Pull-up resistor for 1-wire thermometer too high value
Is 10 kOhm and should be around 5kOhm (or 1kOhm - 5kOhm).
Make sure new value resistor is already used as not to enlarge the
BOM.
See https://www.ohwr.org/work_packages/383
Is 10 kOhm and should be around 5kOhm (or 1kOhm - 5kOhm).
Make sure new value resistor is already used as not to enlarge the
BOM.
See https://www.ohwr.org/work_packages/383