Skip to content

B
Beam Positoning Monitor - Gateware
Commit 8823f62e authored by Lucas Russo's avatar Lucas Russo
Browse files
Options

emb-sw: simple cleanup

parent 39803243
Hide whitespace changes
Inline Side-by-side
Showing with 7 additions and 17 deletions
embedded-sw/Makefile
View file @ 8823f62e
......@@ -9,8 +9,8 @@ CONFIG_PPRINTF =? 1
#endif
CONFIG_ETHERBONE =? 1
CONFIG_FMC150 ?= 1
CONFIG_FMC516 ?= 1
CONFIG_FMC150 ?= 0
CONFIG_FMC516 ?= 0
# and don't touch the rest unless you know what you're doing.
CROSS_COMPILE ?= lm32-elf-
......@@ -41,7 +41,7 @@ CFLAGS_MEMMGR = -DDEBUG_MEMMGR_FATAL=1 \
-DDEBUG_MEMMGR_SUPPORT_STATS=1 \
-DPOOL_SIZE=2048
CFLAGS_DEBUG = -DDEBUG_PRINT=1 -DFMC150_DEBUG=1
CFLAGS_DEBUG = -DDBE_DBG=1
CFLAGS_PLATFORM = -mmultiply-enabled -mbarrel-shift-enabled
LDFLAGS_PLATFORM = -mmultiply-enabled -mbarrel-shift-enabled \
......
embedded-sw/boards/ml605/board.h
View file @ 8823f62e
......@@ -14,10 +14,6 @@
/* Ethernet MAC definitions */
// dynamic defined through SDB
//#define ETH0_BASE 0x30015000U //ethmac_devl
//#define ETH0_BUF 0x20000000U //ethmac_buf_devl
#define ETH0_BASE 0x30005000U //ethmac_devl
#define ETH0_BUF 0x20000000U //ethmac_buf_devl
#define ETH0_IRQ 0
//#define ETH0_PHY 0
// Taken from ML605 user manual
......@@ -30,12 +26,6 @@
#define ETH_MACADDR1 0x0a
#define ETH_MACADDR0 0x00
// temporary place for these constants. Testing only!
#define ETH_DEST 0
#define ETH_SOURCE (ETH_DEST+6)
#define ETH_TYPE (ETH_SOURCE+6)
#define ETH_END (ETH_TYPE+2)
/*
* Buffer number (must be 2^n)
*/
......@@ -48,7 +38,7 @@
* Buffer size
*/
//#define BUFF_SIZE (0x600-4)
#define BUFF_SIZE (0x800)
#define BUFF_SIZE (0x600)
#define OETH_RX_BUFF_SIZE BUFF_SIZE
#define OETH_TX_BUFF_SIZE BUFF_SIZE
......
embedded-sw/fmc/fmc.mk
View file @ 8823f62e
ifdef CONFIG_FMC150
ifeq ($(CONFIG_FMC150),1)
OBJS_FMC150 += fmc/fmc150/fmc150.o
endif
ifdef CONFIG_FMC516
OBJS_FMC516 += fmc/fmc516/lmk02000.o fmc/fmc516/isla216p25.o fmc/fmc516/fmc516.o
ifeq ($(CONFIG_FMC516),1)
OBJS_FMC516 += fmc/fmc516/lmk02000.o fmc/fmc516/isla216p25.o fmc/fmc516/fmc516.o
endif
OBJS_FMC += $(OBJS_FMC150) $(OBJS_FMC516)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment