Explore projects

The Fmc ADC 100M 14b 16cha DAC 2M 14B 4cha is a 16 channel 100MSPS 14 bit ADC and 4 channel 2MSPS 14 bit DAC card in FMC (FPGA Mezzanine Card) format. The board is also equipped with 4 DIO channels.

Local image descriptors are calculated for every 800x600 image up to 36 fps. All implemented in Handel-C, they provide energy with unsigned 8 bit fixed-point precision, as well as phase and orientation with Q7.2. The implementation is based on a multi-oriented bank of Gabor filters.

Gateware (HDL design) for FMC ADC 100M 14b 4cha on SPEC and SVEC carriers.

Hardware design of Conv TTL Blocking. Includes schematics, PCB layout and manufacturing files. More info at the Wiki page

An LPC FMC board which seeks to distribute digital I/O. It is designed to operate at least at 10 MHz, however a better design could allow this board to operate at much higher frequencies. This board is compatible with "PMOD" Connectors.

CompactRIO module with White Rabbit functionality. LabVIEW support, front-panel connector with 10 I/O lines.

More info at the Wiki page

Neo51 is an open source hardware based on 89V51 microcontroller. It has a dual mode feature selectable via DIP switch supporting arduino hardware compatible ports and the legacy 8051 ports.

An FMC board with an analog 125 MS/s input and an analog 600 MS/s output for RF applications.

More info at the Wiki page

nanoFIPdiag is a WorldFIP node dedicated to monitoring and diagnostics. It uses the nanoFIP chip in stand-alone mode and echoes the received data (through hardwired contacts it copies the received payload to the produced one). The module is designed to be radiation-tolerant

A fully open electronic watch project featuring an integrated GPS receiver. More info at the Wiki page

Gateware (HDL design) for FMC TDC 1ns 5cha on SPEC and SVEC carriers.

SPIETBOX is a board developed around a SPARTAN-3 FPGA in order to process TTL and SSI encoders. The board is design to work in stand alone or connected to a SPICONTROLLER via the SPI interface.

SAMbuCa I2PS. Used in the SAMbuCa project. More info at the Wiki page

The PZ-TIO is a carrier board for a PicoZed 7015 Zynq System on Module (SoM) supporting White Rabbit in the Zynq PL. It provides Ethernet, UART, SD card and USB peripherals for the Zynq PS running Ubuntu 18; SFPs, WR clocks, and GPIO for the PL.

The TimEX3 is a multipurpose compact PCI board designed to perform simple to medium complex logical functions. It is mainly used for the synchronization system of SOLEIL (signal duplication, top-up gating, etc.). This board is based on a Spartan-6 FPGA and PLX PCI9030 interface. It is designed with KiCad software, and released under CERN OHL License.

Host-side software support for the TDC FMC on the SPEC and SVEC FMC carriers.

More info at the Wiki page

HW project: https://www.ohwr.org/project/fmc-tdc/wiki

MasterFIP is an Open Hardware implementation of a WorldFIP master node.

Project holding machines and mechanical hardware tools as subproject.

This project contains gateware for the Distributed IO Tier demonstrator according to the CERN Warm Interlocks specification