| ... | ... | @@ -9,13 +9,13 @@ G. Daniluk, S. Danzeca, V. Schramm, D. Valuch |
|
|
|
# Notes
|
|
|
|
|
|
|
|
* Tests which can be performed with the equipment of the 864/R-B02 lab and which are recommended:
|
|
|
|
1. ESD (recommended; potentially an ESD gun is to be purchased)
|
|
|
|
1. EFT/Burst (recommended)
|
|
|
|
1. Surge (recommended)
|
|
|
|
1. Radiated immunity (to be checked with users whether necessary)
|
|
|
|
1. Conducted disturbances (recommended)
|
|
|
|
1. Voltage dips, drops and interruptions (recommended)
|
|
|
|
1. Magnetic field (easy to test, but TBC whether necessary)
|
|
|
|
- ESD (recommended; potentially an ESD gun is to be purchased)
|
|
|
|
- EFT/Burst (recommended)
|
|
|
|
- Surge (recommended)
|
|
|
|
- Radiated immunity (to be checked with users whether necessary)
|
|
|
|
- Conducted disturbances (recommended)
|
|
|
|
- Voltage dips, drops and interruptions (recommended)
|
|
|
|
- Magnetic field (easy to test, but TBC whether necessary)
|
|
|
|
* Emission testing may not be necessary for the installation regions of the DI/OT.
|
|
|
|
* Approach to test until failure and to evaluate the obtained immunity level. If necessary design optimisations are to be implemented.
|
|
|
|
* 3-step-strategy to perform an 1) EMC Design Review, followed by 2) Pre-Compliance Testing, and final 3) Approval Testing alongside the DI/OT design process (see slide 10).
|
| ... | ... | |
