Explore projects

A low cost, low complexity FMC carrier based on Xilinx Artix-7

Production and functional tests for the MasterFIP.

PCIe to VME bridge. More info at the Wiki page

A USB controlled switch box with 1 to 4 switching. Can send out a reference voltage. Multiple configurations possible. Used for the calibration of ADC, TDC and Fine delay mezzanines. More info at the Wiki page

Gateware for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Gateware (HDL design) for MasterFIP.

A project to host all software and hardware developments related to testing the White Rabbit switch.

A fully open electronic watch project featuring an integrated GPS receiver. More info at the Wiki page

Host-side software support for the TDC FMC on the SPEC and SVEC FMC carriers.

More info at the Wiki page

HW project: https://www.ohwr.org/project/fmc-tdc/wiki

This project contains gateware for the Distributed IO Tier demonstrator according to the CERN Warm Interlocks specification

Common gateware for the different level conversion circuits.

Software for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Software support for the SVEC board, including kernel and user-space Linux code.

This is a port of an older Linux ptpd to support White Rabbit extensions and run both in hosted and freestanding environment. In the future we plan to replace it with PPSI, which has a much better design, but ptp-noposix is currently working pretty well despite being difficult to maintain.

The FMC bus abstraction implements a Linux kernel bus named fmc. This allows to deal with FMC mezzanines in a carrier-independent way

Active 32/64 channels 19" patch panel for FPGA boards, with robust 5V TTL I/Os, configurable through I²C and USB-C. More info at the Wiki page

This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

fmc-adc-100m14b14cha

For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

More info at the Wiki page