Explore projects

White Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.

Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page

FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page

This project defines data structures, to be embedded in the FPGA memory address space, to enumerate the devices that have been synthetized in the current design. The same structure is also used as a simple flash file system. AKA Self-Describing Bus (SDB) Specification for Logic Cores. The layout is simple enough to be parsed both by the host and by the internal soft-core, if any.

The documentation is public, and related code is GNU GPL licensed.

A Time to Digital Converter core for Spartan 6 FPGAs.

A level conversion board between TTL and 24V blocking levels in VME64x form factor. The project uses a rear transition module for connectivity and a front module with the active conversion and diagnostics electronics. More info at the Wiki page

A project to host all software and hardware developments related to testing the White Rabbit switch.

A cute-wr is a compact WR-node implementation with minimum components required. The initial design is derived from SPEC, but would work in an opposite manner as a FMC wr-nic, providing 2 DIO channels, external CLK input, EEPROM, JTAG, RS232, and expandable IOs through FMC connector. The gateware and software of cute-wr would also keep maximum compatibility with SPEC. Project is obsolete. See cute-wr-dp for a similar board.

The GSI Timing Starter Kit is a functional snapshot of the eventual FAIR timing system, which is under active development. It demonstrates real-time coordination of two front-end equipment controllers. The product consists of a data master (Linux PC) which coordinates events, a timing master which synchronizes clocks (White Rabbit switch), and two front-end equipment controllers (either SPECv4 or SCUv2).

Software for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

The FMC bus abstraction implements a Linux kernel bus named fmc. This allows to deal with FMC mezzanines in a carrier-independent way

This project guides new users to start in the White Rabbit “World” with simple experiments. The starting kit uses two SPEC + FMC-DIO cards. Each node allows basic operations such as input timestamping or programmable output pulse generation. Additionally, specific software and gateware layers allow to use it as a standard network interface card implementing the White Rabbit technology functionalities.

Software support for the SVEC board, including kernel and user-space Linux code.

Libre-FDATool is a Python package aimed at helping in the analysis and design of HDL filters from high-level specifications. This Free/Libre Open Source software supports both VHDL and Verilog code generation and relies on a collection of Free scientific and EDA tools for providing advanced features -- simulation, graphics, debugging, etc.

In order to overcome the problems often related with deploying open design toolchains from the ground up across different host environments, Libre-FDATool and the associated third-party tools are alternatively distributed in a customized GNU/Linux virtual machine image. This virtualized solution is ready to use right out of the box and can be easily deployed by only using free software in any mainstream Operating System (GNU/Linux, Windows, OS-X, Solaris).

Distribution of clock signals over a White Rabbit network. It uses an PLL with a numerically controlled (DDS) oscillator to extract the characteristics of a signal that in turn are distributed over a White Rabbit network to receiving nodes with a DAC that regenerate exactly the same signal in phase. More info at the Wiki page

Detailed documentation on how to get ready to work with the Simple PCI Express Carrier, including hardware deployment instructions, full required toolchain setup and and a collection of step-by-step demonstrative tutorials.

A software suite written in Python to help with production tests of PCBs. AKA PTS.

%(red)This pts-base project is used to re-organise the current pts project In the future this project will replace the existing pts project.

More info at the Wiki page

Production and functional tests for FMC ADC 100M 14b 4cha.

Production and functional tests for FMC TDC 1ns 5cha.

SDB (Self-describing Bus) allows to enumerate the cores that are live in the current FPGA binary, either from the host computer or from the internal soft-core CPU in the FPGA itself. The project provides the software support and the specification. More info at the Wiki page