[BLO-V2] Front panel pulse LED leads too long
The leads for the TTL pulse LEDs are too long and can touch the EMC shielding strip at the base of the ELMA crate, causing a short circuit across the LED. This occurs only when the board is introduced in the first slot of the crate and does not destroy the LED, it only prevents it from functioning properly.
For now, the issue will be fixed by sending a memo to the assembly company to cut the leads as short as possible. In V3, the possibility of replacing the TTL pulse LEDs with SMD LEDs should be investigated. Alternatively, one could try to place the LEDs further away from the front panel, avoiding contact with the EMC strip.