Skip to content

C
Conv TTL Blocking - Gateware
Commit 0c3e9fc3 authored by Theodor-Adrian Stana's avatar Theodor-Adrian Stana
Browse files
Options

hdl: moved modules/conv_pulse_gen.vhd to modules/Release/ 

Signed-off-by: Theodor-Adrian Stana's avatarTheodor Stana <t.stana@cern.ch>
parent 83b87d10
Show whitespace changes
Inline Side-by-side
Showing with 8 additions and 8 deletions
modules/Manifest.py
View file @ 0c3e9fc3
...@@ -7,7 +7,6 @@ modules = { ...@@ -7,7 +7,6 @@ modules = {
} }
files = [ files = [
"conv_pulse_gen.vhd",
"reset_gen.vhd", "reset_gen.vhd",
"rtm_detector.vhd" "rtm_detector.vhd"
] ]
modules/Release/Manifest.py
View file @ 0c3e9fc3
files = [ files = [
"conv_regs.vhd", "conv_regs.vhd",
"conv_pulse_gen.vhd",
"conv_man_trig.vhd" "conv_man_trig.vhd"
]; ];
modules/conv_pulse_gen.vhd → modules/Release/conv_pulse_gen.vhd
View file @ 0c3e9fc3
...@@ -93,8 +93,8 @@ entity conv_pulse_gen is ...@@ -93,8 +93,8 @@ entity conv_pulse_gen is
-- Pulse output, active-high -- Pulse output, active-high
-- latency: -- latency:
-- glitch filter disabled: none -- glitch filter disabled : none
-- glitch filter enabled: g_gf_len+5 clk_i cycles -- glitch filter enabled : g_gf_len+6 clk_i cycles
pulse_o : out std_logic pulse_o : out std_logic
); );
end entity conv_pulse_gen; end entity conv_pulse_gen;
...@@ -178,7 +178,7 @@ begin ...@@ -178,7 +178,7 @@ begin
if (pulse_rst = '1') then if (pulse_rst = '1') then
pulse_gf_off <= '0'; pulse_gf_off <= '0';
elsif rising_edge(trig_a_i) then elsif rising_edge(trig_a_i) then
if (en_i = '1') then if (en_i = '1') and (gf_en_n_i = '1') then
pulse_gf_off <= '1'; pulse_gf_off <= '1';
end if; end if;
end if; end if;
...@@ -192,7 +192,7 @@ begin ...@@ -192,7 +192,7 @@ begin
pulse_gf_off_d0 <= '0'; pulse_gf_off_d0 <= '0';
pulse_gf_off_d1 <= '0'; pulse_gf_off_d1 <= '0';
pulse_gf_off_d2 <= '0'; pulse_gf_off_d2 <= '0';
elsif (en_i = '1') then elsif (en_i = '1') and (gf_en_n_i = '1') then
pulse_gf_off_d0 <= pulse_gf_off; pulse_gf_off_d0 <= pulse_gf_off;
pulse_gf_off_d1 <= pulse_gf_off_d0; pulse_gf_off_d1 <= pulse_gf_off_d0;
pulse_gf_off_d2 <= pulse_gf_off_d1; pulse_gf_off_d2 <= pulse_gf_off_d1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment