[BLO-V2][RTMM] Changes to front and rear panels' design and assembly documents
The EMC gaskest on top of the front and rear panels (BLO & RTMM boards) appear in the assembly document as one single item: EMC Front Panels - Aluminium With EMC Gasket acc. IEEE - Thickness 2.5mm, with manufacturer P/N 66-518-26. As was the case in issue #660 with the SVECs, the gaskets are sold separately from the crate. Thus, they should appear as separate items in the assembly document.
The front panel design file in EDMS also contains a no-longer-valid kit number (26D604-6). This should be removed from the front panel drawing.
The following changes should be made (EDA-02446):
- Ref. 1: EMC Front Panel Aluminium with EMC Gasket acc. IEEE -> EMC Front Panel Alumniniun acc. IEEE
- Ref. 1: Change Observations to Thickness 2.5mm
- add ELMA 81-062-06 gaskets to the arrangement document
- remove kit 26D604-6 from front panel drawing
The SVEC design should be used as a reference for the arrangement
document:
https://edms.cern.ch/file/1249647/3/EDA-02530-V2-0_arrangement-mat.pdf
A similar issue exists with the RTMM boards. The EMC gaskets are however
properly included in the arrangement document of these boards.
The changes that should be made here are(EDA-02452-V2-0,
EDA-02452-V2-1):
- Ref. 1: EMC Front Panel Aluminium with EMC Gasket acc. IEEE -> EMC Front Panel Alumniniun acc. IEEE
- Ref. 1: Change Val & Device column for first entry to 6U-8HP
- Ref. 1: Change Observations field for first entry to Thickness 2.5mm
- Ref. 5, 6 (injector/ejector handles): Change Description field to Top/Bottom Black Handle without ESD Pin and Red button