Skip to content

F
FMC ADC 100M 14b 4cha - Software
Commit 575be603 authored by Alessandro Rubini's avatar Alessandro Rubini
Browse files
Options

doc: explained test data slightly better 

Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 8155133f
Hide whitespace changes
Inline Side-by-side
Showing with 5 additions and 2 deletions
doc/fmc-adc-driver.in
View file @ 575be603
......@@ -318,8 +318,11 @@ The following parameters are used:
@item enable_test_data=1
This is for testing purpose. This option enables the testing
data, so the ADC doesn't store samples, but fill the memory with
sequential numbers. Again, this applies to all cards in the system.
data, so the ADC doesn't store samples, but fills memory with
sequential numbers. The 64 bit data vector is filled with
sequential values from a free-running 25 bit counter: channel 0
sweeps the full range, channel 1 goes from 0 to 511, other channel
always report 0. Trigger detection is unaffected by use of test data.
@item busid=NUMBER[,NUMBER...]
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment