V5 - Replace LEMO connectors by backwards compatible type

When going from V6 to V5 the LEMO connector type has been changed from EPL to EPK. The EPK type is compatible to the EPL-type used before.

V6

• https://edms.cern.ch/file/2258651/1/EDA-02063-V6-0_pcb-mat.pdf
• J5 EPK.00.250.NTN (09.46.11.180.6)
• https://www.lemo.com/pdf/EPK.00.250.NTN.pdf

V5

• https://edms.cern.ch/file/1165461/1/EDA-02063-V5-0_pcb-mat.pdf
• J1-J5 EPL.00.250.NTN (09.46.11.180.6)
• https://www.lemo.com/pdf/EPL.00.250.NTN.pdf

The CERN SCEM item number is the same and now the Stores catalogue shows the one used in V6: EPK.00.250.NTN https://edh.cern.ch/edhcat/Browser?command=searchItems&scem=09.46.11.180.6#

The EPK has liberated some space in the housing and makes it looks like that the corner pins are on some feet. The connector body therefore no longer touches the board, and prevents short circuits on some designs. EDA-02063 may use both types.