Explore projects
-
White Rabbit is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. It can synchronize over 1000 nodes with sub-ns accuracy over fiber lengths of up to 10 km. Commercially available. More info at the Wiki page
Updated -
The VFC is a VME carrier for two VITA 57 (FMC) mezzanines. For more details please refer to the wiki pages. Obsolete project. Replaced by VFC-HD.
Updated -
The nanoFIP test board is used to test the functionality of the nanoFIP design. Apart from the nanoFIP chip, the FielDrive and the FieldTR it houses another Actel FPGA that can access nanoFIP in stand-alone or in memory mode. This FPGA can also communicate through a RS232 port with a windows PC running the NFTC software. The components on the board are placed in such a way that with a focused beam, radiation tests can be performed to the nanoFIP, FielDrive and FieldTR, leaving the rest if the components in a radiation-safe zone. The card has been designed by the company HLP.
Updated -
Projects / AIDA-2020 TLU
OtherA Trigger/Timing Logic Unit designed for use with High Energy Physics beam-tests. Provides a simple and flexible interface for fast timing and triggering signals at the AIDA pixel sensor beam-telescope. Connects to a FPGA carrier card via a FMC connector.
( N.B. Use the sub-project Git repositories, not the top level repository )
Updated -
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
Updated -
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
Updated -
This project covers the hardware development of the White Rabbit switch.
Updated -
Gateware (VHDL) for the level conversion board Conv TTL Blocking in VME64x form factor between TTL and blocking levels. More info at the Wiki page
Updated -
Detailed documentation on how to get ready to work with the Simple PCI Express Carrier, including hardware deployment instructions, full required toolchain setup and and a collection of step-by-step demonstrative tutorials.
Updated -
A software suite written in Python to help with production tests of PCBs. AKA PTS.
%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.
Updated -
Gateware (HDL design) for FMC ADC 100M 14b 4cha on SPEC and SVEC carriers.
Updated -
Production and functional tests for FMC TDC 1ns 5cha.
Updated -
-
-
Common gateware for the different level conversion circuits.
Updated -
Hardware design of Conv TTL Blocking. Includes schematics, PCB layout and manufacturing files. More info at the Wiki page
Updated -
Production and functional tests for Conv TTL Blocking. More info at the Wiki page
Updated -
-
Gateware (HDL design) for FMC ADC 400k 18b 4cha iso on SPEC and SVEC carriers.
Updated -
A carrier for two low pin count FPGA Mezzanine Cards (VITA 57), analog inputs and fail-safe functionality. It has memory and clocking resources and supports the White Rabbit timing and control network. Stand-alone board for use in a 'pizza-box'. More info at the Wiki page
Updated