Added status. Modified specs to be final specs instead of design guidelines. Removed "withstand output shorted" spec: works but is out of spec driver IC

Home.md

@@ -13,20 +13,18 @@ dio\_small.jpg
 
   - 5 input/output ports (Lemo 00 connectors)
   - Output levels: LVTTL, capable of driving +3.3 V over a 50-Ohm load.
-    At power-up the outputs should be in Hi-Z state
+    At power-up the outputs are in Hi-Z state (V1-2 and higher)
   - Input levels: any logic standard from Vih = 1 V to Vih = 5 V
     (programmable threshold)
   - Output Rise/fall times: max. 2 ns
   - Input bandwidth: min. 200 MHz
   - Programmable 50-Ohm input termination in each channel
   - LVDS I/O on the carrier side
-  - One of the inputs shall be capable of driving a global clock net in
-    the carrier's FPGA
-  - Inputs need to be protected against +15V pulses with a pulse width
-    of at least 10us @ 50Hz (with protection diodes if possible)
-  - Withstands a continuous short-circuit on all the outputs at the same
-    time (see
-[Issue 491](https://www.ohwr.org/project/fmc-dio-5chttla/issues/9))
+  - One of the inputs is capable of driving a global clock net in the
+    carrier's FPGA
+  - Inputs protected against +15V pulses with a pulse width of up to
+    10us @
+50Hz
 
 ## Block diagram  
 ![](/uploads/2d0b0f455ea9fd3936c518b4d07a6173/block_diagram.jpg)
@@ -53,9 +51,11 @@ dio\_small.jpg
     [Creotech](http://creotech.pl/), Poland
   - [INCAA Computers](http://incaacomputers.nl), Netherlands.
 
-### General question about project
+### Project
 
-  - [Erik van der Bij](mailto:Erik.van.der.Bij@cern.ch) - CERN
+  - [Erik van der Bij](mailto:Erik.van.der.Bij@cern.ch) - CERN - General
+    question about project
+  - Tom Wlostowski - CERN - Designer
 
 -----
 
@@ -103,12 +103,17 @@ dio\_small.jpg
 <td>13-04-2012</td>
 <td>First version of Production test program written and documented in [PTS project](https://www.ohwr.org/project/pts/tree/master/test/fmcdio5chttla).</td>
 </tr>
+<tr class="odd">
+<td>15-08-2012</td>
+<td>V2-0 design being made to solve known Issues. V1-2 solves <a href="https://www.ohwr.org/project/fmc-dio-5chttla/issues/10">issue 487</a>.<br />
+Removed &quot;withstands output shorted&quot; spec: it works but is out of spec of driver IC.</td>
+</tr>
 </tbody>
 </table>
 
 -----
 
-Tom Wlostowski, Erik van der Bij - 25 June 2012
+Tom Wlostowski, Erik van der Bij - 15 August 2012