Skip to content

O
openMMC
Commit a81ee5c6 authored by Henrique Silva's avatar Henrique Silva
Browse files
Options

Loose the lower thresholds for FMC 12v 

There's a drop in the voltage between the standalone voltage entry and
the value measured at the INA220, which is about 0,6~0,8v, this was
causing the board to always stay between Low-crit and Low-noncrit state.
parent 9550bed6
Hide whitespace changes
Inline Side-by-side
Showing with 10 additions and 9 deletions
modules/sensors/ina220_sdr.c
View file @ a81ee5c6
......@@ -79,10 +79,10 @@ const SDR_type_01h_t SDR_FMC1_12V = {
.sensor_min_reading = 0x00, /* Sensor Minimum reading */
.upper_nonrecover_thr = 205, /* Upper non-recoverable Threshold */
.upper_critical_thr = 200, /* Upper critical Threshold */
.upper_noncritical_thr = 195, /* Upper non critical Threshold */
.lower_nonrecover_thr = 175, /* Lower non-recoverable Threshold */
.lower_critical_thr = 180, /* Lower critical Threshold */
.lower_noncritical_thr = 185, /* Lower non-critical Threshold */
.upper_noncritical_thr = 190, /* Upper non critical Threshold */
.lower_nonrecover_thr = 170, /* Lower non-recoverable Threshold */
.lower_critical_thr = 175, /* Lower critical Threshold */
.lower_noncritical_thr = 180, /* Lower non-critical Threshold */
.pos_thr_hysteresis = 2, /* positive going Threshold hysteresis value */
.neg_thr_hysteresis = 2, /* negative going Threshold hysteresis value */
.reserved1 = 0x00, /* reserved */
......@@ -420,14 +420,15 @@ const SDR_type_01h_t SDR_FMC2_12V = {
.upper_nonrecover_thr = 205, /* Upper non-recoverable Threshold */
.upper_critical_thr = 200, /* Upper critical Threshold */
.upper_noncritical_thr = 195, /* Upper non critical Threshold */
.lower_nonrecover_thr = 175, /* Lower non-recoverable Threshold */
.lower_critical_thr = 180, /* Lower critical Threshold */
.lower_noncritical_thr = 185, /* Lower non-critical Threshold */
.lower_nonrecover_thr = 170, /* Lower non-recoverable Threshold */
.lower_critical_thr = 175, /* Lower critical Threshold */
.lower_noncritical_thr = 180, /* Lower non-critical Threshold */
.pos_thr_hysteresis = 2, /* positive going Threshold hysteresis value */
.neg_thr_hysteresis = 2, /* negative going Threshold hysteresis value */ .reserved1 = 0x00, /* reserved */
.neg_thr_hysteresis = 2, /* negative going Threshold hysteresis value */
.reserved1 = 0x00, /* reserved */
.reserved2 = 0x00, /* reserved */
.OEM = 0x00, /* OEM reserved */
.IDtypelen = 0xc0 | STR_SIZE(SDR_FMC2_12V_ID) , /* 8 bit ASCII, number of bytes */
.IDtypelen = 0xc0 | STR_SIZE(SDR_FMC2_12V_ID), /* 8 bit ASCII, number of bytes */
.IDstring = SDR_FMC2_12V_ID /* sensor string */
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment