[Crate mechanics] design changes
-
Design: - include RTM rails
- add socket for ESD bracelet on the front panel
- connection of front panel to PE
- replace front panel IDC with female subD
- faston terminals to be covered in BOM and model
- move the mains switches to the rear, integrated with the mains entry sockets
- handles: replace with more robust/ergonomic ones
- roof/feet: make a curvature towards the top to direct water also avoid cables scratching, or side edge gaskets (see EDA-04146: Yellow Rack Cover Mechanical Parts, Assembly Data EDA-04147: Yellow Rack Signalisation Mechanical Parts)
-
BOM: - specify 230V, 2A fuses
- add RTM rails
- add faston covers
-
Wiring Diagram: - show fuses of the power-entry sockets
- add info on Power Backplane switches configuration
- update, after the moving switches to the back
- add license (see below)
-
License:
"Copyright CERN 2020. License under OHLv2-W.
This source describes Open Hardware and is licensed under the CERN-OHLW v2 You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-W v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions."
For mechanical 2D drawings, add the txt above on the side of a drawing, always in the same place for all drawings. For 3D models, either we find some metadata field inside the file to embed that information or we use an external file with the same file name as the design and the extension ".license" as is done in the REUSE guidelines.