Signed-off-by: Theodor Stana <t.stana@cern.ch>

The most major update is the fact that the login is not manual any more.
Instead, a common file `ei2cdefine.py' is used to define the ELMA crate
hostname, username and password. This module is used across all Python
scripts to connect to the ELMA crate.

Apart from that, some new modules have been added and the gp-py/ folder
was renamed to diag/
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

See README.txt for details.
Signed-off-by: Theodor Stana <t.stana@cern.ch>

The readflash.py tool can be used to read the flash from address A
to address B, where A and B are numbers selectable by the user. Checkout
README.txt for more details.

In multiboot.py, I updated the gateware version for the pulsetest
gateware (was wrong value of 0x99 before).
Signed-off-by: Theodor Stana <t.stana@cern.ch>

- added pulse time-tagging
- moved glitch filter to outside the PG block in the pulse-rep figure
- updated the memory map and made it prettier
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Also updated userguide to reflect this.
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Extra info added:
- updated and corrected pulse jitter information
- updated memory map
- updated pulse repetition mechanism figure to contain pulse counters
  and manual pulse triggering
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Also changed Python test programs to ask for login data.
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

- access cards via SNMP
- multiboot.py now reads raw binary files rather than the text files
  generated via the Micron flash bitstream generator
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

The script can be used to concatenate two bitstreams together. See
README for more details.
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

The version number of the firmware has been changed from 0x99 to 0xff;
the python script for the test has also been updated to reflect this
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Also fixed small errors in user guide: some lines were going outside
the textwidth in the memory map.
Signed-off-by: Thedi Stana <t.stana@cern.ch>

Signed-off-by: Thedi Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

- renamed 'test/' folder to 'software/'
- cleaned up old unnecessary files
Signed-off-by: Theodor Stana <t.stana@cern.ch>

- work on documentation folder structure: adding Makefile to the fig/
  sub-folders of each doc folder; these Makefiles compile the .svg's
  into .pdf's when the doc is compiled. The Makefiles are called by the
  main Makefile of each specific doc
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

- HDL guide is now part of the gateware sub-project
Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Signed-off-by: Theodor Stana <t.stana@cern.ch>