@@ -16,7 +16,7 @@ The GUI application is presented in :numref:`fig_gui`.
Screenshot of the GUI application
Channels selection:
Channels selection
------------------
Just like in standard oscilloscope, there is a possibility of observing up to 4 channels. Any channel of any available ADC can be connected to the particular channel of the GUI.
...
...
@@ -31,8 +31,7 @@ Just like in standard oscilloscope, there is a possibility of observing up to 4
Selection of GUI channels
Triggers selection:
Triggers selection
-----------------
The ADCs could be triggered either by external trigger pulse or when signal of the observed channel crosses the threshold value.
...
...
@@ -47,8 +46,7 @@ The ADCs could be triggered either by external trigger pulse or when signal of t
Selection of trigger type
Internal trigger:
Internal trigger
^^^^^^^^^^^^^^^^
If the internal trigger is selected, the GUI could be triggered on any channel to which a signal is connected.
...
...
@@ -63,8 +61,7 @@ If the internal trigger is selected, the GUI could be triggered on any channel t
Selection of internal trigger
External trigger:
External trigger
^^^^^^^^^^^^^^^^
If the external trigger is selected, the GUI could be triggered by the external trigger input of any connected ADC.
...
...
@@ -79,9 +76,7 @@ If the external trigger is selected, the GUI could be triggered by the external
Selection of external trigger
Channels settings:
Channels settings
----------------
Currently available channels settings are following:
...
...
@@ -90,7 +85,6 @@ Currently available channels settings are following:
* termination
* offset
.. figure:: graphics/GUI_channels_settings.png
:name: fig_gui_chann_sett
:width: 120pt
...
...
@@ -101,8 +95,7 @@ Currently available channels settings are following:
Channels settings
Trigger settings:
Trigger settings
----------------
Currently available trigger settings are following:
...
...
@@ -121,8 +114,7 @@ Currently available trigger settings are following:
Trigger settings
Run control:
Run control
---------------
There are two available modes:
...
...
@@ -140,8 +132,7 @@ There are two available modes:
Run control
Acquisition settings:
Acquisition settings
--------------------
Acquisition settings allow to modify the acquisition time and position of the trigger. Position of the trigger is given in percentage of the acquisition time.