V3-1 - Add 10mm spacers,replace FMC front panel kit
The standoffs are not in the BOM file EDA-02290-V3-1_arrangement-mat. They are needed and even shown in EDA-02290-V3-1_arrangement.
Replace the Xtech FMC front panel kit, the two spacers and the four
hexalobular screws by the following ELMA kit reference:
21M280-2
The ELMA 21M280-2 kit contains:
- 1 FMC front panel
- 1 O-ring
- 2 10mm spacers
- 8 M2.5x6mm screws