \end{center}
...@@ -582,7 +584,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -582,7 +584,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%{\it [problem with a presentation flow]} %{\it [problem with a presentation flow]}
\begin{center} \begin{center}
\includegraphics[width=11.8cm]{../../figures/protocol/wrCRS_plus_mBMC.eps} \includegraphics[width=11.8cm]{protocol/wrCRS_plus_mBMC.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -593,7 +595,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -593,7 +595,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Test bed} \begin{frame}{Test bed}
\begin{center} \begin{center}
\includegraphics[height=7.0cm]{../../figures/measurements/measSystem.ps} \includegraphics[height=7.0cm]{measurements/measSystem.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -603,7 +605,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -603,7 +605,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Test results} \begin{frame}{Test results}
\begin{center} \begin{center}
\includegraphics[height=6.0cm]{../../figures/measurements/measResults-new.eps} \includegraphics[height=6.0cm]{measurements/measResults-new.eps}
\end{center} \end{center}
...@@ -614,7 +616,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -614,7 +616,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{White Rabbit Switch (V2)} \begin{frame}{White Rabbit Switch (V2)}
\begin{center} \begin{center}
\includegraphics[width=8.0cm]{../../figures/switch/old_switches2.ps} \includegraphics[width=8.0cm]{switch/old_switches2.ps}
\end{center} \end{center}
\begin{itemize} \begin{itemize}
...@@ -635,7 +637,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -635,7 +637,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{WR-compliant Hardware Kit} \begin{frame}{WR-compliant Hardware Kit}
\begin{center} \begin{center}
\includegraphics[width=6cm]{../../figures/node/shw_kit.ps} \includegraphics[width=6cm]{node/shw_kit.ps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -693,7 +695,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -693,7 +695,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{center} \begin{center}
% \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps} % \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps}
\includegraphics[height=4.0cm]{../../figures/logo/WRlogo.ps} \includegraphics[height=4.0cm]{logo/WRlogo.ps}
\end{center} \end{center}
\end{frame} \end{frame}
......
presentations/WR_Maciej_ITU-T2012-report/WhiteRabbit.tex
View file @ 4af4136f
...@@ -46,6 +46,9 @@ ...@@ -46,6 +46,9 @@
\usepackage[polish,english]{babel} \usepackage[polish,english]{babel}
\usepackage[utf8]{inputenc} \usepackage[utf8]{inputenc}
\usepackage{multirow} \usepackage{multirow}
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%5 %%%%%%%%%%%%5
%\usepackage{geometry} %\usepackage{geometry}
%\geometry{verbose,letterpaper} %\geometry{verbose,letterpaper}
...@@ -84,7 +87,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -84,7 +87,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
% \end{center} % \end{center}
% } % }
\pgfdeclareimage[height=0.6cm]{wr-logo}{../../figures/logo/WRlogo.ps} \pgfdeclareimage[height=0.6cm]{wr-logo}{logo/WRlogo.ps}
\logo{\pgfuseimage{wr-logo}} \logo{\pgfuseimage{wr-logo}}
\AtBeginSection[] \AtBeginSection[]
% { % {
...@@ -116,7 +119,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -116,7 +119,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\end{itemize} \end{itemize}
\begin{center} \begin{center}
\includegraphics[height=3.5cm]{../../figures/misc/gva-dva.ps} \includegraphics[height=3.5cm]{misc/gva-dva.ps}
\end{center} \end{center}
...@@ -411,7 +414,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -411,7 +414,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{center} \begin{center}
% \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps} % \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps}
%\includegraphics[height=4.0cm]{fig/WRlogo.ps} %\includegraphics[height=4.0cm]{fig/WRlogo.ps}
\includegraphics[height=6.0cm]{../../figures/misc/maciek_questions.ps} \includegraphics[height=6.0cm]{misc/maciek_questions.ps}
\end{center} \end{center}
\end{frame} \end{frame}
......
presentations/WR_Maciej_ITU-T2012/WhiteRabbit.tex
View file @ 4af4136f
...@@ -46,6 +46,9 @@ ...@@ -46,6 +46,9 @@
\usepackage[polish,english]{babel} \usepackage[polish,english]{babel}
\usepackage[utf8]{inputenc} \usepackage[utf8]{inputenc}
\usepackage{multirow} \usepackage{multirow}
\graphicspath{ {../../figures/} }
%%%%%%%%%%%%5 %%%%%%%%%%%%5
%\usepackage{geometry} %\usepackage{geometry}
%\geometry{verbose,letterpaper} %\geometry{verbose,letterpaper}
...@@ -94,7 +97,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -94,7 +97,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
% \end{center} % \end{center}
% } % }
\pgfdeclareimage[height=0.6cm]{wr-logo}{../../figures/logo/WRlogo.ps} \pgfdeclareimage[height=0.6cm]{wr-logo}{logo/WRlogo.ps}
\logo{\pgfuseimage{wr-logo}} \logo{\pgfuseimage{wr-logo}}
\AtBeginSection[] \AtBeginSection[]
% { % {
...@@ -155,7 +158,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -155,7 +158,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\end{itemize} \end{itemize}
\begin{center} \begin{center}
\includegraphics[height=3cm]{../../figures/protocol/wrLink.ps} \includegraphics[height=3cm]{protocol/wrLink.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -192,7 +195,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -192,7 +195,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fine Delay Measurement} \begin{frame}{Fine Delay Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/protocol/link_model.eps} \includegraphics[width=10.0cm]{protocol/link_model.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -203,7 +206,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -203,7 +206,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Link Asymmetry} \begin{frame}{Link Asymmetry}
\begin{center} \begin{center}
\includegraphics[height=4cm]{../../figures/protocol/wrLinkModel_init.eps} \includegraphics[height=4cm]{protocol/wrLinkModel_init.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -222,7 +225,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -222,7 +225,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\vspace{0.2cm} \vspace{0.2cm}
\begin{center} \begin{center}
\includegraphics[height=2.5cm]{../../figures/protocol/delaymodel.eps} \includegraphics[height=2.5cm]{protocol/delaymodel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -250,7 +253,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -250,7 +253,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fixed Delays} \begin{frame}{Fixed Delays}
\begin{center} \begin{center}
\includegraphics[width=11.0cm]{../../figures/protocol/asymmetries.eps} \includegraphics[width=11.0cm]{protocol/asymmetries.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -261,7 +264,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -261,7 +264,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Link Delay Model: fiber optic solution} \begin{frame}{Link Delay Model: fiber optic solution}
\begin{center} \begin{center}
\includegraphics[height=4cm]{../../figures/protocol/wrLinkModel.eps} \includegraphics[height=4cm]{protocol/wrLinkModel.eps}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
...@@ -320,7 +323,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -320,7 +323,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.0cm]{../../figures/protocol/WR-peer_recognision-1.eps} \includegraphics[width=5.0cm]{protocol/WR-peer_recognision-1.eps}
\newline \newline
Two WR devices Two WR devices
\end{center} \end{center}
...@@ -328,7 +331,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -328,7 +331,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.0cm]{../../figures/protocol/WR-peer_recognision-2.eps} \includegraphics[width=5.0cm]{protocol/WR-peer_recognision-2.eps}
\newline \newline
WR and non-WR device WR and non-WR device
\end{center} \end{center}
...@@ -345,7 +348,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -345,7 +348,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\column{.5\textwidth} \column{.5\textwidth}
\begin{center} \begin{center}
\includegraphics[width=5.5cm]{../../figures/protocol/wrLinkSetup.eps} \includegraphics[width=5.5cm]{protocol/wrLinkSetup.eps}
\end{center} \end{center}
...@@ -369,7 +372,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -369,7 +372,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Modified Best Master Clock Algorithm (mBMCA)} \begin{frame}{Modified Best Master Clock Algorithm (mBMCA)}
\begin{center} \begin{center}
\includegraphics[height=7.0cm]{../../figures/protocol/mBMCvsBMC.eps} \includegraphics[height=7.0cm]{protocol/mBMCvsBMC.eps}
\end{center} \end{center}
...@@ -383,7 +386,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -383,7 +386,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
%{\it [problem with a presentation flow]} %{\it [problem with a presentation flow]}
\begin{center} \begin{center}
\includegraphics[width=11.8cm]{../../figures/protocol/wrCRS_plus_mBMC.eps} \includegraphics[width=11.8cm]{protocol/wrCRS_plus_mBMC.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -394,7 +397,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -394,7 +397,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Test bed} \begin{frame}{Test bed}
\begin{center} \begin{center}
\includegraphics[height=7.0cm]{../../figures/measurements/measSystem.ps} \includegraphics[height=7.0cm]{measurements/measSystem.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -404,7 +407,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -404,7 +407,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Test results} \begin{frame}{Test results}
\begin{center} \begin{center}
\includegraphics[height=6.0cm]{../../figures/measurements/measResults-new.eps} \includegraphics[height=6.0cm]{measurements/measResults-new.eps}
\end{center} \end{center}
...@@ -415,7 +418,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -415,7 +418,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{White Rabbit Switch (V3)} \begin{frame}{White Rabbit Switch (V3)}
\begin{center} \begin{center}
\includegraphics[width=6.0cm]{../../figures/switch/wrSwitchV3.ps} \includegraphics[width=6.0cm]{switch/wrSwitchV3.ps}
\end{center} \end{center}
\begin{itemize} \begin{itemize}
...@@ -471,7 +474,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -471,7 +474,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{center} \begin{center}
% \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps} % \includegraphics[height=4.0cm]{fig/white_rabbit_by_kyoht.ps}
\includegraphics[height=4.0cm]{../../figures/logo/WRlogo.ps} \includegraphics[height=4.0cm]{logo/WRlogo.ps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -484,7 +487,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -484,7 +487,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Fixed Delays Measurement} \begin{frame}{Fixed Delays Measurement}
\begin{center} \begin{center}
\includegraphics[width=10.0cm]{../../figures/misc/calibration.eps} \includegraphics[width=10.0cm]{misc/calibration.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -494,7 +497,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -494,7 +497,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{Proposed topology of WR network at CERN} \begin{frame}{Proposed topology of WR network at CERN}
\begin{center} \begin{center}
\includegraphics[width=8cm]{../../figures/applications/CERN/NT-overview.eps} \includegraphics[width=8cm]{applications/CERN/NT-overview.eps}
\end{center} \end{center}
\end{frame} \end{frame}
...@@ -504,7 +507,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez ...@@ -504,7 +507,7 @@ Maciej Lipi\'{n}ski %, T.W\l{}ostowski, J.Serrano, P.Alvarez
\begin{frame}{WR-compliant Hardware Kit} \begin{frame}{WR-compliant Hardware Kit}
\begin{center} \begin{center}
\includegraphics[width=6cm]{../../figures/node/shw_kit} \includegraphics[width=6cm]{node/shw_kit}
\end{center} \end{center}
\begin{columns}[c] \begin{columns}[c]
......
presentations/robustness/robustness.tex
View file @ 4af4136f
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment