@@ -138,7 +138,7 @@ The registers addresses between 0x026B and 0x0272 contain user-defined values th
The \gls{led}s and \gls{pmt} connectors on the front panel are part of an auxiliary board installed together with the \brd. All the functionalities on the board, such as the indicators and the \gls{dac} are controlled via \gls{i2c} bus.\\
Is the \gls{tlu} is controlled using EUDAQ, the \gls{dac} can be steered by means of a parameter in the configuration file (see section~\ref{ch:EUDAQPar} for details).\\
Three green \gls{led} on the front panel are used to indicate the presence of power (+12 V) and the correct functioning of the +5 V and -5 V voltage regulators. Further indicators are assigned to the \gls{hdmi} and trigger inputs to provide information on their status. These indicators are \gls{rgb}. At the moment there is not defined scheme to assign a meaning to each colour.\\
The LEMO connectors used to power the \gls{pmt}s are wired according to the following scheme, inherited from what already in use in beam telescopes (FIX THIS):
The LEMO connectors used to power the \gls{pmt}s are wired according to the following scheme, inherited from what already in use in beam telescopes:
