... | ... | @@ -117,17 +117,11 @@ |
|
|
|
|
|
## Documentation
|
|
|
|
|
|
1. Check that each schematics page has on the same location the [Open
|
|
|
Hardware Licence
|
|
|
text](https://www.ohwr.org/project/cernohl/uploads/8eaab7317d1719b8dda14bbe796c4ebc/cern_ohl_v_1_2_howto.pdf):
|
|
|
"Copyright mycompany 2017. This documentation describes Open
|
|
|
Hardware ..."
|
|
|
- This text can be found in the 'howto' file at [CERN OHL
|
|
|
version 1.2](https://www.ohwr.org/project/cernohl/wikis/Documents/CERN-OHL-version-1.2)..
|
|
|
- Check for this same OHL text on the mechanical drawings
|
|
|
(front-panel and 'arrangement')
|
|
|
2. Make sure that all texts, indications and annotations are written in
|
|
|
English.
|
|
|
1. Check that each schematics page has on the same place the Open Hardware Licence text of its corresponding variant (-S, -W, -P):
|
|
|
"Copyright "mycompany" 2020. This source describes Open Hardware and is licensed under the CERN-OHL-S v2 ..."
|
|
|
- This text can be found in the 'Guide' at [CERN OHL version 2](https://ohwr.org/project/cernohl/wikis/Documents/CERN-OHL-version-2).
|
|
|
- Check for this same OHL text on the mechanical drawings (front-panel and 'arrangement').
|
|
|
2. Make sure that all texts, indications and annotations are written in English.
|
|
|
3. Check and remove any DRC error flags.
|
|
|
4. Document all inputs and outputs on the schematics pages
|
|
|
- voltage and current on external power connectors
|
... | ... | @@ -137,5 +131,5 @@ |
|
|
|
|
|
-----
|
|
|
|
|
|
Erik van der Bij - 23 July 2018
|
|
|
Erik van der Bij - 14 April 2020
|
|
|
|