|
|
|
# Frequently Asked Questions
|
|
|
|
|
|
|
|
## Hardware
|
|
|
|
|
|
|
|
### Q: does the board comply to CE regulations (EMC)?
|
|
|
|
|
|
|
|
A: Yes it does. In June 2012 extensive EMC tests have been performed on
|
|
|
|
the SPEC with a digital I/O (FMCDIO5chTTLa) card. These tests have been
|
|
|
|
made by [AT4 wireless](http://www.at4wireless.com/), a testing
|
|
|
|
laboratory accredited by the Spanish National Accreditation Body (ENAC
|
|
|
|
-Entidad Nacional de Acreditación) to perform the tests indicated in the
|
|
|
|
Certificate No. 51/LE 203.
|
|
|
|
The [test report](https://www.ohwr.org/project/spec/wikis/Documents/EMC-Test-report) is publicly
|
|
|
|
available and shows that the card has passed the most restrictive EMC
|
|
|
|
tests of each class (domestic and industrial) successfully:
|
|
|
|
|
|
|
|
- EM Radiated Emission: Class B (Domestic) EN 55022 (2006) / A1 (2007)
|
|
|
|
- EM Immunity (Industrial): EN 61000-4-3 (2006) / A1 (2008) / A2
|
|
|
|
(2010), EN 61000-4-4 (2004) / A1 (2010) / Corr (2010), EN 61000-4-6
|
|
|
|
(2009), EN 61000-4-2 (2009), EN 61000-4-8 (2010).
|
|
|
|
|
|
|
|
### Q: What are the differences between V1-0, V1-1 and V2-0?
|
|
|
|
|
|
|
|
A: V1-0 and V1-1 have different output buffers (SN74LS125 vs SN74LVT125)
|
|
|
|
caused by a mistake in the PCB library and resulting in poor output
|
|
|
|
pulse rise time and inability to drive 50 ohm loads in V1-0. V2-0 has
|
|
|
|
improved I/O protection circuit which works also when the card is not
|
|
|
|
powered. V1-0/V1-1 PCB designs are identical, in order to identify the
|
|
|
|
version, check the types of buffers soldered (IC2,
|
|
|
|
IC5).
|
|
|
|
|
|
|
|
### Q: My card seems to be missing IPMI FRU information in the EEPROM. Can it be fixed?
|
|
|
|
|
|
|
|
A: Many cards miss that information, as it was not supported by the DIO
|
|
|
|
PTS (Production Test System). A temporary procedure to fix this issue
|
|
|
|
goes as follows:
|
|
|
|
|
|
|
|
\- Make sure you're using the latest master of the SVEC/SPEC drivers.
|
|
|
|
|
|
|
|
\- Download the
|
|
|
|
[eeprom-dio.bin](https://www.ohwr.org/project/fmc-dio-5chttla/uploads/c4a017de2b47c61102aea23afd729435/eeprom-dio.bin)
|
|
|
|
file from the Files section.
|
|
|
|
|
|
|
|
\- Load the SPEC/SVEC driver and the golden bitstream
|
|
|
|
\- Program the EEPROM with the command (as root, replace XXXX with the
|
|
|
|
ID of the mezzanine):
|
|
|
|
|
|
|
|
cat eeprom-dio.bin > /sys/bus/fmc/devices/fmc-XXXX/eeprom
|
|
|
|
|
|
|
|
\- Reload the driver. Now it should enumerate the card correctly:
|
|
|
|
|
|
|
|
svec svec.0: mezzanine 0
|
|
|
|
Manufacturer: CERN
|
|
|
|
Product name: FmcDIO5chTTLa
|
|
|
|
|
|
|
|
-----
|
|
|
|
|
|
|
|
Tomasz Wlostowski - 1 July 2014
|
|
|
|
|
