Protoboard is working fine. Changes:

- Updated schematics and PCB. - Added gerber files for LPKF. Dead Link detection works. Carlos

Protoboard is working fine. Changes:
- Updated schematics and PCB. - Added gerber files for LPKF. Dead Link detection works. Carlos
61218899 · carlos · f12a546a · 61218899 · 61218899 · 61218899
Commit 61218899 authored Mar 07, 2012 by carlos
7 changed files
--- a/pcb/proto1/README.txt
+++ b/pcb/proto1/README.txt
+This is the proto used for testing the transceivers for RS485/RS422.
+
+FEATURES
+- Only Top Layer
+- Left: in TTL, out RS485
+- Right: in RS485
+- Detection of dead link
+
+DETECTION OF DEAD LINK
+If there's not enough differential signal level, an active low signal is asserted.
+- Dead link pin is marked as "F".
\ No newline at end of file
--- a/pcb/proto1/gerber/LPKF/proto.LMD
+++ b/pcb/proto1/gerber/LPKF/proto.LMD
--- a/pcb/proto1/gerber/LPKF/proto.cam
+++ b/pcb/proto1/gerber/LPKF/proto.cam
--- a/pcb/proto1/gerber/proto.drl
+++ b/pcb/proto1/gerber/proto.drl
+G92
+M48
+INCH,LZ
+FMAT,2
+T01C0.0315
+T02C0.0354
+T03C0.1260
+DETECT,ON
+%
+G90
+T01
+X03581Y01678
+X03681Y01778
+X03581Y01878
+X018Y019
+X017Y018
+Y02
+X014
+X015Y019
+X014Y018
+T02
+X03812Y01681
+X03912
+Y01867
+X03812
+X028Y013
+Y014
+Y015
+X029
+Y014
+Y013
+X0145Y0115
+Y0145
+X0155Y0135
+X0165
+X0175Y0145
+Y0115
+X01947Y01682
+Y01582
+X01272
+Y01682
+X0125Y023
+X0115Y024
+X0125Y025
+X0105
+Y023
+X02858Y02775
+X02758
+X02227
+X02127
+X02365Y02423
+X02465
+X03952Y02025
+Y02325
+X03652
+X03752Y02225
+Y02125
+X03652Y02025
+X0368Y02775
+X0358
+T03
+X0337Y01131
+X01996
+X01082Y0281
+X03936
+M30
--- a/pcb/proto1/gerber/proto.gm1
+++ b/pcb/proto1/gerber/proto.gm1
+G04 CAMtasticDXP RS274-X Output*
+G04 Serial Number: 0000-00-00000*
+G04 File Name:D:\CERN\contrib\ohwr\conv-ttl-rs485\pcb\proto1\gerber\proto.gm1 *
+%FSDAX24Y24*%
+%MOIN*%
+%SFA1B1*%
+
+%IPPOS*%
+%ADD10C,0.039400*%
+%LNproto-1*%
+%LPD*%
+G54D10*
+X009700Y010100D02*
+Y029800D01*
+Y010100D02*
+X040600D01*
+Y029800*
+X009700D02*
+X040600D01*
+M02*
\ No newline at end of file
--- a/pcb/proto1/gerber/proto.gtl
+++ b/pcb/proto1/gerber/proto.gtl
--- a/pcb/proto1/gerber/proto.rpt
+++ b/pcb/proto1/gerber/proto.rpt
+CAMtasticDXP Drill Report
+Serial Number:0000-00-00000
+Drill File: D:\CERN\contrib\ohwr\conv-ttl-rs485\pcb\proto1\gerber\proto.drl
+Format: 2.3
+Units: English (Inch)
+Step & Repeat Codes Used: NO
+
+
+TOOL		SIZE		COUNT
+====		======		=====
+
+ 1 		0.0315		9
+ 2 		0.0354		39
+ 3 		0.1260		4