FMC-Temp-PT100-15ch
Project description
FMC HPC PT100 temperature sensor interface card. Allows the connection of 15 sensors in a 4-wire configuration over a military-grade high-density Sub-D connector. Used in the SAMbuCa project.
FMC Temp PT100 15ch prototype on SPEXI7U
Main Features
- Readout of up to 15 PT100 sensors in 4-wire configuration, using three LTC2984ILX#PBF
- FMC card with Low-Pin-Count (LPC) connector
- Vadj compatible with 1.8V, 2.5V and 3.3V
- 6-layer PCB
- high-reliability micro-D connector (MIL-DTL-83513)
Project information
- Official production documentation: EDMS EDA-04499-V1
- Users
- Software
- SAMbuCa project
- Frequently Asked Questions
Contacts
Commercial producers
- Not commercially available yet
General questions about project
- Paul Peronnard - CERN
Status
Date | Event |
---|---|
10-01-2019 | Start working on project. Collecting main specifications. |
10-06-2019 | One prototype tested. |
22-03-2021 | Design being industrialized by CERN's design office. |
17-05-2022 | PTS Test Specification planned to be ready by End of 2022. |
18-08-2022 | Availability of main component LTC2984ILX#PBF problematic. Possibly this card is not needed at CERN and a dedicated DI/OT Peripheral board will be designed. |
18 August 2022