Home.md

 # Cute-WR-DP 
 # (Compact Universal Timing Endpoint Based on White Rabbit with Dual Ports)
 
-Since the quite old Spartan-6 FPGA is used on Cute-WR-DP; the [Cute-WR-A7](https://ohwr.org/project/cute-wr-a7/wikis/home) replaces the FPGA with much newer Artix 7 family.
+The project is obsolete, a similar project [Cute-WR-A7](https://ohwr.org/project/cute-wr-a7/wikis/home) replaces the old Spartan-6 FPGA with Artix 7 family.
 
 ## Introduction
 
@@ -23,8 +23,6 @@ There are three operation modes for Cute-WR-DP.
         related applications. The current firmware doesn't support this
         function.
 
-## Hardware
-
 ![](/uploads/c9c1d06426079bf7f5ff1b1fc5b0c25d/Cute-WR-DP__block_diagram.jpg.png)
 
 **Block diagram**
@@ -34,7 +32,7 @@ There are three operation modes for Cute-WR-DP.
 **Cute-WR-DP**
 
 
-## Hardware Features:
+## Features:
 
   - 3.3v power supply, 1.5A
   - VITA57 FMC mezzanine
@@ -52,20 +50,15 @@ There are three operation modes for Cute-WR-DP.
 LEDs
 
 -----
+## Hardware
+
 
 ## Firmware
 
-![](/uploads/e0868cff1a89ea94f2fd21d06e77f37e/dual_port_structure.png)  
 The firmware is based on WRPC with modified code in the LM32 softcore.  
 The additional resource cost to support Dual Port is less than twice
 that of a single port.
 
------
-
-## Project information
-
-  - [Production
-    Documentation](https://www.ohwr.org/project/cute-wr-dp/tree/master)
   - Normal Mode (Cute-WR-DP-NM)
       - Latest Firmware ([bit
         file](https://www.ohwr.org/project/cute-wr-dp/uploads/1ba1b78b7813954723ff85899836b4df/cute_wr_demo.bit),